Sun visor organiser - Made in Germany   Want more storage space and organisation in the interior? The Nakatanenga sun visor organiser is hard to beat in this respect. With this organiser, you can keep all your small items lying around in the vehicle within easy reach, e.g. parking passes and discs, vehicle documents, fuel or other cards, glasses, writing materials, small tools such as multitools or seatbelt cutters and much more.   The universal organiser made of robust and easy-to-clean nylon is 290 mm wide, fits in almost all vehicles and has a zip pocket and MOLLE loops. It is attached using Velcro straps.    The organiser becomes even more versatile with the separately available card holder for all parking, fuel, membership or bank cards or the mirror for insertion into the MOLLE loops.   The Nakatanenga sun visor organiser is available in the following colours: - black - grey

Waterproof transport boxes in standard and plus version With this transport box, you are equipped for any adventure. Whether you want to safely store your tools, spare parts, barbecue equipment or firewood, it offers the necessary space and optimum protection. From dusty Balkan expeditions to damp England tours, this box will be your faithful companion.  Virtually indestructible, this box made of 3.6 mm thick polyethylene defies the adversities of life. Unlike aluminum boxes, you can't dent it so easily. In addition, the UV-8 stabilizers in the polyethylene material ensure that the box does not become porous even in strong sunlight. Note: Identical sizes can be stacked on each other. These versions are available:      Version    Volume    External dimensions    Weight  TBW-50   50 Litre  630x390x350 mm   7.00 kg TBW-70  70 Litre 700x450x350 mm 8.40 kg TBW-150  150 Litre 880x560x440 mm 13.40 kg TBW-220  220 Litre 1070x630x492 mm 15.70 kg           And a special note on superficial blemishes: Although we take the greatest possible care when storing and shipping all our products, plastic transport boxes made of polyethylene may occasionally show minimal surface scratches. These blemishes are due to the material and will occur later in daily use anyway. We therefore ask you to refrain from making complaints about minor cosmetic damage. After all, transport boxes are robust everyday objects that develop a certain patina over time. Every trace of use tells a story. So, have fun with it!      

Universal handle - Provides support where support is lacking - sizes M and L This handle is a great solution where support is lacking. The attachment is simple, ingenious and stable. The holder can be attached with rivets or screws wherever an additional or new handle is required. Areas of application can be, for example: inner car door, as an entry aid on the vehicle, on airline rails, on crates, on the Cargobear and on other roof racks as well as a replacement or supplement for all carrying systems. The handle can also be used for your interior fittings, e.g. for flaps and drawers.   Due to the flexible material, the handle is very space-saving and prevents the often painful ‘getting caught’.   Material: 100% nylon with PE reinforcements Dimensions size M: Total length: 18 cm Width: 5 cm Distance between the mounting holes: 13 cm Recommended mounting hole spacing: approx. 12 cm Size L dimensions: Overall length: 23,5 cm Width: 5 cm Distance between the mounting holes: 18,5 cm Recommended mounting hole spacing: 16,5 cm Available in: black and grey Set of 1 and 4 Mounting material is NOT included in the scope of delivery!  Please note:  The item supplied may differ slightly from the photo shown.     

Bamboo wood lids with and without metal feetRobust, weather-resistant and easy-to-clean bamboo wood lids transform the 25, 48 and 90 litre Transformer folding crates into practical tables for mobile use, camping, the workshop or any other place where the Transformer Crates are used.   There are also new table legs made of high-quality stainless steel. They are stable, rustproof and perfectly designed for durability. They also take up little space in the Transformer folding crate when folded. Thanks to the special holder, the legs are securely locked when folded and remain in place, no matter where the journey takes you.    This space-saving feature allows for efficient storage without losing valuable space. This versatility allows the tables to be used in a wide variety of spaces and for different purposes.   The stainless steel construction also allows for the maximum height of the legs, which can be stored diagonally in the box. As stainless steel remains rust-free even without a coating, it retains its timeless design for many years.  Lid dimensions: for 25L: L39.5 x W29.5 x H1.5cm for 48L: L54.0 x W36.0 x H1.5cm - including feet H 34.0cm for 90L: L73.0 x W42.0 x H1.5cm - including feet H 57.5cm The metal feet are already fitted by us in the value bundle. Metal feet in a set of 4, including template and matching screws, are available HERE in the store!   The Transformer folding boxes from Outstandards are available in the colours:   25 litre capacity: Ivory or Grey 48 litre volume: Ivory, black or olive 90 litre volume: black or olive Additional accessories can be ordered separately:       Hand trolley: for 48 litre box     Rubber straps: for 48 litre box, 90 litre box

