Adventure 4x4 - Rockslider for Ineos Quartermaster, left and right side, colour: black The ABNTR4X4 Rockslider in black for the INEOS Quartermaster is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the rigidity under lateral loads in off-road use, the elongated holes on the sides are dimpled inwards. It is mounted on the original mounts without drilling. The Rockslider is mounted directly underneath the doors instead of the plastic panelling. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Quartermaster is not changed or impaired. The Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface of drawn studs. Thanks to its shape, the Rockslider also protects against excessive dirt in the field. The dirt picked up can be rinsed out again through openings on the underside. Technical data: Suitable for Quartermaster 25 kg per Rockslider incl. bracket Mounting on original fastening points Delivery: 1 set of Rockslider stainless steel, colour black (left & right) Bracket and fastening material (left & right) Set of galvanised screws Utility model protection: 20 2023 001 190.6 Shipped on a pallet. Registration by individual approval possible.

Modular vehicle panel, for Ineos Grenadier rear side windows, exterior Ineos intended the Grenadier to become the heir to the old Defender in terms of off-road capability and versatility. Many well-designed details show that this was no empty promise by Ineos. The standard airline rails above the rear mudguards, for example, are a feature that every proper 4x4 should have, because real off-roaders or overlanders want to transport important equipment on the outside of the vehicle without having to drill holes or making other destructive modifications. Our modular MOLLE vehicle panels for the Grenadier are very easy to attach to the airline rails mentioned above and the rain gutters via stainless steel brackets. The universal design allows mounting on both the left and right side of the vehicle. Dismantling possible without leaving a trace. The sturdy mount plate made of black powder-coated aluminum enables the safe transport of anything that is MOLLE-compatible and can be attached with straps, clamps or quickfists, for example. The maximum load capacity is 25 kg, roughly equivalent to a 20-liter canister of water or fuel. By the way: The panels are also available in a double pack at a discount price of € 699. All fastening materials are included. Dimensions: 49,5 x 90 cm Max. Load capacity: 25 kg Please note: with some roof racks, there may be problems during installation. The area in front of the grab rail must be free, please check beforehand. CGB-Ineos works 100%.

The Rockslider for the INEOS Grenadier is made of stainless steel in Germany and impresses with its function and striking design. In order to increase the stiffness in the event of a lateral load in off-road use, the lateral slotted holes are turned inwards. Mounting is done on original mounts without drilling.The Rockslider is mounted directly underneath the doors instead of the plastic trim. Due to the high exposed position of the Rockslider, the ramp angle of the INEOS Grenadier is not changed or impaired. Our Rockslider not only serves to protect the bodywork, but also provides a secure footing thanks to its non-slip surface made of drawn nubs. Due to its shape, the Rockslider also protects against excessive dirt in the field. The dirt collected can be rinsed out again through openings on the underside. The Rockslider, as well as the two holders - made in Germany - are powder-coated in black or red and can be ordered in the combination that matches the vehicle. Suitable forUtility 2 & 5-seaterStation Trial & Fieldmaster Technical data:25 kg per Rockslider incl. bracketMounting on original mounting points Delivery:1 set Rockslider stainless steel (left & right)Bracket and mounting material (left & right)Set of stainless steel screws As a useful add-on, there are matching anti-slip pads for the Rockslider.

Side steps available for: Defender 110 & 110 Hard Top - from 2020 Defender 130 - from 2020 Side running boards and door sills, black powder-coated, with anti-slip tape and stainless steel filler plates. Designed for mounting on the existing brackets in the sill.The plastic sill covers need to be slightly modified to gain access to the fixing points. An adapter is supplied for use with the original jack.

Anti-slip pad for Adventure 4x4 Rockslider, 1 pair These self-adhesive anti-slip pads with their precise fit are specially designed for the Adventure 4x4 rock sliders for Defender, Mercedes G and Grenadier. The pads are perfectly matched to the sliders’ hole pattern and they improve the Rocksliders’ good anti-slip properties even further, especially in wet or dirty conditions. The 5.5 x 50 cm adhesive strips are supplied in pairs. The dimensions are matched to the door area, but with sufficient quantity and some adjustments it is also possible to cover the entire surface.

Protective strip kit from TREKFINDER with 5 m long, attractive rubber profile incl. end caps, suitable for cars, lorries, motorhomes, boats and trailers Multifunctional use: PROTECTION: The protective moulding set effectively protects contact surfaces on the vehicle from external mechanical impact. Successfully prevents scratches, dents and minor damage caused by impacts such as parking bumps, shopping trolleys, doors, etc. RETURNS: Existing scratches, paint damage and visual defects can be covered with the mouldings at a later date. OPTICS: The protective moulding set enhances the appearance of your vehicle. The elegant rubber profile, as a discreet application, sets striking accents and makes your vehicle appear more valuable.Material: high quality durable flexible Temperature-resistant UV-resistant high adhesive strength Shape: the curved shape prevents the adhesive tape from being visible, the moulding does not stick out but merges with the bodywork, an invaluable advantage over conventional profiles!!! Easy to fit: The protective moulding is flexible and can be easily cut to the desired length.Remove the backing film from the adhesive strip and press the protective moulding onto the planned body part.Then select the desired shape of the end cap (round or square). Remove the backing film here too and press it onto the end of the protective moulding.DONE :) Scope of delivery: 1 piece 5 m rubber profile 8 end caps 1 cleaning cloth

Grease for steering knuckles - For all Series 1-3, Defender, Discovery and Range Rover models with leaf and coil springs - from 1951 to present day- Lubricates pivots and housing seals, protects balls- Reinforced with solid lubricants, highly resistant to water and salt corrosion- One bottle of grease is required per steering knuckle    

Front bumper for Land Rover Defender 90/110/130(all model years), corresponds to the original bumper from the factory, therefore no registration in the vehicle documents is necessary.   Surface: either black primed or hot-dip galvanized.   Please note:  The bumper is only primed in black and should be painted or powder-coated before fitting, otherwise it will not be corrosion-resistant. 

