Allows you to easily install 100 mm or 130 mm speakers in your Land Rover Defender, either slim (16 mm) or voluminous (27 mm) designs. Ships in pairs

HELIX S 4XThe new S speaker series turns every journey into a special sound experience with high sound quality The 2-way coaxial system scores with its extraordinary sound quality and the new, timelessly elegant design. Equally unique, sensitive and crystal clear, the silk dome of the tweeter conjures up the music in the room. Due to its central arrangement in the low-mid speaker, the music is perceived as a point source of sound and thus optimizes the tonal balance. The result is an incredibly homogeneous and natural sound. The stiff and at the same time light diaphragm of the bass-midrange driver consists of a new type of basalt fiber-paper compound. A perfect combination to guarantee clear, unadulterated sound even at high volumes. The S coaxial system plays in top form in conjunction with a power amplifier from Audiotec Fischer. A superlative sound experience Properties: 100 mm bass-midrange driver with a new type of basalt fiber paper compound membrane - an ideal combination of low weight, high rigidity and internal damping Specially shaped rubber surround for a larger effective membrane area and extended maximum stroke 19 mm tweeter with coated silk dome for balanced, natural reproduction and minimal compression effects Basket in individual HELIX design with additional ventilation openings for optimized cooling of the voice coil for high load capacity Separate inline crossover with 6/6 dB slope and integrated tweeter protection Technical specifications:Power RMS / max. 60/120 wattsFrequency range 80 Hz - 25,000 HzImpedance 4 ΩEfficiency 1 W / 1 m 89 dBMembrane material HT: coated silk dome; MT: -; TT: basalt fiber paper compoundSeparate crossover, 6/6 dB slopeOutside diameter 102 mmInstallation diameter 92.3 mmInstallation depth 46.5 mmDimensions crossover 59 x 49 x 24 mm Scope of delivery:2 x coaxial loudspeakers HELIX S 4X2 x frequency crossover1 x mounting material1 x instruction manual1 x installation template

HELIX S 42C.2 Excellent sound qualityWith the S speaker series, every journey becomes a special sound experience. The sophisticated design and the use of the latest technologies guarantee excellent sound characteristics with powerful bass, precise mids and crystal-clear highs. Elegant designIn addition to its excellent sound characteristics, the S 42C.2 also impresses with its elegant, timeless appearance. The transparent "Flex-Crossover" with its high-quality components and the elegant aluminum housing of the tweeter in particular make this system a real feast for the eyes. Simple integrationThe well thought-out design with low installation depths, a removable tweeter housing and the very compact and innovative "Flex-Crossover" crossover offer considerable scope for installation - even where space is particularly limited. In addition, cabling between the individual components is simple thanks to plug & play connection cables. Maximum flexibility - "Flex-Crossover"The new "Flex-Crossover" crossover is not only a visual highlight, but also has a number of technical refinements. In order to drastically reduce the dimensions once again, the circuit board can also be installed without a housing in a supplied foam or split in two for separate installation (e.g. tweeter in the A-pillar, woofer in the door). In addition to a 3-stage tweeter level adjustment and plug & play cable connections, the crossover is also equipped with screw terminals for even greater flexibility when connecting with your own speaker cables. Features◾100 mm bass-midrange driver with innovative basalt fiber-paper compound cone - an ideal combination of low weight, high rigidity and internal damping◾25 mm tweeter in an elegant aluminum housing with coated silk dome tweeter for balanced, natural reproduction and minimal compression effects◾Basket in individual HELIX design with additional ventilation openings for optimized cooling of the voice coil for high power handling◾"Flex-Crossover" crossover with 12/12 dB slope, blocking circuit and 3-stage switchable tweeter level adjustment - separable and therefore perfectly suited for installation in vehicles with separate installation locations for tweeter and mid-bass driver◾Exclusive use of very high-quality components in the crossover, such as distortion-free air-core coils and low-loss Audiotec film capacitors in the tweeter branch Technical data Power RMS / Max.  70 / 140 Watt Frequency range 75 Hz - 25.000 Hz Impedance 4 Ω Efficiency 1 W / 1 m 89 dB Membrane material HT: Beschichtete SeidenkalotteMT: -TT: Basaltfaser-Papier-Compound Crossover  12/12 dB mit Sperrkreis, Hochtonschutz  und Hochton-Pegelanpassung Outer diameter HT: 51 mmMT: -TT: 102 mm Installation diameter HT: 45 mmMT: -TT: 92,3 mm Installation depth HT: 14 mmMT: -TT: 46,5 mm  Crossover dimensions  112 x77,5 x 27 mm   Scope of delivery 2 x HELIX S 1T tweeters incl. mounting material2 x HELIX S 4B bass-midrange drivers2 x Flex-Crossover crossover4 x foam mat1 x mounting material1 x operating instructions1 x mounting template

