BlueSea ANL fuse, 750A, max. 32V Specification: Silver plated plug blades for corrosion resistance. Visible indication of blown condition 6,000 ampere interrupting capacity (AIC) meets ABYC requirements for DC main circuit protection on large battery banks For use with ANL fuse block holders 5/16" (M8) mounting holes 22mm x 81mm (7/8" x 3 3/16") Depth varies depending on power rating Suitable for DC systems between 6V and 80V Suitable for AC systems up to 32 V Blue Sea part number 5163, 8-25163 Cooper Bussman ANL-750 Eaton ANL-750 Battery Booster Starter Pack Main Fuse UL recognised, CSA certified, 35-750 A @ 80 Vdc, IR 2700 A, Guide JFHR2, file E56412, Class 1422-30, File 53787,

Nakatanenga Double Socket USB and USB C Socket incl. Spacer USB socket type A and C, round, suitable for 12V and 24VInput: DC 12V-24V,Output: Type A (QC3.0 port): 3.6-12V / max. 36WOutput: Type C (QC4.0 port): 5V-20V / max. 60WWith the output type C can also charge laptops of any kind (slow charging)Hole diameter hole: 29mmPlease note the installation depth if you want to install the USB socket e.g. in a parking heater console or a valuables compartment. As the USB socket is slightly longer than a normal 12 volt socket due to the Quickcharge, please use the spacer supplied. Socket has an ON/OFF switch and PD technology.

Accessories for OptiMATE solar battery charging systems Product Informations Extension cable with a length of 4.6 m with SAE connection Length = 15 ft / 460 cm 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures SAE built-in socket Length = 100 cm / 40 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing SAE built-in socket (short cable) Length = 15 cm / 6 " Front mounting, rear mounting, for sheets from 1 mm / 0.040 "thickness 2-pole industry-standard SAE connector Max. Cable values: 5 Amp -40 ° C / -40 ° F Use at very low temperatures; stays flexible at temperatures below freezing Plug with rotary adapter, fits on Ø 12 mm MOTORCYCLE / DIN or Ø 21 mm AUTO sockets, with 2-pin SAE connection according to industry standard Length = 20 ″ / 50 cm Industry standard 2-pin SAE connector 8 A fuse (in the plug) Max. Cable values: 5 Amp -20 ° C / -4 ° F Use at very low temperatures With rubber cable gasket for OptiMate heavy-duty SAE connection. Y splitter, SAE IN to 2 x SAE OUTBranching your permanent battery supply line, creation of SAE outputs. Length = 12 ″ / 30 cm Industry standard 2-pin SAE connector. Max. Cable values: 5 Amp -20 ° C / -4 ° F use at very low temperatures With line seals and sealing end caps for OptiMATE heavy-duty SAE connections. https://www.youtube.com/user/TecMate1/about

NATO socket / plug NATO plugs and sockets with the test mark VG 96917 are suitable for a safe power supply and for jump-starting military vehicles, fire engines and rescue vehicles, but also excellent for off-road use. This plug system can be used in the 12 VDC or 24 VDC on-board network. The maximum current carrying capacity is 300A continuous load (peak currents significantly higher). Another practical application is the external feed-in of direct current. Here, a DC supply is possible without opening battery covers or flaps. The NATO plugs / sockets are protected against polarity reversal. Delivery includes contacts.NATO socket, 2-pole12/24 V, suitable for 50 mm²NATO stock no. 5935-12-308-5019, VG 96917 NATO plug, 2-pole12/24 V, suitable for 50 mm²VG 96917 Please also note our bundle with price advantage!

Electrical plug as quick connector Electrical plug in two sizes for 12/24V, 2-pole, as quick connector for winches, jumper cables, etc. The plug is used to lay the battery connections out of the battery box in order to be able to connect the above-mentioned power consumers quickly, conveniently and without the risk of a short circuit.Connection data:Plug small: max. 50 Amp. - max. 5 mm cable diameterLarge plug: max. 175 Amp. - max. 10 mm cable diameterDimensions:Large = length: 8 cm ; width: 5.5 cm ; height: 2.5 cmSmall = length: 5 cm ; width: 3.5 cm ; height: 1.5 cmScope of delivery:Plug (can be used universally as plug or socket).2 contactsProtective cap

Nakatanenga surface-mounted housing Surface-mounted housing, optionally for 12V socket, USB socket or voltmeter, optionally for one, two or three units.Installation panels and devices are for illustration purposes only and are not included in the scope of delivery.