Waterproof transport boxes in standard and plus version When it comes to transport boxes for off-roading, expeditions or work, it doesn’t always have to be aluminum. Heavy duty plastic boxes made from top quality polyethylene come with several advantages: they do not dent or warp, are waterproof, easy to clean and stackable. Due to their use as off-roading and expedition equipment, the boxes material has been specifically selected to withstand extreme physical stress, impacts and even degradation by UV radiation.- The basic version in gray - available in 50, 70, 150 or 220 liter volumes - has a sturdy hinged lid and heavy-duty hinges to prevent accidental opening. The solid metal latches at the front can be locked and lashing points ensure safe transportation. Fold-in side handles guarantee easy carrying. The XXL box with 220-L also features integrated castor wheels. - The Plus version is even better in terms of form and function. The Plus transport boxes in colors Gray or Sand are available in sizes 50, 90 and 160 liters and offer a whole range of extremely practical and helpful features: carrying straps with hard rubber handles replace the usual metal handles, making even very heavy boxes easier to carry. The flexible (and removable) strap handles do not protrude and save space in tight quarters. As with the basic version, the biggest box in the Plus range (160 L) features integrated castor wheels.Beveled lid edges and anti-slip coating improve load security and holes in the corners are designed for padlocks or similar locking techniques. The watertight Plus versions with their rustproof hinges and latches are also ideal for water activities, as ice boxes or even stationary water tanks, as they have a screw-on drain at the bottom on the side. This plug incidentally also serves as an ambient air pressure valve. And if you want to cool your drinks in the box on crushed ice, you'll definitely appreciate the built-in bottle opener - or the automatic interior LED light, just like inside your refrigerator at home. Note: Identical sizes can be stacked on each other. available in sizes: 50L 90L 110L 160L Color: Basalt gray RAL7012 Sand colors        Model     Volume     External dimensions    Weight TBW-50-PLUS       50 Liter               approx 63x36,5x33,2 cm 7,30 kg TBW-90-PLUS  90 Liter approx 76x43,5x39,70 cm 11,80 kg TBW-110-PLUS  110 Liter approx 118x44,5x30 cm 16,40 kg TBW-160-PLUS 160 Liter approx 95x55x46,5  18,70 kg             And a special note on superficial blemishes: Although we take the greatest possible care when storing and shipping all our products, plastic transport boxes made of polyethylene may occasionally show minimal surface scratches. These blemishes are due to the material and will occur later in daily use anyway. We therefore ask you to refrain from making complaints about minor cosmetic damage. After all, transport boxes are robust everyday objects that develop a certain patina over time. Every trace of use tells a story. So, have fun with it!  

Accessories Dashboard Mounting Point for New Defender L663 Practical mounts for cell phones, navigation devices, tablets, and other gadgets are indispensable, because even the latest cars with all their "connectivity" don't deliver everything an off-roader, overland explorer or ambitious camper requires. However, cheap plastic mounts are usually a waste of money and not everyone wants to stick suction cups to their windows either. Our mounting plates for the side handles on the dashboard of the New Defender are designed to support heavy duty mounts – like those from market leader RAM Mounts. The plate’s tight hold makes sure that nothing wobbles, collapses or falls off. But most of all, there are no suction cups involved as they tend to come loose when off-roading or speeding along bumpy dirt roads.The mounting plate is powder-coated black to match the interior of the new Landy and you simply fasten it with the existing screws of the handle. No drilling is required and removal is as easy as installation. Three strong, internally threaded 6 mm screw holes (M6) allow you to mount ball joints, brackets and other mounting equipment, either from RAM Mounts or other brands. In our bundle solution, the mounting plate comes with a 1-inch ball (type B) from RAM Mounts. Available with or without RAM Mount ball.  

Set of 2 FIXPLUS straps in 15cm or 23cm Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious. Can be used on many sides: camping (securing), car (fastening), sports (lashing, bundling), DIY & garden easy one-handed operation: super-simple quick release fastener, no snapping back, no scratching secure: guarantees a stable hold even with strong vibration & knocks, even after frequent use, tear-resistant, elastic and flexible durable: heat & cold-resistant (-30°/+60°C), seawater-resistant, UV-resistant Set of 2 FIXPLUS Strap 15: in the colours black or orange 15cm long 1.25cm wide 5g light Circumference up to 10.5cm Tensile force: 650N / 65kg Can be joined together and therefore extended Set of 2 FIXPLUS Strap 23: in the colours black or orange 15cm long 1.25cm wide 7,5g light Circumference up to 20cm Tensile force: 650N / 65kg Can be joined together and therefore extended

FIXPLUS brackets - incl. FIXPLUS strap in various lengths Get a grip! This versatile carrying aid is just the thing for you. The combination of a sturdy polyester loop with a comfortable, secure nylon handle and a Fixplus strap is the perfect replacement for cumbersome solutions such as cable ties, cords or ratchet straps.Large and unwieldy objects like heavy hoses, ropes, cables, ladders as well as camping equipment, car accessories, sports equipment and much more are quickly and securely lashed with the Fixplus strap - even with one hand. The Nylon handle allows for comfortable carrying. The components are designed for tensile strength up to 900N/90kg and all materials have been selected to withstand maximum stress and guarantee lasting durability. The flexible Fixplus strap is resistant to UV, heat, cold and seawater.Available with Fixplus strap in lengths of 46 or 66 cm.

