VIAIR Compressor Kit - CONSTANT DUTY Compressor system kit from VIAIR CONSTANT DUTY OBA version with compressor 450C delivery rate 51 L/ minute for 12Volt operating voltage incl. 9.5L tank and mounting kitTechnical data:     suitable for inflating tyres and operating small air tools or air horns    max. voltage: 13,8 Volt    max. 10 bar working pressure    max. current consumption: 23 amps    max. ambient temperature for operating the compressor: 70° Celsius    min. Ambient temperature for compressor operation: -40° Celsius    max. possible operating time e.g. at 22°C ambient temperature approx. 60 minutes    Protection class: IP67Exemplary filling times for the compressor system kit of VIAIR design CONSTANT:Air receiver with 10 litres : - 0 to 9.9 bar - 3 min. 02 sec. - 7.5 to 9.9 bar - 59 sec. Tyre size 35" x 12.50" :- 0 to 2.0 bar - 6 min 55 sec.- 1.0 to 2.0 bar - 3 min. 30 sec. Tyre size 37" x 12.50" : - 0 to 2.0 bar - 7 min 56 sec. - 1.0 to 2.0 bar - 4 min. 09 sec.Compressor system kit from VIAIR model CONSTANT has the following scope of delivery:1 x VIAIR 450C compressor 1 x 9,5 l air tank 1 x 10m air hose 1 x 1/4" quick coupling (F) 1 x 1/4" NPT connector (F) 1 x Control panel with on/off switch and pressure gauge 1 x Pressure switch with relay (7,2 - 10 bar) 1 x Reducer (1/8" NPT F to 1/4" NPT M)

CONTINOUS DUTY, 485C CE-Compressor, 12V Specifications:   12-volt Permanent magnet motor Duty cycle: 100 % at 200 PSI (13.7 bar) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19 litres) Max. Power consumption: 23 Amps Protection class: IP67 Dimensions: 270 mm L x 105 mm W x 165 mm H Net weight: 4.99kg. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:Stainless steel valves guarantee long-lasting and optimised shut-off timesgenerously dimensioned cooling fins on design-optimised cylinders ensure maximum air dissipation and a longer service lifeAnodised cylinder running surfaces increase protection against abrasionthe piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life propertiesthe motors are protected against splash water and are therefore highly resistant to corrosionintegrated, automatic overheating protection protects the longevity of the compressorsCE labellingTechnical data:    2.5 gallons (approx. 9.5 litres) VIAIR air tank (200 PSI / 13.7 bar) 485C Stealth Black VIAIR compressor with thermal overload protection Digital tyre inflation gun with 180 PSI (12.4 bar) Braided black spiral hose with quick-release coupling 1/4’ NPT quick coupling bolt (F) 1/4’ NPT quick coupling (F) Dashboard indicator with ON / OFF switch Sealed pressure switch (165 PSI (11.3 bar) on, 200 PSI off (13.7 bar) Reducer 1/8‘ NPT (F) to 1/4’ NPT (M) Reducer 3/8‘ NPT (F) to 1/4’ NPT (M) 1/4’ NPT 250 PSI safety valve 1/4’ NPT drain cock (3) 1/4’ NPT compression fittings Suitable for tyres up to 37 inches 4-inch protective sleeves (grommet strips) for air line hoses - Make sure the air line hoses are protected from the sharp edges of the borehole with the supplied grommet strip.Please note: Use thread sealant for proper installation. Thread tape is not recommended. When properly sealed, the recommended torque for 1/8’ is 13.5 Nm. The recommended torque for 1/4‘ and 3/8’ is 22 Nm.  

VIAIR 330C-HG 200 PSI (13.8 bar), 12V CE compressor Specifications/ technical data: 12-volt Permanent magnet motor Duty cycle: 100% @ 100 PSI ( 6.9 bar ) Duty cycle: 50% @ 200 PSI ( 13.8 bar ) Max. Working pressure: 200 PSI Max. Air tank size: 5.0 gallons (approx. 19L ) Max. 12V power consumption: 14 amps Protection class: IP67 Max. Ambient temperature: +158°F (70°C) Min. ambient temperature: -40°F (4°C) Dimensions: 230 mm L x 101 mm W x 171 mm H Net weight: 3.8kg Hyper Grade (HG) compressors are specifically designed for filling air receivers and feature a head assembly with an innovative patented head design for better heat dissipation. All HG compressors are CE certified and have excellent sealing properties against the elements. In addition, all HG compressors are equipped with a separate stainless steel braided PTFE lined supply hose and check valve assembly.  Features: Thermal overload protection Vibration isolators Mounting hardware Heavy duty 1/4″ NPT check valve Stainless steel braided PTFE coated guide hose Air line for remote mounted air cleaner Remote mounted air filter assembly (2) Replacement air filter elements Assembly instructions Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Application noteFor further application information, please refer to the product data sheet