High quality Land Rover Defender radio antenna The successor to the popular Hirschmann radio antenna, which is no longer available! This radio antenna has excellent radio reception and scores with high quality optics. Since conventional antenna feet are usually too big, we have decided here additionally for a special production for the Defender. This custom foot fits perfectly into the original opening in the Land Rover Defender fender. Since the Defender offers little space for a sticky antenna, we have made an off-road capable antenna suitable for Defender optics. With this antenna you also have no interference due to the wires of the windscreen heater! The Defender variant is suitable for all Land Rover Defender 90/110/130 with existing antenna or antenna bore. This radio antenna is manufactured by a well-known antenna manufacturer and supplemented by us with the right antenna base. Upon delivery, you will still receive the original foot of the antenna. You will need to remove it and mount it with the included Land Rover Defender mounting foot. The robust antenna is particularly suitable for off-road use and offers a comprehensive reception of AM, FM, DAB, DAB +! With DAB + you get the most modern reception variant that exists on the market. This allows a grandiose reception of your favorite radio stations! Incidentally, you will find a universal radio antenna here! Technical specifications: Antenna length: 45 cm Cable length: 295 cm Reception: AM, FM, DAB, DAB + Delivery: 1x radio antenna with original foot 1x mounting foot custom-made (specially made by us) 3 different SMA/SMB adabters for the most common DAB & DAB+ Devices 

External GPS antenna for GeoSafe alarm and tracking tracker The external antenna improves the GPS reception of the GeoSafe alarm and tracking tracker. The antenna has a magnetic base that allows it to rest or hang on metal surfaces without slipping.Technical data:Frequency: 1575.42 MHZVoltage: 3,0 - 5,0 VoltCable length: 5 metres

DAB+ car splitter adapter, antenna amplifier and crossover With this active antenna splitter, you can use the vehicle's existing FM radio antenna for additional DAB / DAB+ reception. It is therefore ideal for retrofitting DAB receivers. There is no need for a time-consuming replacement or retrofitting of another antenna. The integrated amplifier compensates for the attenuation that usually occurs with antenna combiners and can even lead to better FM reception.Some radios apply a voltage of 12 V to the antenna cable, the so-called phantom power, which supplies the antenna amplifier. In this case, it is called an active antenna. Common receivers cannot provide this 12 V to operate the amplifier - you need a phantom power adapter. In contrast to many other antenna combiners on the market, this active antenna combiner also takes care of this task. An additional phantom power supply adapter is therefore not necessary!Please note that for the correct splitting of the signal, the frequency band of the active antenna must not be filtered. For this purpose, "DAB ANT POWER" must be set to "ON" in the setup of the radio (if available)! Suitable for DAB+ radios from e.g. JVC, SONY, Alpine, Pioneer etc.     DAB / DAB+ reception via the original antenna - no need to replace the antenna or retrofit a DAB antenna!    Also suitable for antennas with phantom power (active antennas) - no phantom power adapter necessary!    Decoupled signal outputs - no mutual interference in case of impedance fluctuations!    Suitable for antenna rod lengths from 30 cm to 100 cm. Technical data:    Antenna adapter length: approx. 34.5 cm    1 x SMA plug, gold-plated    1 x antenna plug    1 x antenna socket    12 V connection cable with fuse    Amplification: approx. 20 dB    Power consumption: 6 mA    Noise figure: <2 dB