FIXPLUS Strap 86cm long, in the colours black or orange Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious.     Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening     Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching     secure: guarantees a stable hold even with strong vibration & impacts, even after frequent use, tear-resistant, elastic and flexible     durable: heat and cold resistant (-30°/+60°C), seawater resistant, UV-resistant FIXPLUS Strap 86:         in the colours black or orange         86cm long         2.3cm wide         50g light         circumference up to 81cm         Pulling force: 900N / 90kg         Can be assembled and therefore extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach items of equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.

FIXPLUS Strap 66cm long, various colours Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious.     Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening     Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching     secure: guarantees a stable hold even with strong vibration & impacts, even after frequent use, tear-resistant, elastic and flexible     durable: heat and cold resistant (-30°/+60°C), seawater resistant, UV-resistant FIXPLUS Strap 66:         in the colours black or orange         66cm long         2.3cm wide         38g light         circumference up to 61cm         Pulling force: 900N / 90kg         Can be assembled and thus extended

FIXPLUS Strap 46cm long, various colours Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous spring-back and, above all, is reusable. Simple! Ingenious. Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & gardening Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching Secure: guarantees stable hold even with strong vibration & knocks even after frequent use, tear-resistant, elastic and flexible Durable: heat & cold. resistant (-30°/+60°C), seawater-resistant, UV-resistant FIXPLUS Strap 35: available in different colours 46cm long 2.3cm wide 27g light circumference up to 40cm tensile force: 900N / 90kg can be assembled and thus extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.

FIXPLUS Strap 35cm long, dark grey or orange Securing, bundling, fastening - it has never been easier because you were either looking for a suitable cable tie or an elastic tensioning strap. Our strap combines the advantages of both systems - without their disadvantages. Because it can be used with one hand, is as flexible as an elasticated tensioning strap but without the treacherous snap-back and, above all, is reusable. Simple! Ingenious. Versatile use: camping (securing), car (fastening), sports (lashing, bundling), DIY & garden  Easy one-handed operation: super-simple quick-release fastener, no snapping back, no scratching  Secure: guarantees a stable hold even with strong vibration & knocks even after frequent use, tear-resistant, elastic and flexible  Durable: heat & cold-resistant (-30°/+60°C), seawater-resistant, UV-resistant FIXPLUS Strap 35:  in the colours dark grey or orange  35cm long - 2.3cm wide - 22g light  circumference up to 30.5cm  tensile force: 900N / 90kg  can be assembled and thus extended Whether you use it to secure cargo or bicycles on your car or luggage on your bike, attach equipment, fix ladders to railings or branches, bundle hoses, cables or poles, connect skis or poles to each other - this ingenious strap has almost unlimited applications.

Ratchet system It can be easily operated with one finger and can hold objects from 12 mm to 203 mm Ø. The maximum load capacity per holder is 30 kg. This makes the system ideal for tools, bottles, fire extinguishers and much more. Technical data: Working range: -20 °C to +80 °C Tested in accordance with AfPS GS 2014:01 PAH: suitable for long-term skin contact Mounting surface: 170 x 100 mm Simple installation with 10 mm screws Max. Load capacity: 30 kg  

Molle panel for the two rear door windows inside / Ineos Grenadier - damage-free installation without drilling The aluminium window panels are simply attached to the inside of the windows using suction cups and are compatible with all Molle products in our range. The possibilities for combination and personalization are therefore virtually endless: whether you want to stow several MOLLE bags, the first aid kit or something else neatly with our tensioning and fastening straps, these modular panels make it possible. FixPlus Straps are also a good addition. And if you don't need the panels at the moment or if you sell the trolley, you can dismantle them without leaving a trace. Material: ALUMINIUM, black powder-coated Scope of delivery: 2 vehicle panels, incl. fastening material (suction cups)

Clamp lock or also called lashing strap with clamp lock are ideal for securing loads in cars, trailers, vans or lorries. Quick and easy to use, they can be used to bundle wood, secure boxes on a pallet and much more. Scope of delivery: 1 piece 25mm wide 2m long for 400kg tensile force

