Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 24 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: stainless steel valves guarantee long-lasting and optimum shut-off times generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life anodised cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics the motors are protected against splash water and thus maximally resistant to corrosion an integrated, automatic overheating protection protects the longevity of the compressors CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  Tyre inflator incl. pressure gauge  Aluminium stand or plate  Connection from stand to compressor by vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 24Volt max. current consumption: 15 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. with on/off switch  Dimension: length 28 cm / width 15 cm / height 19 cm  Weight: 4,8 Kg  Protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: - 0 to 2 bar - 3 min 00 sec. - 1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  - 0 to 2 bar - 4 min 20 sec. - 1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  - 0 to 2 bar - 5 min. 20 sec. - 1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things. 

Replacement - filter elements for Viair compressors. Foam filter elements with filter fleece for air filters of Viair compressors.- for metal housing (3/8" connection, disc shape, content 3 pieces). Ideal as replacement for frequent use in dusty areas

VIAIR 5-in-1 Inflator/Air Deflator Spiral Hose Fabric Reinforced 120 PSI MANOMETER - fabric reinforced spiral hose- Continuous inflation/deflation- Internally braided with quick release couplings- Intermittent deflation- 1/4" quick release coupling with male thread- 3-piece set of inflation nozzles- Air chuck with locking lever- incl. storage bagPlease store the hose in the supplied bag when not in use.Make sure that the hose does not come into contact with the head of the compressor during use (risk of melting).

88P-SXS Portable Compressor For up to 33″ TiresNAVIA-00082– 120 PSI / 1.97 CFM VIAIR 88P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit. SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 25 min. @ 30 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP53 Max. Ambient Temp: +158°F Min. Ambient Temp: -4°F Dimensions: 9.8″L x 3.2″W x 5.6″H Net Weight: 5.30 lbs. Power Cord Length: 10 ft. Air Hose Length: 16 ft. Power Cord: 10 ft. / Air Hose: 16 ft. FEATURES: 120 PSI Pressure Gauge LED Work Light / Power Indicator Dual Battery Clamps w/2-Pin SAE Connector Permanent 2-Pin SAE Connector for battery with 20-amp Inline Fuse Holder 2-Pin SAE Connector with 20-amp Inline Fuse Holder Solid Brass Twist-on Tire Chuck Heavy Duty Carry Bag with Straps and Hardware for Mounting 3 pc. Inflation Tips Kit* Presta Valve Adaptor * Mounted above Rear Compressor Feet FILL RATES:31″ X 10.5″ 0 to 30 PSI 3 min. 30 sec. (± 10 sec.)15 to 30 PSI 2 min. 10 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 5 min. 15 sec. (± 15 sec.)15 to 40 PSI 3 min. 00 sec. (± 05 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 88P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 88P does not work with the VIAIR Winterization Kit.

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

TLC PLUS Automatic Portable Compresso rP/N 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag RECOMMENDED COMPONENTS 1.8m Portable Compressor Air Extension Hose BICYCLE TYRE INFLATION RATES:  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar  0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar  25mm 10 sec. 18 sec.  35mm 6 sec. 13 sec.  2.0″  11 sec. 22 sec.  28mm 13 sec. 21 sec.  38mm 7 sec. 15 sec.  2.3″  14 sec. 26 sec.  30mm 16 sec. 25 sec.  42mm 8 sec. 17 sec.  2.6″  16 sec. 30 sec.  32mm 18 sec. K.A.  45mm 9 sec. 19 sec.  3.0″  18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 90P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 90P does not work with the VIAIR Winterization Kit.

TLC PRO Air Compressor Kit P/N 42046 – 150 PSI / 2.62 CFM The TLC PRO was made for the adventure enthusiast who wants the best equipment for on-the-go bike maintenance and vehicle tire inflation. The kit features a 30ft coil hose, a shop-style inflator with rotating Presta and Schrader attachments and a blow gun. The compressor charges the air reservoir to 150PSI, storing enough air to provide a blast for seating tubeless bicycle tires, performing blowing tasks, running certain air tools and it is capable of inflating RV and truck tires up to 35”. The TLC PRO comes in a deluxe carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it.SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 150 PSI Max. Amp Draw: 30-Amps Ingress Protection Rating: IP54 Dimensions: 10.87″L x 5.83″W x 7.48″H Net Weight: 11.80 lbs. Power Cord Length: 8 ft. Air Hose Length: 30 ft. * For 12V Only. FEATURES: Shop-Style Inflator with 160 PSI Gauge Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose Blow Gun Extruded Aluminum Air Tank 2-Pin SAE Connection with Battery Terminal and Clamp Options 40-Amp Inline Fuse Holder Vibration-Resistant Diamond-Plate Sand Tray Deluxe Carry Bag  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2 Bar – 0-50 PSI/ 0-3,4 Bar  0-20 PSI/0-1,3 Bar – 0-40 PSI/0-2,7 Bar  25mm - 5 sec. 10 sec.  35mm - 3 sec. 6 sec.  2.0″  - 5 sec. 12 sec.  28mm - 7 sec 12 sec.  38mm - 3 sec. 7 sec.  2.3″  - 6 sec. 15 sec.  30mm - 8 sec. 14 sec.  42mm - 4 sec. 9 sec.  2.6″  - 7 sec. 17 sec.  32mm - 10 sec. K.A.  45mm - 4 sec. 10 sec  3.0″  - 9 sec. 19 sec. FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 00 sec. (± 10 sec.)15 to 30 PSI 1 min. 35 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 4 min. 20 sec. (± 10 sec.)15 to 30 PSI 2 min. 05 sec. (± 05 sec.)35″ X 12.5″ 0 to 30 PSI 5 min. 20 sec. (± 15 sec.)15 to 30 PSI 2 min. 45 sec. (± 05 sec.)* Tolerances (±) define a range within which actual performance may fall. Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 400P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 400P does not work with the VIAIR Winterization Kit.  

