27 LED Tent Light Starter Kit, 155 lumens, length: 30cm Operation with 12 V via plug or with 230 V with adapter (both included) 30 LEDs on a rigid, 30 cm long light strip for a light output of 155 lumens Includes clips, adhesive pads and adhesive tape for mounting 2 m cable for flexible positioning.

he 3D mattress pads are ideal for roof tents and other applications. These so-called spacer fabrics are ideally suited for rear ventilation of mattresses in roof tents, campers and on yachts. "Floating like on clouds" takes on a new meaning with these high-distance structures. The mat is placed between the mattress and the attic tent floor and contributes to a healthy and restful sleep thanks to its climate regulation. The mattress pads have matching cutouts for the tent poles on both sides. Thickness: 10 mmWidth: ideal for our Roof Lodge roof tents 140/165 and for other 140 cm and 165 cm wide roof tentsLength: 230 cmMaterial: 100% polyester Note: If necessary, the documents can be cut with any good household scissors. The optimal ventilation of the mattress base made of 3D fabric works like an invisible air conditioning system. Around 1 million upright PE threads per square meter allow moisture to escape ideally before it leads to waterlogging, mold stains or the formation of mold. Due to the excellent air and load distribution of the 3D fabric, the mattress base adapts to every contour, which significantly increases comfort. Please select the appropriate width.  

Sensationally cheap These are the same material as our mattress pads for the roof tents. This so-called spacer fabric is optimally suited for ventilating mattresses and is therefore particularly well suited to where the air has to circulate. The 1 million upright PE threads per square meter also guarantee excellent load distribution. The 3D fabric adapts perfectly, which significantly increases comfort. Due to the cushioning and cushioning effect, the material is ideally suited for conversions on mobile homes and the like. Thickness: 10 mmWidth: 26 cm / 30 cm - please choose the desired versionLength: 1 meter - a maximum of 5 meters is possible in one pieceMaterial: 100% polyester Note: The 3D mesh can be cut with any good household pair of scissors, and can also be easily sewn into larger surfaces by hand or sewing machine with a strong thread. Normally you will get up to 5 m at a time. For special blank requests, please contact us in advance (meter by meter). The 3D mesh material is available in 26 cm and 30 cm width - delivery in whole meters. 9€ / m²

- can be used with 12 volts (plug) or 230 volts (mains adapter), both supplied - 90 LEDs on a flexible, 90 cm long light strip with an output of 294 lumens - comes with clips, sticky pads and tape for attachment - 2 metres long cord for flexible mounting

The Roof Lodge Evolution awning ... which can also be used on many roof tents from other manufacturers. The widespread term <awning> is somewhat misleading in itself, as it has always been more of a hanging tent in which you can quickly and easily store camping equipment such as a table and chairs, the little ones' toys and a pint of beer. This not only applies to tidying up in the evening, but also in the event of a downpour. What's more, the fact that these items are no longer immediately visible makes them a little safer from theft. We also like to refer to this awning simply as a <shower curtain>. This name also gives you an idea of the actual size of the hanging tents. This is always 120 cm in depth and 140 cm or 165 cm depending on the tent width. This makes them significantly larger than most showers, but still smaller than what many people imagine. However, if the roof tent is installed at a sufficient height, you have a space that can also be used comfortably for changing. These awnings were and are less suitable for use in bad weather. This results in a requirement profile for them that is completely different from that of the floor tents of the extended tents. As the awning's tent character is clearly in the background, we have given it some thought and completely redesigned it according to its use. They are now made from the same material that we already use for our LIGHTWEIGHT - T109 ripstop nylon with Oxford weave. This material is surprisingly strong for its surprisingly low weight of just 102 g/m² and is the obvious choice for use in an awning. As awnings, like ground tents, usually have to be transported in the vehicle, the pack size is not insignificant. The fact that the usual voluminous and heavy PVC groundsheet has been replaced by a thin and light tarpaulin means that the pack size of the awning can almost be described as tiny.   Due to the type of use, elaborate window constructions are as pointless as spikes for ballerinas - nobody uses them. Of course, windows do have a right to exist in hanging tents; after all, you can not only see outside through them, they also let light into the tent. But this is where the T109 ripstop nylon comes into play again: this material has good light permeability, which puts the question of windows to rest once and for all. The entrance is usually located behind the ladder, which literally stands in the way of quickly stowing away the equipment. That's why we decided not to have an entrance. Some people will now say that Nakatanenga have definitely overshot the mark. But we simply questioned the design of the usual entrances with the entrance fabric, mosquito net and zippers and found that they were not necessary. Our awning therefore doesn't have an ENTRANCE, but of course there is an ACCESS - in fact several. The awning is fitted with zippers at all 4 corners. These can be used to separate the side walls from each other and thus not only determine the access as desired. You can also roll up one or all of the side walls. In the evening, for example, all you need to do is place the table and chairs on the tarpaulin, unroll the side walls and close the zippers. And the awning also offers real added value: the side tent walls also have two eyelets on the underside. The side walls can either be tensioned at an angle or extended using optional telescopic poles. This creates a rain-protected or shaded area of just under 5.5 by 1.2 meters. The awnings are suitable for all roof tents of the appropriate size that use the edge profiles shown on the Roof Lodge Evolution and LIGHTWEIGHT information pages. If you are not quite sure, please do not hesitate to contact us. It is not possible to use the awning and shoe bag at the same time. Note: The telescopic poles are NOT included in the scope of delivery.  