Roof console for Suzuki Jimny 2, type GJ On our passionate mission to optimize the storage space in the Suzuki Jimny II in the best possible way, we have set our sights on one of the last remaining spaces in the interior. Having covered the rear area well with the CargoBear shelf, cargo net, tailgate organizer, seat covers and modular window panels, we are left with an empty piece of headliner between the driver and front passenger that is crying out for a storage upgrade. Our roof console made of 2 mm thick aluminum is approx. 73 cm long and 18 cm wide, making it ideal for strapping or screwing on flat and/or long items of equipment, MOLLE bags and the like. Mounting the bracket is extremely simple, regardless of whether a cargo net is already installed or not. In the former case, the retaining plate of the console is attached directly to the strip of the cargo net. If the headlining is still bare, there are two plugged mounting points at the corresponding points at the factory which are used. At the front, the interior light must be removed briefly in order to make two small holes in the trim for the screws. Once the screws have been secured with the nuts, the interior lighting can be refitted.  The roof console for the Jimny 2 is available in black, coyote or gray to match the roof net versions.    

Tool Roll - modular tool bag The principle of Tool Roll is as ingenious as it is old: roll out instead of junk. The square fits into the round, remains always at the intended place and therefore takes less space altogether. Can you still improve that? We say yes. The newly developed, modular Nakatanenga Tool Roll owes its added value to our experience as an off-roader, screwdriver and also as a fan of tactical equipment. Large Velcro surfaces on the baseplate make our tool roll freely populated and extremely flexible. Depending on the size of the baseplate, it is possible to attach a maximum of eight separately available tool bags in four rows. A bag of size M correspond exactly to two of the size S. Through this modular system you take then only the tool sets, which are really needed. And we also thought about it: Loose bits and pieces find their place in the sewn-in mesh pockets. The Tool Roll rolls up clean even with maximum placement and is quickly closed or opened with two clip closures. Carrying handle and shoulder strap mean easy transportation. When deployed, the Toll Roll on the D-rings (two or three depending on size) is hung on the wall, on the vehicle or on the tree in the field. Robust, high quality nylon is our material of choice. With the choice of different sizes and combinable bags you will find as a mechanic, handyman, biker and cyclist guaranteed your own, optimal NakatanengaTool Roll combination. Material bag / base plate: 100% nylon (buckles: Duralfex / ITW / Dekal) Dimensions:Magnetic plate: 10x10 cmWorking document Gr. S: 80x45 cmWorking document Gr. M: 80x24 cm MADE IN EUROPE

Multifunctional, waterproof LWAC transport box / ammobox from PPD The waterproof and impact-resistant Ammo boxes (Light Weight Ammunition Cases - LWAC boxes) are made of sturdy polyethylene and have a wall thickness of 3.6 mm. The boxes were built e.g. for outdoor use, and thanks to extra-strong closures, they remain closed even on turbulent rides through rough terrain. Anyone who often travels in sunny areas will also be pleased that the transport box does not become porous due to the UV light of the sun - thanks to long-term UV-8 stabilizers. And to address the offroad issue, additional stress cracking (ASTM D638, D790B & ISO527 / 1A / 50) and pressure (ASTM D1693 and 1693A) testing procedures were performed. Technical specifications: the LWAC box is classified as "CLASS J" according to DEF-STAN 81-41 and as "NATO Packaging Level - 1" according to STANAG 4280 low noise emission during handling and contact with steel surfaces robust and stable versatile (everything that needs to stay dry and clean, tools, catering, electronics, pyrotechnics, explosives, flares and much more) weight: 765 g dimensions: 305 x 155 x 190 mm Colour: black, red, sand Weight: 765 g Dimensions: 305 x 155 x 190 mm Inner dimensions: 277 x 143 x 173 mm Color: black, red, yellow, green, blue, sand Available: single, set of 3, set of 10 Nakatanenga has the distribution for these LWAC transport boxes for the civilian market. You are welcome to request larger quantities from us at info@nakatanenga.de or by phone at +49 (0) 9181 466 644

Side Box for Land Rover New Defender from BJ 2020 With off-road vehicles like the New Defender, exterior cargo space is a great idea. After all, there are many pieces of gear and equipment that need to be quickly accessible but shouldn’t be kept on the inside, because they are either too filthy or they smell of gas, Diesel or other automotive chemicals. A perfect storage place for these things is our side-mounted storage box for the New Landy’s right side.* The side-mounted storage box is made from Plastic and offers a hefty 24 l of volume. It is mounted on the standard roof rail or on our CargoBear roof rack – adapters are included. Its size and the maximum load of 17 kg allow for a huge amount of equipment that can be stored here. Inside the box, there’s a built-in storage mesh for more safety and tidiness. The carrier can be locked and is also watertight, of course. For easier cleaning, there is a plughole with a rubber stopper in the bottom. The side-mounted cargo carrier is designed for maximum aerodynamics and the reduction of wind noise. Its color black compliments every New Defender and if you want to take customization even further, depressions on the lid are the perfect spot to attach one of our Land Rover logos. Please note:*The side-mounted carrier box can only be installed on the right and not together with the ladder. If you want both, the ladder must be mounted on the left side.The mounting screws should be regularly lubricated. Storage volume:24 lMaximum load:17 kg

