VIAIR 5-in-1 Inflator/Air Deflator Spiral Hose Fabric Reinforced 120 PSI MANOMETER - fabric reinforced spiral hose- Continuous inflation/deflation- Internally braided with quick release couplings- Intermittent deflation- 1/4" quick release coupling with male thread- 3-piece set of inflation nozzles- Air chuck with locking lever- incl. storage bagPlease store the hose in the supplied bag when not in use.Make sure that the hose does not come into contact with the head of the compressor during use (risk of melting).

88P-SXS Portable Compressor For up to 33″ TiresNAVIA-00082– 120 PSI / 1.97 CFM VIAIR 88P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Connect to a tire valve stem and turn the unit on. Tire pressure can easily be checked using the gauge incorporated into the top of the unit. SPECIFICATIONS: 12-Volt Permanent Magnetic Motor Duty Cycle: 25 min. @ 30 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP53 Max. Ambient Temp: +158°F Min. Ambient Temp: -4°F Dimensions: 9.8″L x 3.2″W x 5.6″H Net Weight: 5.30 lbs. Power Cord Length: 10 ft. Air Hose Length: 16 ft. Power Cord: 10 ft. / Air Hose: 16 ft. FEATURES: 120 PSI Pressure Gauge LED Work Light / Power Indicator Dual Battery Clamps w/2-Pin SAE Connector Permanent 2-Pin SAE Connector for battery with 20-amp Inline Fuse Holder 2-Pin SAE Connector with 20-amp Inline Fuse Holder Solid Brass Twist-on Tire Chuck Heavy Duty Carry Bag with Straps and Hardware for Mounting 3 pc. Inflation Tips Kit* Presta Valve Adaptor * Mounted above Rear Compressor Feet FILL RATES:31″ X 10.5″ 0 to 30 PSI 3 min. 30 sec. (± 10 sec.)15 to 30 PSI 2 min. 10 sec. (± 05 sec.)33″ X 12.5″ 0 to 30 PSI 5 min. 15 sec. (± 15 sec.)15 to 40 PSI 3 min. 00 sec. (± 05 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 88P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 88P does not work with the VIAIR Winterization Kit.

300P SXS - Portable Compressor P/N 30032 – 150 PSI / 2.30 CFM VIAIR 300P Side by Side Edition comes with 2-PIN SAE connectors for easy connection and a modified bag that allows a secure mounting solution on your Side by Side or UTV. This compressor is capable of inflating up to 33-inch tires easily by simply connecting the 2-Pin SAE Connector to your battery. Comes with the permanent 2-Pin SAE Connector and 2-Pin SAE to battery clamp for convenience. Tire pressure can be checked using the 5-in-1 Inflator/Deflator inline pressure gauge. Now includes: Presta Valve Adapter! SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 33% @ 100 PSI Max. Working Pressure: 120 PSI Max. Amp Draw: 20-Amps Ingress Protection Rating: IP54 Dimensions: 9″L x 4.9″W x 7.5″H Net Weight: 8.70 lbs. Power Cord Length: 8 ft. Air Hose Length: 25 ft. FEATURES Thermal Overload Protector 5-in-1 Inflator/Deflator Air Hose with Inline 60 PSI Gauge Aluminum Sand Tray with Vibration Isolators Deluxe Dual Compartment Carry Bag 40-amp Inline Fuse Holder Dual Battery Clamps 3 pc. Inflation Tips Kit Presta Valve Adaptor FILL RATES31″ X 10.5″ 0 to 30 PSI 3 min. 25 sec. (± 10 sec.)15 to 30 PSI 2 min. 00 sec. (± 05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 00 sec. (± 10 sec.)15 to 30 PSI 2 min. 45 sec.(± 05 sec.) Please Note: The air hose supplied with this kit may become brittle from prolonged exposure to UV/sunlight. – Stow when not in use. Never allow the hose to come into contact with the head of the compressor during use (melting hazard). The use of the included air hose is not recommended in sub zero or freezing conditions. The 300P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 300P does not work with the VIAIR Winterization Kit.

