POWERspec Toyota Hilux 2.4/2.8D, from MY 2015, clutch kit The POWERspec is the next stage up, ideal if you use your Hilux as a work horse. If you tow regularly or carry any extra weight like expedition trucks do then this is the spec for you. It’ll handle highly tuned road monsters or hard worked off-roaders all day long. If you want reliability and drivability from your mapped motor the POWERspec will keep you moving forward!     (Pedal Weight not noticeably Heavier than original) Description: Perfect for vehicles with a Stage2 map/ Heavy Towing/ Off-roading 1x LOF HD Drive plate, fitted with Woven organic 0.4μ high friction Coefficient 1x LOF HD POWERspec clutch cover, +40% Clamp load over original 1x LOF HD release bearing 6x Clutch cover bolts, coated in loctite 1x Hilux Pilot/ spigot bearing 1x Clutch alignment tool from LOF 10ml Spline assembly grease 2 year LOF Warranty

Nakatanenga winch bundle SX 10SR or SX 12SR for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch SX 10 SR or SX 12SR has a three-stage planetary gear. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling off the rope by hand. The Superwinch electric winch SX 10 SR or SX 12SR has waterproof sealed relays for high electrical currents, which allow a longer duty cycle. The rope drum has a patented lighting system. It is used for commercial recovery of rolling loads. The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Technical data of the Superwinch SX 10SR winch: Rope speed: 8.3 - 1.4 [m/min].Pulling force: 4.5 tVoltage: 12 VWeight: 61 kgPower consumption at full load: 363 AMovable control box Technical data of the Superwinch SX 12SR cable winch: Rope speed: 7.1 - 1.1 [m/min].Pulling force: 5.4 tVoltage: 12 VWeight: 31 kgPower consumption at full load: 379 AMovable control box The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity. Bundle consisting of: 1x Superwinch SX10 SR or SX 12SR cable winch - please select the appropriate variant1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - optionally in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL

Nakatanenga winch bundle Tigershark 9.5 or 11.5 for Land Rover Defender In the Nakatanenga winch bundle for the Land Rover Defender, you get everything you need for safe and reliable self or third-party recovery:The basis is the proven Nakatanenga NAWIBU2 winch bumper, which is equally suitable for Defender with or without air conditioning. The bumper, which is manufactured locally for us, is powder-coated black and reliably protects the front of the vehicle even during tough off-road use. The raised corners of the bumper improve the vehicle's slope angle. The two integrated, swivelling recovery eyes are ideal for self-recovery and recovery by others - or for hooking in the pulley, which is also supplied and doubles the pulling force of the winch or makes difficult recoveries possible in the first place. The design of the winch bumper allows for easy registration by means of a fee-based individual approval.There is the optional possibility of mounting two 70 mm spotlights recessed - so they are optimally protected against damage in the terrain. We use modern LED driving lights from Nolden, which provide excellent light with low power consumption (only 1.1 A per headlight). They have an E-mark and can therefore be used without registration. In order to harmonise with any existing Nolden Bi-LED main headlights, the auxiliary driving lamps are available in black or chrome-coloured optics. The 12 V Superwinch electric winch Tiger Shark 11500 / 9500  has a two-stage planetary gearbox. The winch is equipped with an automatic load holding brake with mechanical cone brake for large loads and a freewheel clutch for pulling the rope by hand. The Superwinch Tiger Shark 11.5 / 9.5 electric winch has waterproof sealed relays for high electrical currents, allowing longer duty cycles.It is used for commercial recovery of rolling loads. Technical data of the Tigershark 9.5 winch: Rope speed: 5.7 - 1.2 [m/min].Pulling force: 4.3 tVoltage: 12 VWeight: 41 kgPower consumption at full load: 340 A  Technical data of the Tigershark 11.5 winch: Rope speed: 5.7 - 0.6 [m/min].Pulling force: 5.2 tVoltage: 12 VWeight: 42 kgPower consumption at full load: 410 A The winches have a synthetic fibre rope made of high-strength fibre instead of the conventional steel rope. This is not only much lighter (and thus benefits the handling and efficiency of the vehicle), but also much safer to use. In the event of tearing, it does not become a dangerous projectile - rather, it simply falls to the ground. In fact, it is so light that it floats! It also drastically reduces the risk of injury from protruding strand ends. The flat Nakatanenga rope window again saves weight compared to conventional roller rope windows, is gentler on the rope and protrudes less.Depending on the vehicle version and winch type, it may be necessary to adapt the radiator grille.The winch bundle is rounded off by a useful accessory bag containing a high-strength tree anchor strap, two shackles, the above-mentioned pulley and a pair of Nakatanenga work gloves. Bundle consisting of: 1x cable winch Tigershark 9.5 or 11.5 - please select the appropriate version1x cable remote control1 x Nakatanenga winch window1 x plastic winch cable - either in orange or grey1 x accessory bag for plastic winch cable1 x winch bumper - optionally: without headlights, with 70mm Nolden spotlights black, with 70mm Nolden spotlights chrome1 x cable set for winch mounting1 x winch hook XL The cable winch bundle does not come with an ABE or expert opinion for the bumper. Registration as an "equipment carrier cable winch" is possible at numerous test centres without any problems by means of individual acceptance for which a charge is made. We recommend prior consultation with the local, authorised test engineer - or alternatively registration in our company. For this purpose, we require the vehicle with mounted bumper incl. cable winch on site. You can also mount the bumper yourself - we will then take care of the registration! We will charge you for the TÜV fees - according to our experience 100-150 EUR - as well as the working time of approx. 1 hour.Please also note our installation flat rate! If you add this to your shopping basket during the order process and send it off, we will contact you to arrange an appointment - please note that we have several weeks' lead time for workshop appointments!For the care of the plastic winch rope and to extend its service life, we recommend the appropriate   impregnation spray. For intensive and frequent use of the winch, we recommend the use of the Nakatanenga double battery system with 160Ah total capacity.