Storage compartment footwell for Land Rover Defender TD4/TD5 Every Landy draws attention, for sure, but often enough it’s the unwanted kind from thieves and car burglars. That’s where this nifty and inconspicuous modification comes in for Defender models Td5 and Td4 (90/110/130) – whether camping conversion, expedition vehicle or your regular standard spec Landy. Our hidden underfloor locker for the front footwell is integrated in the floor panel and thereby creates a lot more security for your valuables. Secured by a lock, dust- and watertight and in most cases hidden by floor mats, the underfloor boxes are the ideal storage space for all those extremely important small things: documents, passports, wallets, expensive electronics, gadgets, tools, medication etc. Sporting a volume of ca. 7 liters, this roughly square storage box will hold an astounding amount of your most valuable items. Since the boxes are mounted underneath the footwell floor, we make them from extremely robust, powder-coated stainless steel. Installing the assembly kits for Td5/Td4 in the right or left front seat footwells is really simple. Other areas in the vehicle body are also suitable for mounting the locker, the cargo hold for example. In these cases, you can order the box also without the panel. If you own non-standard Defenders or older models, where the Td5/Td4 panels won’t fit, you should also choose the “locker only” option. The same applies if you simply want to make the cuts yourself in the existing floor panels. Important during installation: the flattened edge of the box must always face the centre of the vehicle during installation! Please note, if a tank or other additional attachments are mounted below the bottom plate, it is not possible to mount the storage box. Material: Box: Stainless steelFootwell panel: Aluminum

Tailgate Organizer - Rear door storage system for the New Defender from 2020 onwards. Where to put all the bits and bobs in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organizer makes use of the mostly unused space on the tailgate. In several pockets with MOLLE fastening system (abbreviation for MOdular Lightweight Load-carrying Equipment) all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Tailgate Organizer Hardbase compared to textile MOLLE: quicker to attach and detach, e.g. first aid bag more stable than textile MOLLE can also be used in combination with QuickFist for tools or ropes. Free access to the warning triangle compartment Rear door compartment is enlarged by the organiser Please note before mounting: The hardbase is asymmetrical, the wider side next to the recess must be on the right side.  The sets are composed as follows: SET1:1x MOLLE multi-purpose bag, open1x MOLLE multi-purpose bag, large1x MOLLE universal bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base SET2:1x MOLLE multi-purpose bag, open2x MOLLE multi-purpose bag, large1x stainless steel fastening material1x MOLLE Tailgate Organizer base plate hardbase made of aluminiumoptional: 1x MOLLE first aid bag with Tear-Off-Base Bag Material: 100% nylon PU coated And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticisers. Until recently, low-molecular phthalates were the most common plasticisers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered to be a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to use only ecologically and health-safe alternatives such as nylon PU for the coating of textile products.

Tailgate Organizer - tailgate organiser system for various vehicles. Where to put all those little things in the touring vehicle? First-aid kits, multimeters, work gloves, winch controls, tyre repair kit etc.? - all that needs to be stowed away. The Tailgate Organiser makes use of the mostly unused space on the tailgate. In several pockets with MOLLE attachment system (abbreviation for MOdular Lightweight Load-carrying Equipment), all kinds of small items can be stowed and are at hand when they are needed. The advantages of MOLLE Laser-Cut compared to MOLLE with stitching: lighter in comparison, as much less sewing material is used quicker to attach and detach e.g. first aid bag flatter than sewn MOLLE  prevents unintentional snagging optimum hold and no slipping What is Molle? Information can be found in the downloads. The sets are made up as follows: Land Rover Defender:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Suzuki Jimny until year of construction 2018:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Suzuki Jimny 2:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    1x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Jeep Wrangler JK:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE first aid bag with Velcro base plate Mercedes G until year of construction 2018:     1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate    optional: 1x MOLLE First Aid Bag with Velcro base plate Universal 650x250 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organiser base plate 650x250 mm    optional: 1x MOLLE first aid bag with Velcro base plate Universal 740x350 mm:    1x MOLLE multi-purpose bag    1x MOLLE multi-purpose bag, open    2x MOLLE multi-purpose bag, large    1x MOLLE universal bag, large    1x stainless steel fastening material    1x MOLLE Tailgate Organizer base plate 740x350 mm    optional: 1x MOLLE first aid bag with Velcro base plate Material: 100% nylon And by the way: At Nakatanenga we only use materials with 100% nylon PU coating for all textile articles. Unlike PVC, nylon PU (polyurethane) is free of harmful phthalate-based plasticizers. Until recently, low-molecular phthalates were the most common plasticizers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are suspected of acting like endogenous hormones due to their molecular nature. This is highly questionable from a toxicological point of view and is considered a trigger for various diseases, including cancer. For Nakatanenga, it is therefore a matter of course to rely exclusively on ecologically and health-safe alternatives such as nylon PU when coating textile products.Fastening: For mounting, the cover must be removed, for this our dismantling tool is perfectly suitable, then holes must be drilled, cover put back on and then only screwed on.To ensure the best possible availability of this product, the choice of bags supplied may vary in exceptional cases. If a single bag is not available, it will be replaced by a model of at least the same quality. Tailgate Organizer custom made:     We are also happy to produce our Tailgate Organizer in custom designs. Available on request in coyote, grey and orange with laser cut MOLLE panels. Should you require a different design, please inquire via the contact form.