Escapade Constant Duty Compact  Onboard Air System For up to 37″ TiresP/N 50003 – 110/145 PSI – 150 PSI / 1.80 CFM VIAIR’s Escapade Constant Duty Compact Onboard Air System is a compact, pre-packaged compressed air solution that features an industry-leading, 150PSI rated, 100% duty 450C compressor, an extruded aluminum tank, and all components needed to install a working system capable of tire inflation and air locker actuation. This OBA System comes complete with an onboard pressure switch, automatic coupler and a tire Inflation Kit. SPECIFICATIONS 12-Volt Permanent Magnetic Motor Duty Cycle: 100% @ 100 PSI  Max. Working Pressure: 150 PSI Max. Amp Draw: 23-Amps Ingress Protection Rating: IP67 Dimensions: 9.38″L x 4″W x 6.75″H Net Weight: 12.5 lbs. FEATURES 450C 150 PSI VIAIR Compressor w/ Thermal Overload Protector (1) Extruded Aluminum Air Tank (1) Sealed Pressure Switch (110 PSI on, 145 PSI off) (Pre-installed) (1) Sealed 40-Amp 4-prong Relay with pre-wired female socket (1) 40-amp Relay Sealed 4-prong relay w/pre-wired female socket (1) Tire Inflation Gun with 160 PSI Gauge (1) 30ft. Coil Hose with Quick Connect and Stud (1) Rubber Tipped Blow Gun (1) Quick Connect Coupler (Pre-installed) (1) 1/4″ 175 PSI Safety Valve (Pre-installed) (1) 1/4″ NPT Plugs Kit (Pre-installed) (1) 1/8″ Drain Cock (Pre-installed) (1) 1/4″ NPT to 1/8″ BSP Adaptors (2) Air Filter Housing w/ Replacement Air Filter Elements (1) 20ft. Freeze Resistant 12-Gauge Wire w/ Inline Fuse Holder (1) FILL RATES31″ X 10.5″ 0 to 30 PSI 4 min. 05 sec. (±10 sec.)15 to 30 PSI 2 min. 10 sec. (±05 sec.)33″ X 12.5″0 to 30 PSI 5 min. 30 sec. (±15 sec.)15 to 30 PSI 2 min. 50 sec. (±05 sec.)35″ X 12.5″ 0 to 30 PSI 6 min. 55 sec. (± 15 sec.)15 to 30 PSI 3 min. 30 sec. (± 10 sec.)37″ X 12.5″0 to 30 PSI 7 min. 56 sec. (± 15 sec.)15 to 30 PSI 4 min. 09 sec. (± 10 sec.) Please Note: Use thread sealant for proper installation. Thread tape is not recommended.Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs.