Sewing tool for minor repairs This easy-to-use sewing tool is virtually indispensable for every household. Strong textile materials such as tarpaulins, leather or imitation leather are sewn together with upper and lower thread similar to a sewing machine permanently, stably and visually appealing. Suitable for sewing on tarpaulins, tents etc. Thus, this tool is ideally suited for minor repairs to roof tents. Easily repair rising seams or small accidents yourself in no time. Delivery:Sewing tool with spool and needle

CargoBear - Awning holder for New Defender One of the best moments when car camping or at 4x4 meetings is unfolding the roof awning. It means you've arrived and the cozy part is about to begin. Once the awning is up, you can lounge in your camping chair, put your feet up and plan your next activities over a coffee or a cool drink. And since the CargoBear is also available for the New Defender, there is also the option of attaching numerous awnings and awnings. Our awning holders made of black powder-coated stainless steel are screwed onto the slope of at least two crossbars and are suitable for awnings such as the RoofLodge Awning, RhinoRack Foxwing and SunSeeker.  The 3-piece set is supplied including the necessary mounting material for attaching the awning holder to the CargoBear roof rack. Fastening material for the awning is not included.    

One of the best moments when car camping or attending a 4x4 meeting is when you unfold your side awning from the roof rack. It means you’ve arrived and all the enjoyment is ahead of you. Sheltered by the tarp, you can rest easy in your camping chair, put your feet up and think about the things to come over a coffee or a cold one. Since there is now a CargoBear for the Jimny II, you can also mount a variety of car awnings on it. Our mounting brackets are made from black powder-coated stainless steel and are fixed to the lateral incline of at least two CargoBear cross bars. They fit amongst others the RoofLodge Awning, RhinoRack Foxwing and RhinoRack SunSeeker. All fixing materials to the roof rack are included. Not included is the fastening material for the awnings themselves. suitable for all CargoBear 1 + 2.

CargoBear Mounting brackets for Awnings The CargoBear awning holder allows you to mount numerous awnings on the CargoBear roof rack for Defender and on the CargoBear roof rack for Mercedes G. It is suitable for the following awning models, among others: RoofLodge Awnings RhinoRack Foxwing RhinoRack SunSeeker At least two CargoBear cross bars are required for assembly. The 4-piece set is supplied including the necessary assembly material for attaching the awning holder to the CargoBear roof rack. Fixing material for the awning is not included. The awning holder is made of stainless steel. It can be used on all CargoBear carriers with 30° feet (e.g. Land Rover Defender or Mercedes G). Material: black powder-coated stainless steel Suitable for all CargoBear 1.0 + 2.0 roof racks!

CargoBear Quick mounting rails for various roof racks If you use your roof tent frequently or want to mount it on different vehicles, our quick mount system for roof tents is an enormously practical and time-saving solution. Whether CargoBear, FrontRunner or other roof rack systems, fastening our practical, two-part mounting rails is a question of minutes. Each rail’s bottom is attached to the carrier and the top to the underside of the roof tent, thereby providing and easy to reach connection that is equally quick to fasten or loosen again. That way, you only drive your tent around when you're actually going camping. As a general rule, two rails will be sufficient for mounting most tents. However, for larger/longer hard-shell tents, for example, we recommend using three rails. The black powder-coated bottom part (on the roof rack) of each pair of rails is attached to the stainless steel top part (on the roof tent) with two to four screws.Compared to the old frame solution, the enormously space-saving quick-change rails are very easy to pack – leading to significantly lower shipping costs compared to the expensive special delivery charges for the old system.You are not sure whether a roof tent can be mounted on your vehicle? We are happy to help and advise you! So far, we have found the perfect solution for almost every vehicle. Length: 113cmHeight: 5,5cm Just get in touch at +49 (0) 9181 466 644 Please note:the basic set consists of 2 rails with 2 upper and 2 lower parts each (4 parts).Normally, the basic set is sufficient for the assembly.E.g. for large roof tents you can mount an additional rail (2 parts) for more stability.