MOLLE System Bag Set Are you looking for a packing option that will finally allow you to organise your belongings? With the new Molle bag set you are prepared for any eventuality. You can attach the Molle bags to various carriers, organisers, panels or backpacks with the Molle system - examples are our Molle carriers for car seats and our Tailgate organisers for Defender, Mercedes G, Jeep Wrangler, Suzuki Jimny or our universally usable Tailgate organisers. The innovative MOLLE system (short for MOdular Lightweight Load-carrying Equipment) makes it easy to attach the bags and ensures that they are held firmly in place.What is Molle? Information can be found in the downloads.The following MOLLE pouches are included:     1 multi-purpose pouch     1 multi-purpose pouch, open     1 multi-purpose pouch, large     1 universal bag, large     1 first aid bag (optional - please select above at "Variant") Material: 100% nylonDimensions WxH:     Multi-purpose bag, large: approx. 24x15 cm     Unversaltasche large: approx. 21x22 cm     multi-purpose bag open: approx. 12x19 cm     multi-purpose bag: approx. 20x13 cm Please note: the pictured tailgate organiser (molle panel) is NOT included in the set!<iframe width="560" height="315" src="https://www.youtube.com/embed/K3uIwrFH1Yk" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Are you looking for a pack that allows you to organize your stuff? With these Molle bags you are ready for any event, you can attach the Molle bags to various straps, organizers, panels or backpacks with Molle system - examples are our Mole carrier for car seats and our Tailgate Organizer for Defender, Mercedes G, Jeep Wrangler , Suzuki Jimny or our universal Tailgate Organizer. The innovative MOLLE system (short for MOdular Lightweight Load-carrying Equipment) allows easy attachment of the bags and ensures their firm hold. Material: 100% nylon And by the way: At Nakatanenga, we only use materials with 100% nylon PU coating for all textile articles. Nylon PU (polyurethanes) is, unlike PVC, free from harmful phthalate-based plasticizers. Low molecular weight phthalates were until recently the most common plasticizers for plastics of all kinds and are even used in food and cosmetics. However, they accumulate in the environment and are due to their molecular nature suspected of acting as the body's own hormones. This is toxicologically highly questionable and is considered the trigger for various diseases, including cancer. For Nakatanenga, it goes without saying that when it comes to coating textile products, it is only possible to use environmentally friendly and harmless alternatives such as nylon PU.

Subdivision system / protective foam for aluminium box  Nothing beats aluminum boxes, especially the ones by Danish outfitter Alubox.com, when it comes to transporting or storing gear and equipment. They are light, sturdy and resistant to corrosion, chemicals and many other environmental influences. How can you improve an aluminum box? By adding an interior structure for more organization and safety. That’s why Alubox.com have come up with their RuumX solution, a customizable system of padded layers walls, dividers and protective “egg crate” foam.  Whether it’s dishes, tools or electronic equipment, the protective divider system makes transport and storage in aluminum boxes significantly safer and more organized. RuumX also allows for very specific customization. The set consists of two self-adhesive foam-pads for the bottom and the inside of the lid, two perfectly fitting side wall elements with rounded corners as well as five dividers, which can be cut to the desired lengths. All walls and dividers are made from corrugated plastic panels with foam layers on both sides. These sandwich panels are lightweight yet extremely robust. The cells or slots in the panels are also used to firmly attach different elements to each other, using the steel pins included in the delivery. RuumX kits come in two varieties, differing only in the height of walls and dividers. The lower version has a height of 14.5 cm and fits the Aluboxes A042 and S060, the higher one can be used for both S060 and A073 and has a height of 19.5 cm. Please noteEgg crate foam for the inside of the lid can be ordered ctseparately to prote sensitive equipment even better.