Magnetic plug system for 12 V, consisting of PowerPort connection and PowerClip plug - water- and dust-proof - therefore ideal for off-roaders! Magnets in both the PowerPort (current transmitter) and the PowerClip (receiver) contact the two components and also have a switch function. Therefore, the flat contacts of the PowerPort are only energised when the movable magnetic plate in the transmitter is switched by a suitable pick-up. Other metallic objects or magnets cannot trigger the switching process. Thus, a MagCode PowerSystem is 100% short-circuit-proof. A hinged PowerPort cover is available as an option.  Here you can also find our advantage bundle, consisting of clip, port and cover. Here you can also find the MagCode cover for your Power System or Power System Pro separately. The MagCode system can be used for a wide range of applications where safe but easily detachable power connections are required - whether it's the cool box in the off-roader or the battery charger - but also headlights on the roof rack or the power supply in the roof tent can be solved in this elegant and contemporary way. Technical data: Locking: magneticPowerPower connection: 6.3 mm flat contact for plugging or solderingPowerClip connection: Screw connection, max. 2.5 mm² cableMounting diameter PowerPort: 28 mm (M28)PowerClip projection: 21.5 mmVoltage range: 12 Volt or 24 VoltLoad capacity: max. 15 amps (at +70°C)Port cable length: 72 mm Dust and waterproof : PowerPort front (built-in): IP5K9KPowerPort connection side: IP5K0PowerClip (not connected): IP40PowerClip (on port): IP42Switching cycles (without load): over 10,000Switching cycles (under load): 4,000Please note the instructions for outdoor use The PowerSystem Pro, on the other hand, has a bayonet lock in addition to the magnetic lock, as well as a load capacity of 25 A instead of 15 A. Both systems are available for 12 V and 24 V. A connection cable for the MagCode PowerClip is not included in the order. Please select the desired variant.

Nakatanenga installation panel Installation panel, simple, optionally for 12V socket, USB socket or voltmeter, optionally for one, two or three devices.Devices and consoles shown are for illustration purposes only and are not included in the scope of delivery!

Blue Sea BS 5256 AMI/MIDI fuse 100A Is ideal for electronic equipment where superfast fuses are required. Main features: Superfast fuses ideal for electronic equipment. Classic miniature circuit breakers for automotive and truck fuse protection Tin-plated connectors for corrosion resistance Visible indication of a blown fuse Packaging unit of 2 pieces Technical data: Maximum current consumption: 100A Maximum voltage: 32V DC Breaking capacity: 5000A @ 16V DC 2000A @ 32V DC Battery connection bolt with torque limitation: 4.52 Nm Minimum temperature: -40 °C maximum temperature: 125 °C Material: tin-plated copper CDA 110/UNS11000 MIDI strip fuse 100 A, 2 pieces, e.g. for fuse holder NABS7720, but also for other holders with MIDI sockets. With 125 A, the fuses are ideally suited for protecting our TEXU400 central electrics, which may be loaded with max. 400 A. Suitable for applications up to max. 32 V. Scope of delivery: 2 pieces

Blue Sea BS 5258 AMI/MIDI fuse 150A Is ideal for electronic equipment where superfast fuses are required. Main features: Superfast fuses ideal for electronic equipment. Classic circuit breakers for automotive and truck fuse protection Tin-plated connectors for corrosion resistance Visible indication of a blown fuse Packaging unit of 2 pieces Technical data: Maximum current consumption: 150A Maximum voltage: 32V DC Breaking capacity: 5000A @ 16V DC 2000A @ 32V DC Battery connection bolt with torque limitation: 4.52 Nm Minimum temperature: -40 °C maximum temperature: 125 °C Material: tin-plated copper CDA 110/UNS11000 MIDI strip fuse 100 A, 2 pieces, e.g. for fuse holder NABS7720, but also for other holders with MIDI sockets. With 125 A, the fuses are ideally suited for protecting our TEXU400 central electrics, which may be loaded with max. 400 A. Suitable for applications up to max. 32 V. Scope of delivery: 2 pieces

