This set consists of 4 GripTape patches suitable for all surfaces (bumper, roof, sidebars, etc.)  measurements: 270x50 mm adhesive bottom extra-strong  weather resistant  The strips are precision laser cut in-house.  Special sizes are also possible on request. Please contact us for this simply by email or telephone.  

CargoBear rear ladder for Mercedes G Even the best roof rack isn’t worth much, when you can’t access it quickly and safely – especially when we’re talking very tall 4x4s like the Mercedes G-Class. Depending on your vehicle specs and the roof rack, you may face a climb of well over two 2 meters with the G-wagon. This light but extremely sturdy aluminum ladder with its four steps features an angled design following the contours of the G-Class’ rear. The bottom of the ladder is wider than the top, making especially the descents much safer. A matte black powder-coated finish is as elegant as it is robust, even when you get a lot of use out of it. Our rear ladder for the G-Class fits the following models:• W460 (MY 79-92)• W461 (from MY 92)• W462 (ELBO version)• W463 (MY 1990 - 2018) The ladder is hooked into the rain gutter at the top and screwed in place; the following mounting options are available for the lower section:Standard mounting:Fastening with 3M double-sided adhesive tape.Optional mounting:Drill 2 holes and screw on with the two blind insert nuts.Installation for the G Professional:Screw the assembly to the existing screw points on the vehicle.

Product information Ladder can be used as a spare part for our ROOFLODGE EVOLUTION folding tents. Rung width: 30 cmLadder dimensions: retracted 1.2 m / extended 2.15 m Here you will find a matching ladder extension - for up to a further 45 cm. Please note that for older Roof Lodge Evolution folding tent models, the ladder bracket must be remounted on the base plate of the roof tent.

Rear Ladder for Land Rover Defender The rear ladder is suitable for Land Rover Defender 90/110 and allows easy access to the roof rack. The rear ladder is powder coated black and has a perfect cut-out for the rear number plate.

Convenient side-step for Landrover Defender, foldableYou can find a suitable crossbar here.

Access to the roof of a car is usually something for climbing professionals - especially from the side. This applies to expedition-ready 4x4s with CargoBear-style system carriers that can be climbed by ladder, and especially to SUVs with ski racks or family vans with roof boxes. Often the vehicles are simply too high or the drivers too small or unathletic to get safe and easy side access to the roof load. They try to find a foothold on the seats by groping with their feet while holding on tightly with one hand to avoid tipping over backwards. Or you climb onto boxes or makeshift ladders and let the passenger support you, but who always has ladders or a passenger with them? What fits into the car in any case is our convenient and safe climbing aid for hanging into the body-side locking brackets of the door locks. The ladder replacement is hooked into the catch eye of the latch with a simple, fold-out hook. The pressure of the rubberised rear edge of the step surface on the B- or C-pillar results in an absolutely safe climbing aid under load that does not wobble or slip. This way, you can reach every side of the car roof safely and quickly without much effort. The locking brackets of the car doors have to withstand forces that are many times the weight of the human body so that the door does not open in the event of an accident or attempted break-in. The ladder itself is made of an extremely solid aluminium alloy and is designed to withstand 200 kg. This means that even large and heavy contemporaries need not worry. However, the first use should be carried out with caution and care in order to get the necessary safety when climbing. The step is covered with non-slip, grooved PVC and to ensure that the paintwork is not damaged, there is an additional rubber protector that can be attached to the edge of the step. By the way, if there is no more room for the foldable door step in the glove compartment or the centre shelf, you can leave the emergency hammer at home, because it has a steel tip at the front and thus also functions as a rescue tool for breaking windows. ATTENTION: not suitable for Land Rover Defender up to MY2016

Rear step for Land Rover Defender, foldable, 1 pieceYou can find a suitable crossbar here.

Rear ladder for Suzuki Jimny 2 type GJ BJ 2018 / HJ Boxier, tougher and even more capable, that’s the Suzuki Jimny 2 (GJ/HJ MY 2019). Even if cargo space has grown considerably in comparison with the previous model, optimizing your usable load capacity is still crucial if you want to get the most out of this little giant. Considering the limited interior that means first and foremost to use the roof space to the full extent: either with our own dedicated CargoBear system for the Jimny or any other conventional roof rails, bars or racks. Whatever solution you prefer, our light and strong aluminum ladder makes accessing the roof area a lot easier. Climbing to the rooftop is safer, more comfortable and allows for stress-free loading, fastening or strapping down of your cargo. The ladder is mounted on the tailgate only and has no connection with the roof or the rack, making it ideal for all kinds of carrier systems. Additionally, there is no need to drill holes either as the ladder is custom-designed to fit existing mounting points and screw holes: on the spare wheel mount, the tailgate’s drip rail and the bottom right door hinge. This also allows for quick and easy de-installation without damage or marks. The ladder is made from high-quality aluminum and features black powder coating – a perfect match for our modular CargoBear roof rack system.

Suitable for Roof Lodge roof tents with pull-out ladder from year of construction 2019 Rung width: 30 cm Please note:We have two different ladder extensions. On the basis of the black cap you can check which is the appropriate extension. Please check the pictures and compare with your ladder. If this ladder extension does not fit, you will find the suitable extension here.

Finally arrived at the perfect place to make yourself comfortable in the roof tent. And who does not know that: the ladder wobbles because the ground is uneven or even the ladder slips away. This is extremely annoying. The solution is so easy for us.With these leveling feet for roof tent ladders you can adapt to any local conditions. Due to the rubberized surface even a smooth surface is no longer an obstacle. Uneven ground or if you are in the slope, that's no longer a problem. You have a secure grip on asphalt and beyond the paved road. Instructions: Please follow the steps in the pictures (see gallery pictures from step 1 to step 6). Consisting of:2 pieces knurled screw2 pieces of joint feet2 pieces mounting bracket1 piece of storage bag