Door net for New Defender from MY2020 Modern car doors are primarily optimized for lateral impact protection. Small wonder that even large vehicles like the New Defender offer relatively little storage space in the door paneling. With our new storage nets for driver and passenger door of the New Landy you can pretty much double the available space of your door pockets - for all the things you want to keep within reach, in summer and winter. The elastic mesh material also ensures that you’re using only the space you actually need. And when you take your New Defender off-roading, the nets also make sure that everything you keep in the door pockets will actually stay there. The nets are simply screwed into the door panels using the fastening materials included in the delivery. The door nets come in the colors black, gray and coyote and are sold in pairs for driver and passenger door.

Sun visors in your car offer few functions beyond the obvious: make-up mirrors for female passengers, maybe, or flimsy card holders for permits, IDs and similar items. We’ve been offering our popular and very successful universal visor organizers for quite some time now and they are the perfect solution to stack the humble visors with additional functions. If you are looking for great, custom-made organizers for both visors in a New Defender, look no further. Simply slip them on, fasten the Velcro straps, done! MOLLE mesh enables you to attach any MOLLE cases or similar compatible accessories. The bands can also hold sun glasses, pens or small flashlights. Two zipper pouches are perfect for all smaller items that are easily lost: coins, keys, remotes, swipe cards and a lot more. A great place to keep your vehicle documents, parking permits etc. is the dedicated slot on the side of the visor. And to top it all off, our textile studio has worked a lot of Velcro fleece into the organizer so that you can attach all kinds of smaller items. The trusted Nakatanenga sun visor organizer is tidy, versatile and allows for quick access to everything that’s important inside a New Defender! Available in the colors black, gray and coyote. Delivery in pairs for driver and passenger side.

Dashboard bag for Land Rover NEW DEFENDER from BJ 2020, LHD The open dashboard design in the New Defender is no coincidence, of course. This is where the impeccably modern cockpit by design director Gerry McGovern and colleagues pays homage to the interior of the classic Defender, the original Landy. Good for us, because we immediately spotted an opportunity to improve storage capabilities: with our nifty dashboard bag for the New Defender. The open dashboard shelf is where you put all the odds and ends in your car. It was like that in the old Landy, it will probably be the same in the new one. But once you’re testing the L663’s tilt angle or maximum gradient, our new dashboard bag, made from easy-to-clean, robust nylon, will keep your stuff from actually flying around. Installing the bag firmly in the dash takes only a few minutes. The zipper has two sliders so that the bag can be opened and shut from both sides. On the inside, mesh compartments and Velcro fleece allow for organized and secure storage of all kinds of items. The front features MOLLE fleece to attach patches and other little things. Since the New Landy sports a designer cockpit, we used transparent plastic material on top of the bag. This allows for the ambient LEDs in the dashboard and the day light from the opening above to filter through into the bag’s interior. The dashboard bag comes in New Landy compatible colors black, gray and coyote. Installation does NOT require drilling, glueing or other damaging methods. It is completely reversible. We include a detailed installation guide. LHD

Bag for sand sheets Sand ladders, traction boards, foldable ramps or waffleboards – the range of recovery tracks for 4x4s these days is extremely specialized when it comes to different types of use, materials or surface conditions. No matter which kind of board you’re going for, though, there’s always two questions to keep in mind, whether your tracks are made from metal, synthetics or rubber: For one, where are you keeping them, before and after deployment or in seasonal storage? And two, how do you keep your vehicle clean, if you chose to transport the tracks inside the trunk or cargo hold instead of an outside mount? Our Nakatanenga board bags will conclusively solve both issues. Whether it’s our own Maximum Traction boards, GFK Waffle Boards, aluminum sand ladders or any other product from MAXTRAX, TREDS, HEBE etc., the bag will fit any recovery board up to a maximum size of 1200 x 340 mm. With its depth of 130 mm at the sides, the bag is specifically designed for synthetic boards and their greater thickness when compared to classic metal sand ladders. However, the wide cut of the bag allows for a stack of boards of up to 180 mm in total. Inside the bag, we have sewn-in two adjustable straps with quick-release buckles to secure stacks of boards and prevent any sliding or shifting. The fabric is made from robust 100% PU-coated nylon to ensure quick cleaning by brush or water hose. It is also machine washable at 30 Celsius. Strong seams, sturdy straps and durable zippers are, as always with our own textile products, a given. There’s also a MOLLE fleece patch to identify your kit with patches, stickers or tags. Color: BlackGrey CoyoteCoyote Material:100% PU-coated Nylon Dimensions:L 1200 x W 340 x D 130 mm The wide cut will ensure that a stack of boards of up to 180 mm in total will fit inside the bag.