TEXU400 central electrics for touring vehicles and boats The TEXU400 revolutionises electrical installation. It combines various components that previously had to be purchased individually in a round housing that optimises the use of space and the number of possible connections in the smallest possible space. The special arrangement, which is ONLY available in the TEXU400, enables system integration with groundbreakingly low effort. This results in drastic savings in costs as well as time and space, while at the same time reducing sources of error and providing the highest level of application comfort after installation. It also requires considerably less installation space in a touring vehicle or boat. Extensive electrical systems can thus be planned in a smaller space and the space gained can be used for other purposes. Connection of up to 4 battery banks 11 high-current and 4 standard consumers Plus rail for on-board batteries and consumers Screw terminals and fuses 2x MEGA / AMG fuse max. 400 A 9x MIDI / AMI fuse max. 170 A 4x ATO / ATC / ATP fuse max. 30 A 1:1 ground distributionPut an end to insufficient ground distributions! With the TEXU400, a negative connection is also provided for each positive connection. Simple integration of a summation current measurementThe factory-fitted Sunt bridge between the negative busbars can be easily removed by means of screws and replaced by a plastic bar included in the scope of delivery to enable quick and uncomplicated integration of a measuring shunt. MEGA fuse with double inputWhere cable lugs used to be stacked or other suboptimal constructions had to be devised on a case-by-case basis (e.g. in the case of split cables of powerful inverters), there is now a professional solution: a MEGA fuse point with max. 400 A and double screw connection, ensures professional and safe installation of such components. Ignition-protected according to ISO 8846The UFO is ignition-protected according to ISO 8846 with the integrated, all-round bar with seal. It is therefore also approved for installation in the engine compartment. LED failure check with fibre optics Immediate diagnosis. Fibre-optic cables light up the LED failure check directly at the inscription of the circuits in the closed cover. You can save yourself the trouble of removing fuses and searching upside down for faults in confined spaces! A prefabricated labelling set with partly customisable content is included in the scope of delivery of the TEXU400. Space for spare fusesThe TEXU400 contains additional slots for spare fuses (1x MEGA, 2x MIDI, 2x ATO/ATC/ATP)Convenient opening and closingThe knob centrally located on the enclosure cover makes it easy to open and close the cover and even allows one-handed operation in confined spaces. Please note: As individual electrical installations contain different components that must be suitably fused, a prefabricated fuse set is NOT included directly in the scope of delivery of the TEXU400.

Nakatanenga Double Socket USB and USB C Socket incl. Spacer USB socket type A and C, round, suitable for 12V and 24VInput: DC 12V-24V,Output: Type A (QC3.0 port): 3.6-12V / max. 36WOutput: Type C (QC4.0 port): 5V-20V / max. 60WWith the output type C can also charge laptops of any kind (slow charging)Hole diameter hole: 29mmPlease note the installation depth if you want to install the USB socket e.g. in a parking heater console or a valuables compartment. As the USB socket is slightly longer than a normal 12 volt socket due to the Quickcharge, please use the spacer supplied.Please note: As soon as power is applied, the socket lights up permanently with blue feedback lighting.

Panel with 12V socket and quick connector Mounting panel with 12V socket and quick connector (Anderson style) 12V socket loadable up to 15A Quick connector (Anderson style) loadable up to 50A Optional quick connector as replacement and / or mating connector available separately here: QCGRY-S

Quick connector 2-pole 12/24V Quick connector (Anderson style) for 12/24V, 2-poleThe connector is used to lay the battery connections out of the battery box in order to be able to connect power consumers quickly, conveniently and without the risk of a short circuit.With 12V up to max 50A loadable / with 24V up to max. 25Amax. 5mm cable diameterLength: 5 cm ; Width: 3,5 cm ; Height: 1,5 cmThe quick connector can also be integrated into our mounting panel EB3QC.

Connector / mating connector for Land Rover Defender switch OEM Style Suitable connector / mating connector for switch YUG000540LNF / YUF500150LNF / YUG102440 or our OEM style switches Scope of delivery: connector incl. contacts As spare part for our switches: Switches for Land Rover Defender & Discovery Switch with bezel for Land Rover Defender & Discovery Land Rover Defender OEM switch auxiliary headlights

The Land Rover USB socket fits into the factory switch openings on the Defender Td5 (2002-2006) & Tdci/Td4 (2007-2016). The Land Rover USB socket is designed to complement the original Land Rover switch design.To ensure your Defender dashboard maintains a factory appearance, the outlet is equipped with green backlighting. Each Land Rover USB comes with a mini harness to allow for easy two-wire installation.A multi-plug plugs directly into the back of the USB socket for easy removal. The included mini harness comes with a pre-wired inline fuse, so installation requires nothing more than the ignition supply and ground/earth connections. The Land Rover USB socket also fits into the openings in the Freelander 1, Discovery 2 & 'Soft-Dash' Classic Range Rover. Puma Pod II and all Puma double DIN console switch relocation panels are suitable. USB 3.0 Scope of delivery: 1pc USB socket1pcs Mounting Instructions Translated with www.DeepL.com/Translator (free version)

Glow plug connector Land Rover Defender If the diesel has difficulty getting going when starting from cold, and if it nails and smokes particularly badly, this is often due to the glow plugs. Before replacing the plugs, however, you should first check the condition of the cables and plugs. Often, the problem is simply that cables and plugs are exposed through porous plastic sheathing and the electrical contacts are suffering. As a rule, the service life of the plugs far exceeds that of the cable and plug connections, because cables and plugs and their insulation are naturally much more exposed to mechanical and weather-related influences. With our glow plug connector repair kits, Defender with Td5 and Td4 2.4l engines can be very easily retrofitted in case of problems with cables or connectors. This is also recommended if the glow plug set is being replaced anyway. The advantage of the repair kit is that the next time a problem occurs, it is not necessary to replace the entire wiring harness at great expense; instead, it is sufficient to replace the plug and cable up to the crimp connection. This saves time and money and is also no problem for hobby screwdrivers. ATTENTION: Does NOT fit for Tdi and Td4 2,2l. Scope of delivery: 4 plugs

Kabel mit Stecker für Zigarettenanzünder Suitable for our small mobile parking heater. 4 m cable  Plug for cigarette lighter Please note:  The plug can be loaded up to 16 A. The socket MUST also be rated up to 16 A. 