Sense and purpose of an awning compact extension? Glare protection when the sun is low in the skyThe compact extension was developed directly from practical requirements - a nice formulation that in itself means nothing more than: "We were so annoyed and dazzled by the low sun one fine day that we wanted to remedy the situation." And already the initial question is actually fully answered. But that would only be half the truth. On the following picture you can see an awning without extension shown above: As the sun sinks (the same applies in the morning, of course - but for the sake of clarity we will limit ourselves here to the afternoon or evening situation), the light falls further and further under the awning. At a certain position of the sun, the light/shadow dividing line reaches the eye level of a seated person - from now on, the sun can dazzle until it sets. The illustration below shows an awning with a compact extension, which offers several advantages with its angled bracing: When the sun is high, a much larger area is shaded.Only when the sun is setting, the light/shadow dividing line reaches the eye level of a seated person. Here, of course, deviations are possible, since both the slope of the guy, the size of the person and his sitting position are influencing factors.But the most important thing is: You can see what's going on in your surroundings despite the glare shield! If the eyes and the lower edge of the compact extension are on a horizontal plane, then the view would extend exactly to the (ideal) horizon. If you compare that with a moderately braced complete front part, where the view is just between a few centimeters to a few steps - what a difference! What if the sun comes in from the side?Well, then the vehicle will probably have to be moved. But not with our new compact extension. All you have to do is unhinge it from the front and you can attach it to the side in just a few easy steps. Voila!But please note: The awnings have a uniform depth of two meters, but differ in their widths. Ideally it hit here all those who have a 200er awning. Owners of a 250 have three options: They simply allow the extension to protrude when used from the side - utility over beauty.You opt for a 200 compact extension - this does not detract from the function.You buy two compact extensions at once - a 250 for the front and a 200 for the side. Feel free to guess what we recommend ;-) Material:Made from our sun sail and awning fabric, a 280 gsm RipStop Polycotton (65% polyester / 35% cotton), metal coated on one side; water and dirt repellent impregnated;due to the comparatively heavy quality, significantly less flutter. Color: stone grey (taupe)  Our compact extensions are also suitable for use on the awnings of most other manufacturers. The only requirement is a free keder strip in the front profile of the awning or such must be retrofitted.  

Roof tent accessories - roof tent hood A roof tent hood as a spare part in the color black - suitable for all Roof Lodge Evolution 1 and 2 (140 and 165 - Basic and Extended) and Roof Lodge Lightweight. The roof tent hood is also suitable for roof tents from other manufacturers with the same dimensions. The picture is for illustration purposes only, we reserve the right to make technical changes.

Extension for Evolution Awning / Blind This extension is made from the same high-quality material like the Nakatanenga Evolution Awning / blind and gives ideal side sun, sight and wind protection. The extension is simply fitted to the existing welt track / c profile of the awning. With a diameter of 6.5 mm the welt fits to a number of awnings on the market. The extension can be secured to the ground with supplied pegs and cords. The full length of the extension is 200 cm. Surface area: 200 x 140/200/250/300 cmmaterial: 280 g/sqm rip-stop Polycotton, PU coated; water and dirt repellent; due to the relatively heavy quality reduced wind noise Attention: The extension can’t be used at the same time with the awning for the blind as both use the same c-profile for attachment. The awning is not included in delivery! Please order it separately here (200 cm, 250 cm, 300 cm) or here (140 cm). If you want to erect the extension as shown in the 4th image, you can order an additional pair of pegs.

Extension strip for Evolution front and bottom tents The front and bottom tents of the EVOLUTION series are designed for a tent mounting height of up to 210 cm. If the roof tent is mounted at a higher height, then an extension strip should be used for these front or bottom tents, which compensates for the missing difference. The extension strip is simply zipped between the bottom pan and the underside of the tent sidewalls and compensates for a net difference of 20 cm. Of course, the zipper thus added is protected by a tarpaulin from direct rain. Please note:The awning (Basic) and floor tent (Extended) look very similar, so we ask you to measure the lower circumference of your tent, where the extension strip is used. Please give us the dimensions of the scope by phone before placing your order, so we can ensure that you receive the right extension strip. Tel .: 0049 9181/466644 Thank you very much.