How can you improve our ingenious Tool Rolls when it comes to making them more compact, more functional and even quicker to access? By adding one or two of our ½“ and ¼“ organizers for socket wrench sets, of course. It’s really easy, attach the socket organizer’s Velcro strap to the Tool Roll’s fleece, push the sockets onto the studded clips and roll the whole thing up. There you go, that’s order and organization for you. No more fumbling around in oily pouches or cluttered boxes to find the right sockets. The high-quality holders feature 8 studs each for half or quarter inch sockets. The smaller Tool Roll S fits one organizer, the medium M will fit two across. The studded brackets holding the sockets sport metal ball bearings, just like a quality ratchet, thereby guaranteeing a firm and secure grip during storage and transport. Additionally, the individual brackets can be shifted (or removed entirely) to accommodate different socket sizes. Inside the Tool Roll, the organizer is held in place by a robust Velcro strip made from sturdy Nylon and strengthened by a plastic plate. The organizer rail in turn is attached to the Velcro strip by two elastic straps. That way you can easily take out the organizer rail or swap it for another one, without compromising the exact positioning within the Tool Roll. If you’re used to packing your roll really tightly, you will appreciate this detail. Sockets are NOT included in the scope of delivery! 

       Model    Volume    Measurements inside    Measurements outside ABP-T010        10 litres               370x200x140 mm                  400x230x156 mm                        ABP-T019 19 litres 500x220x170 mm 530x250x186 mm ABP-S020 20 litres 360x260x180 mm 390x290x200 mm ABP-S023 23 litres 470x350x140 mm 500x380x160 mm ABP-A029 29 litres 360x260x310 mm 390x290x330 mm ABP-A042 42 litres 550x350x220 mm 580x380x240 mm ABP-S060 60 litres 550x350x310 mm 580x380x330 mm ABP-A073 73 litres 550x350x350 mm 580x380x400 mm ABP-S056 56 litres 1220x240x190 mm 1250x270x210 mm ABP-S067 67 litres 550x550x220 mm 580x580x240 mm ABP-S074 74 litres 750x550x180 mm 780x580x200 mm ABP-A081 81 litres 750x350x310 mm 780x380x330 mm ABP-S115 115 litres 550x550x380 mm 580x580x400 mm ABP-S120 120 litres 750x550x280 mm 780x580x300 mm ABP-A134 134 litres 850x450x350 mm 880x480x370 mm ABP-A157 157 litres 750x550x380 mm 780x580x400 mm ABP-S175 175 litres 550x550x580 mm 580x580x600 mm ABP-S163 163 litres 1150x350x380 mm 1180x380x400 mm ABP-S192 192 litres  2100x480x190 mm  2130x510x220 mm ABP-S198 198 litres 1130x720x225 mm 1180x770x260 mm ABP-A240 240 litres 750x550x580 mm 780x580x600 mm ABP-S350 350 litres 1150x750x400 mm 1180x780x420 mm ABP-A415 415 litres 1150x750x480 mm 1180x780x500 mm ABP-S550 550 litres 1150x750x630 mm 1180x780x650 mm ABP-S690 690 litres 1150x750x730 mm 1180x780x750 mm                                           Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina.  Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!

Whether you’re hiking in the wilderness or driving your car on or off the road, life without properly functioning smartphones, GPS navigators, tablets or powerbanks has become inconceivable. But for our electronic helpers to reliably do their jobs, they require protection – from the elements, from damage and from theft. Our Nakatanenga protective carrying pouch is made from high quality Nylon 1000D and measures 17 x 21 cm (15 x 20 on the inside). That makes it the perfect carrying case for a Garmin Overlander, an iPad mini and many other devices. If you have to carry expensive GPS or communication devices with you or you don’t want to leave them behind in your car where everyone can see them, our gadget pouches are the perfect solution for you. When it comes to materials and workmanship, our textile shop – as always – aimed for a much higher degree of robustness and functionality as is standard with regular accessories. The virtually indestructible outer Nylon layer protects from dust, dirt and water spray and the soft fleece on the inside ensures that smaller shocks are no problem either. The carrying pouch can be attached to almost anything by the two solidly sewn-in D-rings. Moreover, the pouch is MOLLE compatible, making it capable of attaching it quickly and securely to MOLLE mesh, as you’ll find for example on our Nakatanenga backpacks, our seat covers or the tailgate organizers. The protective carrying pouches come in Camouflage or Gray/Coyote.