TLC PLUS Automatic Portable Compresso rP/N 00190 – 120 PSI / 1.61 CFM The TLC PLUS is a high-performance compact compressor meant for on-the-go bike and vehicle tire inflation. The kit features a 30ft coil hose and a shop-style inflator with rotating Presta and Schrader attachments. The compressor charges to 120PSI, storing enough air to provide a blast for seating tubeless bicycle tires, and it is capable of inflating vehicle tires up to 31”. The TLC PLUS comes in a durable carry bag and can be used as a portable or hard-mounted to the vehicle using the SAE battery clamps or terminal ring attachments included. The compact dimensions make it easy to store in your vehicle, keeping it out of the way and ready whenever you need it. Technical data: 12-volt Permanent-magnet motor Duty cycle: 30 min. @ 30 PSI / 2.07 Bar Max. Working pressure: 120 PSI / 8.27 Bar Max. Current consumption: 23-Amp Protection class: IP54 Dimensions (LxWxH): 17.27cm x 9.4cm x 16.5cm Net weight: 5.75 lbs Power Cord Length: 12 ft. Scope of delivery: Thermal Overload Protector Shop-Style lnflator with 120 PSI Gauge 120 PSI / 8.27 Bar pressure gauge with rubber boot Fully Rebuildable Presta Head Attachment 90° Twist-on Schrader Attachment 30ft. Inside Braided Coil Hose 2-Pin SAE Connection with Battery Terminal and Clamp Options Deluxe carry bag RECOMMENDED COMPONENTS 1.8m Portable Compressor Air Extension Hose BICYCLE TYRE INFLATION RATES:  ROAD  GRAVEL/HYBRID  MOUNTAIN  0-70 PSI/0-4,8 Bar – 0-100 PSI/0-6,8 Bar  0-30 PSI/0-2,7 Bar – 0-50 PSI/0-3,4 Bar  0-20 PSI/0-1,38 Bar – 0-40 PSI/0-2,7 Bar  25mm 10 sec. 18 sec.  35mm 6 sec. 13 sec.  2.0″  11 sec. 22 sec.  28mm 13 sec. 21 sec.  38mm 7 sec. 15 sec.  2.3″  14 sec. 26 sec.  30mm 16 sec. 25 sec.  42mm 8 sec. 17 sec.  2.6″  16 sec. 30 sec.  32mm 18 sec. K.A.  45mm 9 sec. 19 sec.  3.0″  18 sec. 35 sec. Inflation times vehicle tyre size: 0-20 PSI/195/70R14 :20 to 30 PSI / 1.4 to 2.1 BAR - 35 sec (± 05 sec).30 to 40 PSI / 2 to 2.7 BAR - 40 sec (± 05 sec)225/60R1820 to 30 PSI / 1.4 to 2.1 BAR - 50 sec (± 05 sec)30 to 40 PSI / 2.1 to 2.7 BAR - 1 min. 05 sec. (± 05 sec.)31″x10.5″0 to 30 PSI / 0 to 2.1 BAR - 5 min. 10 sec. (±15 sec.)15 to 30 PSI / 1 to 2.1 BAR 2 min. 45 sec. (±10 sec.) Please Note: Always check your vehicle’s power port rating for maximum amperage before ordering. The 90P does not work with Presta bicycle valves, unless used with a Presta Valve Adapter. The 90P does not work with the VIAIR Winterization Kit.

VIAIR replacement metal filter housing Suitable for the following VIAIR compressors: 420C Compressor460C Compressor480C Compressor300P Portable Compressor300P-RVS Portable Compressor400P Portable Compressor400P Automatic Portable Compressor400P-RV Automatic Portable Compressor400P-RVS Automatic Portable Compressor440P Portable Compressor450P Automatic Portable Compressor450P-RV Automatic Portable Compressor450P-RVS Automatic Portable Compressor