6 ft. portable VIAIR compression air hose extension hose suitable for VIAIR compressors: 70P, 77P, 85P, 87P and 88P.  Features: Kupplung: 8V1 (M) x 8V1 (F) Twist-On Tire Chuck

Features: 0 - 200 PSI / 0 - 13,8 bar Close-Ended 1/4″ Quick Connect Coupler & Stud Deluxe Carry Bag Please note:The article does NOT fit the 440P compressor (since it has a 3/8 "connection).

VIAIR 400P - Mobile compressor 12 Volt Compressor set from VIAIR model 400P with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version. As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life characteristics - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.  The VIAIR compressor kit model 400P has the following scope of delivery:  7.5 metre spiral air hose  2.5 metre battery cable with battery terminals  tyre inflator incl. pressure gauge  aluminium stand or plate  connection from stand to compressor by vibration-reducing silent blocks  replaceable air filter  battery cable with integrated fuse holder incl. 40 amp fuse  three additional valve adapters  a high quality carrying bag  The VIAIR Compressor Kit Model 400P has the following technical features: suitable for tyre sizes max. 35x12.50R15  delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  max. air pressure: 10 Bar  max. voltage: 12 Volt max. current consumption: 30 amps   max. ambient temperature for compressor operation: 70° Celsius  min. ambient temperature for compressor operation: -40° Celsius  max. possible operating time, e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should be paused for approx. 40 minutes. compressor should pause for approx. 40 minutes  with on/off switch  dimension: length 28 cm / width 15 cm / height 19 cm  weight: 4.8 Kg  protection class: IP54 Example filling times for the VIAIR Compressor Kit Model 400P: Tyre size 31 x 10.50 R15: 0 to 2 bar - 3 min 00 sec.  1 to 2 bar - 1 min. 35 sec.  Tyre size 33 x 12.50 R15:  0 to 2 bar - 4 min 20 sec.  1 to 2 bar - 2 min. 05 sec.  Tyre size 35 x 12.50 R15:  0 to 2 bar - 5 min. 20 sec.  1 to 2 bar - 2 min. 45 sec. Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution? Our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and quickly make the right choice. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment. Our new compressor chart compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory port. You can quickly determine the right compressor at a glance. Our smallest model, the VIAIR 75P is a mobile compact solution for emergencies or occasional off-road use with tyres up to 29". The 75P is powered from the cigarette lighter. For larger tyres and fast pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic on/off switch are recommended. Those who regularly go off-road, need to inflate thick 37" tyres or want to power pneumatic tools on the road should opt for the Constant Duty OnBoard-Air Kit for permanent installation. Please note:  We have adjusted our Viair range. You will still find all current products. We have decided to reduce the range in order to guarantee better availability, among other things.  Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.