EXTENSION STRIPS for Evolution 2 Ground Tent Extended, stone grey EVOLUTION Series II Extended ground tents are designed for a tent mounting height of up to 210 cm (Extended 165) or 200 cm (Extended 140). If the roof tent is mounted at a greater height, then an extension strip should be used for this ground tent to compensate for the missing difference. The extension strip is simply zipped in between the floor pan and the underside of the tent side walls and compensates for a net difference of 10 cm. Of course, the zip added in this way is protected from direct rain by a tarpaulin.

Car awnings are fantastic pieces of kit. Where else can you chillax better after a hard day on the road or outdoors than in the shade of a car awning? Correct, the answer is nowhere! This fitting set is designed to mount various car awnings and awning tents with 90 brackets or suitable adapters onto traditional roof rack systems with square steel bars. We recommend that each bracket is fixed by two counter plates both on top and underneath the square bar. M8 hex bolts and stop nuts guarantee secure fastening. Contents:8 x counter plates, 8 x M8x50 hex bolt, 16 x 8.4 mm washers, 8 x stop nuts

Roof Lodge Evolution Front Extension Arc Shape for Car Awning (Bag Awning). The extension is made from the same high quality material as the Roof Lodge Evolution canopy / awning and provides ideal sun, privacy and wind protection. The extension is simply pulled into the existing keder rail of the awning. The extension has a keder diameter of 6.5 mm and is therefore also suitable for many other awnings. The corners of the extension can be fixed to the ground with the pegs and ropes included in the delivery. The extended length of the extensions is always 200 cm, regardless of the width. Compared to standard awning extensions, this extension has a small curve at the outer end, so that the extension has ideal tension when stretched. This means that it flutters less and withstands stronger winds better. It can be tensioned at an angle or vertically! With an extension that reaches all the way to the ground, you usually feel quite isolated from the surroundings. No wonder, because a completely pulled-down side almost looks like an incomplete awning, but without offering the advantages of an awning. The awning front extensions are available in the following widths: 140, 200, 250 and 270 cm. The length is always 200 cm for all of them Material:280 gsm RipStop polycotton (65% polyester / 35% cotton), PU-coated; water and dirt repellent; significantly less fluttering noise due to the comparatively heavy quality. Attention:The extension cannot be attached at the same time as the awning awning, as both are attached to the same keder rail. Scope of delivery: 1 piece awning extension in the shape of an arch 2 pieces of cords 2 pegs The awning is not included in the scope of delivery! The additional telescopic poles, which can be seen in some pictures, are not included in the scope of delivery of the extension, but are optionally available. Important note: As a subsequent delivery of the materials for this product requires a lot of time, please request the desired item by e-mail if you are interested.    

Front parts for our awnings series Evolution 2 ... are also suitable for the awnings of other manufacturers - the aluminum front profile must only be equipped with a free keder profile for this purpose or one must be retrofitted. Front parts fulfill - especially in combination with our awning side parts - various functions: They are an excellent windbreak - this is where the relatively heavy fabric (280g/m² PU-coated RipStop polycotton - our stone-grey sun sail and awning fabric) comes into play, which is characterized, among other things, by the significantly reduced fluttering noise.They are the ideal rain protection - for this purpose, our sun sail and awning fabric is metal-coated on one side (inside) and water- and dirt-repellent due to the impregnation of the other side (outside).They can be tensioned or also displayed by means of optionally available telescopic poles and thus increase the shaded area immensely. Because of the small and in itself not worth mentioning packing size, our awning front parts as well as our awning side parts belong to these small things with the enormous benefit. If the awning protects from the evening and night chill from above, these awning extensions again significantly increase the comfort. The inside metal coating - primarily the wetness barrier layer - naturally contributes its part to this, reflecting not only the light of a lamp that is probably present, but also to a certain extent emitted thermal radiation (this effect is minor, but quite noticeable). Material:65% polyester / 35% cotton

Finally arrived at the perfect place to make yourself comfortable in the roof tent. And who does not know that: the ladder wobbles because the ground is uneven or even the ladder slips away. This is extremely annoying. The solution is so easy for us.With these leveling feet for roof tent ladders you can adapt to any local conditions. Due to the rubberized surface even a smooth surface is no longer an obstacle. Uneven ground or if you are in the slope, that's no longer a problem. You have a secure grip on asphalt and beyond the paved road. Instructions: Please follow the steps in the pictures (see gallery pictures from step 1 to step 6). Consisting of:2 pieces knurled screw2 pieces of joint feet2 pieces mounting bracket1 piece of storage bag