Mounting panel with switch, double USB socket and 12 V socket.Pre-wired, 12 V socket up to 15 A loadable, USB socket up to 2.1 A loadable. Simple connection with only two cables! Waterproof Dimensions see drawing.

Wiper relay for Land Rover Defender.

Adapter for connecting 2 Alan PL259/6 plugs.

Twin USB 4.2A installation socket, 2x USB, with 2x 2.1 A charge current, protective cover. This socket can bei either fitted directly (dash panel, cubby box, cupboard, etc.) or into a mounting frame (single, double, triple). Please ensure adequate fuse protection! Can also be used in the standard 29 mm cigarette lighter recess as used on many vehicles. Comes with lock nut and cover.

BlueSea voltage indicator with OLED display The compact and practical voltage indicator for 12 V and 24 V systems is equipped with a high-quality OLED display, has reverse polarity protection and is waterproof and dustproof according to IP66 standard.

BlueSea Dual USB built-in socket 4.8A (round) USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12V and 24V on-board voltage and has a splash-proof cover.Delivery without further accessories, if shown, these are for illustration purposes only.

BlueSea Dual USB built-in socket for Carling cut-outs USB socket with 2x 2.4 A charging current, thus also ideally suited for power-hungry devices such as Apple iPad. Devices that support this high charging current are thus charged faster. Devices that do not support this high charging current will not be damaged.The socket is suitable for 12 V and 24 V on-board voltage and has a splash-proof cover.The socket in the form of the well-known Carlingtech Contura switches can be installed individually (please refer to the dimensioned drawing for the exact dimensions), in the Carling installation frames or in various consoles, such as:    on the A-pillar in the Jeep Wrangler JK    in the universal dashboard consoleSupplied without other accessories, if shown these are for illustration purposes only.

Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.

Under-cabinet/on-cabinet holder simple, optionally for 12V socket, USB socket or voltmeter

MIDI strip fuse 125A, 2 pcs. can be used e.g. for our fuse carrier NABS7720 or other holders with MIDI base. With 125 amps this fuse is well-suited for protection of our power distributors , which are both good for a load of 100A amps. Suited for applications of up to 32V.Supplied: 2 pieces

Dual USB Built-in Socket with Cover Hight-quality flush-mounting socket with splash-proof lid, providing 2 USB 2.0 sockets to power mobile devices @ 5 V/2.1 A. Technical details: input voltage: 12 V output volrage: 5 V +-5% max. output current: 2.1 A internal overheat control made form non-corroding material lid protacts against water and dust not suitable for data connections Very well suited to power mordern devices like e.g. Apple iPhone, iPad, smartphones, tablet PC, Garmin GPS, TomTom navigation device, Blackberry, etc. Can either be fitted with or without rectangular base plate. Without, it fits the standard cigarett lighter socket, e.g. on Land Rover Defenders

Mounting bracket to accept the waterproof socket NABS1011 as well as the double USB socket NABS1016, allows the socket to be mounted on top, underneath or behind, incl. fixing material. Scope of delivery: Mounting bracket

12 V socket with rectangualar mounting plate and waterproof cover. Up to 15 A current, locks with the suitable plug NABS1010. 12 V socket, waterproof, 15 A Product features: waterproof cover to prevent water ingress included strain relief for severe humidity and vibratios can be mounted with or without supplied mounting plate large contact area for best power transmission "Twist-Lock" system for secure locking with NABS1010 plug cable-side seal (4 mm diameter) max. voltage: 15 V max. current: 15 A included in delivery: 1 socket

12 V plug, suitable for common cigarette lighters and 12 V sockets, can be loaded up to 10 A, interlocks with the matching socket NABS1011. Product features: Waterproof sealing ring on the shaft to prevent moisture from entering the socket. Status LED Integrated strain relief 10 A fuse built in designed to withstand heavy moisture and vibration "Twist-lock" system for secure locking with the NABS1011 socket outlet Seal at cable outlet (4mm diameter) Max. Voltage: 15 V Max. Current: 10 A Scope of delivery: 1 plug