Ventilation panels rear side window Toyota Hilux Double Cab 2005-2015 Good air circulation as with slightly open windows and still no higher risk of rainwater penetration or theft than with closed windows? And protection from various insects? That's possible: with our ventilation panels with mosquito net, made of aluminium to exactly fit a wide range of off-roaders - no rattling universal parts that "somehow" hold! For a discreet appearance, the aluminium panels, which are supplied in pairs, are powder-coated black. Ideal not only for campers and dog owners, but also to prevent heat build-up when parking in the blazing sun. And it's super easy to install: roll down the window, insert the ventilation plate, roll up the window, done! Please note: In high temperatures, children or animals do not belong in a parked car, even with sufficient fresh air! Length: 685 mm <iframe width="560" height="315" src="https://www.youtube.com/embed/qWKDhVh_0n0" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Nakatanenga Soft Shackle 10 mm – Breaking Strength 12,000 kg In principle, soft shackles are incredibly low tech: They are simple rope loops with a stopper knot and a fixed noose. The shackle is held together and tightened by the very load it is meant to hold and is easily opened or fastened. Maybe it is the very simplicity of the concept that accounts for some users’ skepticism and lets them stick to steel shackles even when using synthetic rope. But a rope shackle’s advantages are huge: there is hardly any risks for injury, very little weight, no tools necessary, no corrosion, no scratching or denting of vehicle or equipment parts und no bending or jamming under load.  As with all synthetic ropes, extra caution should be taken to avoid friction damage, fraying, heat and contact with chemicals. The rope shackles are available in grey and orange. Color: Grey, OrangeDiameter: 10 mmBreak strength: 12,000 kgRope elongation: 4,8%

Winch hook XL white / XXL white Often little attention is paid to an important detail on the winch: the hook. It is of crucial importance for the transmission of power between the winch and the anchorage point and must also be able to be operated safely in stressful situations. We offer two models from the industrial sector that shine with convincing detailed solutions: large radius of the hook so that even double straps can be securely hooked in twice large opening of the hook, it can be placed around most towbars stable cast iron snap (not made of thin sheet metal) that closes securely can be dismantled, thus simple assembly / disassembly of the rope without splicing, e.g. easy cleaning of the plastic rope possible large radius of the rope holder, so ropes with a large diameter and / or rope thimble can be used  Actual weight (XL): 0.750 kg Actual weight (XXL): 1.445 kg While the smaller model XL is designed for winches up to 10,000 lbs traction, the XXL models can be equipped with winches up to 18,000 lbs traction. The minimum breaking load is 18.000 kg or 32.600 kg. The hooks are made of alloyed, tempered steel, grade 8 and are painted. They are suitable for steel and plastic ropes with or without a thimble, the ropes can be installed without splicing. Please select the model. Please note: The delivered color may differ from the pictures.

For safety reasons, it is advisable to switch off the electric winch on the off-roader and only switch it on when needed. This is usually done with a disconnect switch in the engine compartment, so that awkward handling is necessary when you want to start the winch. With the switching relay and the switch supplied, this can be done conveniently from the driver's seat without having to lay the winch's power cables there. Only two thin wires are needed, the required switch is included in the delivery, the switching relay is mounted in the engine compartment. It has an additional switch directly on the relay housing and does not consume any power when it is not being switched. A recessed labelling field allows easy identification of the relay. The switch is a very high quality Carlingtech Contura switch (waterproof to IP67 standard), this fits seamlessly into our mounting frames or various consoles such as in the Land Rover Defender TD4 or other vehicles. The relay is designed for a continuous load of 500 A, please check if this is suitable for your winch. According to the manufacturer, a Warn 9.5XP requires 425 A, a Tabor 12K 457 A and the Warn 8274-50 450 A. Technical data:Maximum load capacity (continuous): 500 AMaximum load capacity (5 minutes): 700 AMaximum load capacity (1 minute): 1,100 AMaximum load capacity (10 seconds): 2,500 AVoltage: 10.1-16.5 VCurrent consumption in idle position: 0 mACurrent consumption during switching: less than 7 AConnections: 2x M10 screw boltsDimensions relay: 96x139x52 mmSwitch dimensions: 36x21 mm mounting holeSwitching capacity of the switch: max. 20 A

Winch hook with a max load of 2000kg for use with 7-8mm cable and a loop. The hook is made from high-quality steel and is made in the EU. Thanks to the generous design the hook is very easy to use.