Ähnliche Artikel

Mounting plate air inlet for CB antenna Land Rover Defender, for left-hand drive (LHD)

Mounting plate for CB antennas on Land Rover Defender, for left-hand drive (LHD) This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material

Product number: ALCB-FM

Weight: 2,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

From €69.00*

Select version

DV antenna cable 5m RG58 with PL foot incl. Weather protection cap and FME PL adapter - solderless

Brief description: DV antenna cable 5m RG58 with PL foot incl. Weather protection cap and FME PL adapter - solderless This article is perfect as a roof duct for an antenna cable to operate a CB radio system. The supplied cover cap protects the PL foot from the weather when an antenna is not in use. The detachable PL adapter makes it easy to lay the cable inside the vehicle or to carry it out in tight spaces. There is no longer any need for soldering work because this article is provided with a PL screw connection on both sides. This article is ideal if, for example, you want to use our Cargobear antenna holder on our Cargobear in the rear area and are looking for a clean solution for the cable duct in the interior right up to your CB radio.

Product number: ATEKA

Weight: 0,3 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€55.00*

CB-Radio VOX Microphone

The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.

Product number: NA42120

Weight: 0,6 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€37.00*

VOX microphone 4-pole plug Version 2.0

The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.

Product number: NA42130

Weight: 0,6 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€37.00*

Albrecht Racer 90 mobile antenna, 115 cm

This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.

Product number: NA67130

Weight: 2,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€57.90*

Alan Funk 90 CB antenna for fixed mounting, length approx. 90cm, 200W, 4m cable with DV connector

Radio 90 CB antenna for fixed mounting Technical data: Length approx. 90 cm 200 W 4 m cable with DV plug 1/4 lambda The antenna has an open-ended cable to make it easier to lay the cable. A PL259/6 plug for RG58 coaxial cable is required for connection to a radio.

Product number: NA63804

Weight: 3,5 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€76.00*

Alan ML145 magnetic antenna

Magnetic base antenna for CB radio, approx. 145 cm long. Technical data: Type: 5/8 LambdaPower rating: 200 WLength of steel: 148 cmRadiator material: stainless steelMagnetic base: 120 mm diameterThe antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.

Product number: NA6305

Weight: 3,0 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€73.90*

Alan radio 150 CB antenna for fixed mounting

The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.

Product number: NA63806

Weight: 3,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€88.00*

PL 259-6 plug, Alan PL259/6 plug, for RG58 coaxial cable

Alan PL259/6 connector, for RG58 coaxial cable

Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.

Product number: NA50120

Weight: 0,1 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€8.00*

CargoBear Bracket for CB Radio Antenna

Bracket for CB antenna / radio antenna for CargoBear system roof rack Stainless steel, black powder-coated.Delivery without antenna, price per piece.- Suitable for all CargoBear 1 + 2 roof racks!

Product number: CARGOBEAR-CBS

Weight: 0,2 kg
Parcel shipping

Available from stock - delivery time 1-3 working days

€22.00*

VOX microphone 6-pin

Name: VOX microphone 6-pin
Brand: Alan Electronics
SKU: NA42100
Price: 37.0 EUR
Availability: LimitedAvailability

€37.00*

Prices incl. VAT; plus shipping costs / Parcel shipping

↪️ VOX microphone ✔️ 6-pin ✔️ with ANC and 3,000 mAh battery ✔️ including USB charging cable ✔️ best quality ✔️ fast shipping

Available from stock - delivery time 1-3 working days

Piece

Product number: NA42100

Weight: 0.6 kg

Albrecht CB radio VOX microphones offer the perfect solution for hands-free communication in vehicles in accordance with Section 23 (1a) of the Road Traffic Act, which prohibits the use of microphones by hand in vehicles from July 1st, 2020.

These microphones can be used with almost all CB radios on the market. The integrated active noise cancellation function filters out disruptive background noise and offers very clear voice transmission. The integrated battery has an operating time of approx. 60 hours and can also be charged while the microphone is in use.

Properties:
► for hands-free communication in the vehicle (compliant with § 23 (1a) StVO, which prohibits the use of microphones by hand in vehicles from July 1st, 2020)
► Active Noise Cancellation filters out disturbing background noise
► VOX sensitivity adjustable in 4 levels
► VOX delay adjustable in 4 levels
► Impedance: 4.7K ohms
► Sensitivity: -58db
► Up / Down buttons
► integrated battery 3,000 mAh (rechargeable)
► Operating time: approx. 60 hours
► Can be used while charging
► Micro-USB charging socket on the microphone
► Connection: 6-pin CB radio plug

Documents

Kompatibilität

Bedienungsanleitung