VIAIR 89P-RVS - the compressor especially for campers and motorhomes Technical data:- Suitable for tyre sizes max. 245/70R19.5- Delivery volume: at 0 bar 41.7 L/min, at 3 bar 31.5 L/min, at 5 bar 23.6 L/min and at 7 bar 14.9 litres per minute- Max. working pressure: 120 PSI/8.2 bar- max. voltage: 13.8 volts- max. current consumption: 20 amps- max. ambient temperature for operating the compressor: 70° Celsius- min. ambient temperature for compressor operation: -20° Celsius- max. possible operating time: 25 minutes at 30 PSI- with on/off switch- dimensions (L x W x H): 25cm x 8,1cm x 14,2cm- weight: 2,15 Kg- Protection class: IP53Features:- Stainless steel valves guarantee long-lasting and optimal shutter speeds- generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life- Anodised cylinder surfaces increase protection against abrasion- the piston motor with PTFE piston rings ensures low-friction and optimised smooth running and a long service life- the motors are protected against splash water and thus maximally resistant to corrosion- Integrated, automatic overheating protection for a long compressor service life- CE markingScope of delivery:- 6 metre air hose- 3 metre battery cable with battery terminals- Tyre inflator (solid brass)- Pressure gauge on compressor- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- three additional valve adapters- a high-quality carrying bag Example filling times for the VIAIR compressor kit model 89P-RVS:50 to 60 PSI / 3.4 to 4.1 bar 1 min. 11 sec. (±05 sec.)60 to 80 PSI / 4.1 to 5.5 bar 3 min. 28 sec. (±10 sec.)80 to 90 PSI /5.5 to 6.2 bar 1 minute. 40 sec. (±05 sec.)The model designation "RVS" stands for "RV-Safe", as these compressors have been specially developed and tested for the motorhome market.A mobile and above all portable compressor should never be missing on board a camper or motorhome. The VIAIR 89P-RVS is such a mobile and lightweight 12-volt compressor, specially designed for Class B motorhomes. This compressor inflates most Class B (CP) tyres from 5.5 bar to 6.2 bar (80 to 90 PSI - follow manufacturer's instructions!) in less than 2 minutes. The 89P-RVS has a new and improved longer air hose to reach the tyres comfortably.The tyres are the connecting element between the vehicle and the road. Enormous forces are transmitted over a relatively small area. To be able to guarantee this in the best possible way, regular checking of the tyre pressure is essential, especially for motorhomes. Don't forget to check the spare wheel as well. However, this can be quite inconvenient for many campers, as the spare wheel must first be removed from underneath the floor - something that people tend to do without at the petrol station.For an RV compressor, power is of course crucial. Here, the 89P-RVS offers a maximum working pressure of more than 8 bar - quite sufficient for all compressed air applications you are confronted with as a camper. Please note: The 89P-RVS is not compatible with Presta bicycle valves!Due to the high currents that flow when operating the compressor, it must only be connected directly to the battery via the supplied clamps. However, with the 6m hose, which is also included in the delivery, you can also reach the rear wheels comfortably.As a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Adapters with variable nozzle guides can be found here in our shop. The adapters are compatible with our VIAIR compressors. Please note: We have adapted our Viair range. You will still find all standard products. One of the reasons we have decided to reduce the range is to guarantee better availability.

Replacement - filter elements for Viair compressors. Foam filter elements with filter fleece for air filters of Viair compressors.- for metal housing (3/8" connection, disc shape, content 3 pieces). Ideal as replacement for frequent use in dusty areas

Compressor set from VIAIR model 450P automatic with a delivery rate of 51 litres/minute and 12 volt operating voltage in a transportable version with "comfort operation" Technical data:- Suitable for tyre sizes max. 42".- It has an automatic shut-off when no air is needed. A simple pressure on the filling gun is sufficient to switch the compressor on again.- Delivery volume: at 0 bar 51 l/min, at 3 bar 34 l/min, at 5 bar 26 l/min and at 7 bar 21 litres per minute- max. air pressure: 10 bar- max. voltage: 13.8 volts- max. current consumption: 23 amps- max. ambient temperature for compressor operation: 70° Celsius- min. ambient temperature for compressor operation: -40° Celsius- Max. possible operating time e.g. at 22°C ambient temperature: 60 minutes at 7 bar, after which the compressor should pause for approx. 40 minutes, or 40 minutes at 10 bar, after which the compressor should pause for approx. 60 minutes.- Dimension: length 28cm / width 15cm / height 19cm- Weight: 5,9 Kg- Protection class: IP54Scope of delivery:- 9.5 metre air hose, spiral-shaped- 2.5 metre battery cable with battery terminals- Tyre inflator incl. pressure gauge- Aluminium stand or plate- Connection from stand to compressor by vibration-reducing silent blocks- Replaceable air filter- Battery cable with integrated fuse holder incl. 30 amp fuse- three additional valve adapters- a high-quality carrying bagAs a pioneer and market leader in the field of automotive compressors, VIAIR has set the highest quality standards that apply to all VIAIR compressor models and series. Here is a small excerpt of the most important features: - stainless steel valves guarantee long-lasting and optimum shut-off times - generously designed cooling fins on cylinders optimised for design ensure maximum air dissipation and longer service life - anodised cylinder running surfaces increase protection against abrasion - the piston motor with PTFE piston rings ensures the lowest friction and thus optimum smooth running and service life Features - the motors are protected against splash water and thus maximally resistant to corrosion - an integrated, automatic overheating protection protects the longevity of the compressors - CE marking.