Musterstoffe Dachzelt 2023/'24: Sind Sie sich nicht ganz sicher, ob der Zeltstoff oder dessen Farbe für Sie richtig sind? Dann nutzen Sie unseren kostenlosen Muster-Service - versandkostenfrei und ohne Mindestbestellwert innerhalb Deutschlands.Welcher Stoff ist was? Format der kostenlosen Stoffmuster: jeweils ca. 5 cm x 5 cm. Netz schwarz:  Moskitonetz Stoff hellbeige: Sonnensegel 102 g/m² -> Roof Lodge Lightweight DachzeltStoff dunkel oliv: Zeltstoff 102 g/m² -> Roof Lodge Lightweight Dachzelt Stoff dunkelblau: Zeltstoff 320 g/m² -> Roof Lodge Evolution2 DachzeltStoff coyote: Zeltstoff 320 g/m² -> Roof Lodge Evolution2 DachzeltStoff steingrau, einseitig metallbeschichtet: Sonnensegel 280 g/m² -> Roof Lodge Evolution2 Dachzelt PVC klar: Fenster (Bitte beachten Sie: PVC sollte niemals mit Alkohol oder alkoholhaltigen Reinigern behandelt werden! Verwenden Sie für diesen Zweck ausschließlich klares Wasser oder einen für PVC zugelassenen Reiniger.) TPU kaki: Dachzelthaube (2021; auf Anfrage)PVC schwarz: Dachzelthaube (2023/'24) - im Booklet nicht enthalten! Zelthaut des Lightweight-Zeltes aus 100% Oxford-Nylon mit Ripstop, ein extrem festes, aber erstaunlich leichtes Material, das gerade einmal 102 g/m² auf die Waage bringt. Das ist im Vergleich zu dem 320 g/m²-Gewebe unserer Evolution 2 eine Reduktion um satte 78%.  Die Zelthaut und das Sonnensegel des Lightweights sind dabei stofflich identisch, innen PU-beschichtet und außen imprägniert. Das bedeutet, dass bei Wind- und Regenschutz keine Abstriche gemacht werden.

Foam mattress for your roof tent The mattress is available in sizes 140 cm x 240 cm x 6 cm and 165 cm x 240 cm x 6 cm. The delivery takes place WITHOUT mattress cover! Material:The mattress is made of foam with a sub-cover made of 100% cotton. Annotation:The hard version is basically suitable from about 100 kg. Please note that the feeling is subjective and the hard variant may still be too hard for you. Also this mattress is: "Made in Germany" Please select the appropriate width. Please note: For hygienic reasons, this item is generally excluded from return.

Montagepauschale für die Nakatanenga Roof Lodge Dachzelte in unserem Hause. Wahlweise mit oder ohne Einweisung (wählen Sie bei der Bestellung bitte die passende Variante aus) Der Einbau erfolgt zum angegebenen Fixpreis, unabhängig von der Dauer. Bitte beachten: Der Preis bezieht sich nur auf die Montagepauschale, die zu montierende Ware ist separat zu erwerben. Bitte geben Sie bei der Bestellung Ihre Telefonnummer für die notwendige Terminabsprache mit an. Die Montage ist nur vor Ort in Berg bei Neumarkt (Postleitzahl: 92348) möglich.

Mosquito net as awning for Nakatanenga Awning (or other awnings with the same dimensions) This mosquito net, which is exactly adapted to the dimensions of the Nakatanenga Awning, serves as a pleasant protection against annoying - and possibly also dangerous - mosquitoes. If you close all four outer sides, the mosquito net allows you to comfortably "sit outside" without restricting the air circulation - and the pests have to stay outside! Not only useful in the tropics, Scandinavian holidays in summer are also much more pleasant with fewer mosquito bites. The mosquito net has a ceiling surface that is connected to the 4 side panels without gaps. With this mosquito net awning you stay free of bites & itches and thus ensure a pleasant holiday feeling!

Mounting kit for Roof Lodge roof tents on Frontrunner roof racks Four longer counter plates, are needed for mounting our old Roof Lodge roof tents on Frontrunner roof racks. The counter plates can also be used for mounting our quick mounting rails on roof racks with wide crossbars! Material: Stainless steel