Compressor set from VIAIR model 400P automatic with a delivery rate of 65 litres/minute and 12 volt operating voltage in a portable version with ‘comfort operation’ As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features:   Stainless steel valves guarantee long-lasting and optimum shut-off times generously dimensioned cooling fins on design-optimized cylinders ensure maximum air dissipation and longer service life Anodized cylinder running surfaces increase protection against abrasion the piston motor with PTFE piston rings ensures the lowest friction and therefore optimum smooth running and service life the motors are protected against splash water and are therefore highly resistant to corrosion integrated, automatic overheating protection protects the longevity of the compressors CE marking The VIAIR compressor kit model 400PA has the following scope of delivery: 9.5 meter spiral air hose  2.5 meter long battery cable with battery terminals  Tire inflator incl. pressure gauge  Aluminum stand or plate  Connection from the base to the compressor via vibration-reducing silent blocks  Replaceable air filter  Battery cable with integrated fuse holder incl. 40 amp fuse  Three additional valve adapters a high-quality carrying bag The VIAIR compressor kit model 400PA has the following technical features: suitable for tyre sizes max. 35’  Automatic switch-off when no air is required. Simply press the inflation gun to switch the compressor on again  Delivery volume: at 0 bar 65 l/min, at 3 bar 44 l/min, at 5 bar 33 l/min and at 7 bar 22 litres per minute  Max. air pressure: 10 bar  Max. voltage: 13.8 volts  max. current consumption: 30 amps  max. ambient temperature for operating the compressor: 70° Celsius  min. Ambient temperature for operating the compressor: -40° Celsius  max. possible operating time e.g. at 22°C ambient temperature: 20 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes  Dimensions: length 28 cm / width 15 cm / height 19 cm  Weight: 4.9 kg  Protection class: IP54  Do decisions put you under too much pressure? Which VIAIR compressor is the right one for me? Is the small mobile 75P for the cigarette lighter enough or should it be the Constant Duty built-in solution?If you're stuck for ideas, our new VIAIR compressor chart (see pictures) is guaranteed to help you get back on track and make the right choice quickly. VIAIR is the market leader for automotive and off-road compressors and sets the standard in terms of workmanship and performance. As a direct importer of VIAIR products, we have a whole range of solutions in our assortment.Our new compressor table compares the Nakatanenga VIAIR range by tyre size, power source, capacity/performance and accessory connection. The right compressor can be quickly determined at a glance. Our smallest model, the VIAIR 75P, is a compact mobile solution for emergencies or occasional off-road use with tyres up to 29’. The 75P is powered from the cigarette lighter. For larger tyres and rapid pressure adjustment, battery-powered compressors such as the VIAIR 400P or 400P-A with automatic switch-on and switch-off are recommended. If you are regularly in off-road use, need to inflate thick 37’ tyres or want to power pneumatic tools on the road, you should opt for the Constant Duty OnBoard-Air Kit for permanent installation.Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors.Please note:We have adapted our Viair range. You will still find all standard products in our shop. One of the reasons we have decided to reduce the range is to guarantee better availability.

VIAIR Tyre Pressure Tester with Drain Function When driving on Sand it is a common practice to air-down the tires to gain more traction. The problem is should you air down to much, you risk damaging wheel and tire, and if you don't air-down enough the desired effect doesn't show. Also, after your done playing in the sand your tire pressure needs to get back to a comfortable riding pressure. In order for your tires to always have the right pressure this gauge also packs a deflate button, so you always know whats going on with out experimenting around. The Instuctions are simple and wel known from gas-stations: attatch, gauge the pressure, air down using the lever, gauge again and done. Available in two different versions, depending on the size and pressure range you're working in. Modell Diameter Pressure range 00032 38mm / 1.5" 0-4.1 bar (60 PSI) 90073 64mm / 2,5" 0-6.9 bar (100 PSI)  

VIAIR Tank Port Fittings Kit for Compressors Set of 5 pieces, for 200 PSI rated systems. Features: 2 1/4" NPT-Plugs 1/4" NPT Drain Cock 1/4" NPT Compression Fitting 200 PSI Safety Valve

VIAIR Air Connection Extension 5 Piece Kit Features: 1/4″ NPT (F) Quick Connect Coupler 1/4″ NPT (F) Quick Connect Stud (2) 1/4″ NPT Compression Fittings (For 1/4″ Line) 15 ft. Air Line Tubing 3 Air Line Clips 5″ Continuous Grommet

Mounting kit for compressed air system Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1) 20 Ft. Lead Wire with Inline Fuse (1) 1/4” (F) NPT Tee Fitting (1) 1/4” to 1/8” NPT Reducer (1) 1/4” Quick Connect Coupler (1) 1/4” (F) NPT Quick Connect Stud (1) 1/4” (M) NPT Compression Fitting* (1) 1/4” (M) NPT Compression Tee Fitting* (3) Insulated (F) Terminal Connectors (2) Insulated (M) Terminal Connectors (2) Quick Splice Connectors (3) Ring Terminals (6) Cable Ties (3) Cable Tie Brackets (3) Air Line Clips (1) Continuous Grommet (2) Mounting Screws, Washers, Nuts (1) Instruction Manual * All compression fittings are for 1/8” O.D. air line.

VIAIR mounting kit for compressed air system Custom designed to work with VIAIR Compressors, this hookup kit includes a Pressure Switch with Built-in Relay and an illuminated dash panel gauge with built-in ON/OFF switch. Also comes with 20 ft. of positive extension wire, 20 ft. of air delivery line tubing, as well as every part you will need to hook up to an air tank for a multi-purpose onboard air system. (1) Illuminated Dash Panel Gauge (1) 20 Ft. 1/4” O.D. Air Line Tubing (1) Pressure Switch with Built-In Relay (1) 20 Ft. Lead Wire with Inline Fuse (1) 1/4” (F) NPT Tee Fitting (1) 1/4” to 1/8” NPT Reducer (1) 1/4” Quick Connect Coupler (1) 1/4” (F) NPT Quick Connect Stud (1) 1/4” (M) NPT Compression Fitting* (1) 1/4” (M) NPT Compression Tee Fitting* (3) Insulated (F) Terminal Connectors (2) Insulated (M) Terminal Connectors (2) Quick Splice Connectors (3) Ring Terminals (6) Cable Ties (3) Cable Tie Brackets (3) Air Line Clips (1) Continuous Grommet (2) Mounting Screws, Washers, Nuts (1) Instruction Manual * All compression fittings are for 1/8” O.D. air line.