Spare Wheel Bracket Cover Rear Door New Defender   If you’re driving your New Defender mostly short distance and in city traffic, you will most likely have thought about removing the enormous spare wheel from the cargo hold door. For one, it impedes your all-round view in dense traffic and when you’re parking it makes your already sizable Defender that much longer. So, if you decide to do without your spare wheel, we have an equally elegant and flexible solution for you to cover the wheel mount openings in the rear door. Two perfectly fitted black steel covers - available in smooth or tread plate – are simply screwed into the original mount holes, making your Defender’s rear look like nothing’s missing. Should you need your spare wheel re-installed for longer trips, removing the covers is a matter of minutes. Furthermore, if you wish to paint the covers in your vehicle’s color, it is a perfectly simple job for both paint professionals and DIY enthusiast. The black powder coating serves as a perfect primer layer. Scope of delivery: 2 x aluminium sheets, black powder-coated, available in smooth or corrugated.Fixing material Please note: The screws may only be tightened hand-tight! Max. 5Nm! <iframe width="560" height="315" src="https://www.youtube.com/embed/rhPTpwBGm7k?si=iVsQa9mPYfvMNwZA" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

The Stainless Steel Bolt corresponds to the Land Rover part number ALR5549. With the Stainless Steel Bolts you can mount the NAS Roll Cage to the Defender. Please mind that you need at least approx. 70 Bolts for one Roll Cage. Material: Stainless steel A2-80 high-strengthLength (l): 30 mmDiameter (d): 10 mmTorx-profile: TX50 The black stainless steel screws were coated with a chromium-oxide layer via a computer-controlled electrochemical process. As a result, the stainless steel screws are still protected against rust.

Military bumper with towing jaw, front, suitable for all Land Rover Defender 90/110/130. Delivery incl. bolt and retaining clip. Only conditionally suitable for vehicles with air-conditioning, as the towing eye bolt cannot be pulled out after fitting. Surface: optionally black primed or hot-dip galvanised.

Window grille for Defender 90/110 SW for mounting on the inner lining or door frame, suitable for MOLLE system If you plan to extend your off-road, work, expedition or camper vehicle’s storage capacities, you want to maximize on flexibility, economic use of space and safety. Every trip is different: snow on one day, sand or mud on another. Sometimes you’re out for a weekend, other times it’ll be months on and off the road. Always ready to quickly accommodate widely diverse tasks, a MOLLE-compatible storage system has the additional advantage that it’s never in the way, like chests, boxes or drawers so often are.To provide a great solution for your flexible storage needs, we have developed a perfectly fitting system of interior window grills made from powder-coated aluminum for Defenders 90 SW and 110 SW up to MY 2016. Using the included fastening materials, the grills are simply screwed into the interior trim of the cargo area windows and thereby function as an equally lightweight and sturdy MOLLE grid. MOLLE (MOdular Lightweight Load-carrying Equipment) is a system of bags, pouches, holders, holsters and all kinds of straps and other fasteners that can be tied or clipped into webbings or grids – in this case the window grill – ultimately creating a very flexible, lightweight and secure carrying system for all kinds of gear. In contrast to boxes, shelves or drawers nothing can fall, slide or fly around, you always have quick and easy access and the storage space required is only little more than the size of the equipment itself. It doesn’t get much more efficient than that.In addition, we also offer a wide variety of MOLLE-bags and pouches, MOLLE-compatible emergency and first aid kits, and all kinds of fasteners, from strap sets to quickfist clips for tools and other gear. In combination with the window grids, these accessories let you customize a safe, space-saving and lightweight storage system for all tasks and purposes. Material: Powder-coated aluminum, black. Available window grilles:1 x Rear Window      (Fastening on door frame)2 x Rear Quarter Window   (Fastening to interior trim)2x side window load compartment  (Fastening to interior trim)Mounting material included   Please note:The rear quarter windows are only suitable for Land Rover Defender TD4.MOLLE-bags, quickfists and other accessories depicted in the photos are NOT included in the delivery and must be ordered separately.  

Bumper protection in 3 colours What’s worse than a scratch on your car? Clearly that very first scratch! How annoying is it when you spot one on a pristine new vehicle? Even when 4x4s generally wear their scars with pride, most signs of heavy usage aren’t necessary, they’re frustrating and also depreciate the value of your vehicle. One of the first areas to show signs of wear and tear – especially with off-road vehicles – is usually the cargo area. But if your 4x4 is a New Defender, would you really want to see a worn and scratched rear bumper? Immediate and long-lasting prevention of wear marks on your New Defender’s rear bumper can be achieved with our designated paint protection film. This high-performance product by industry leader 3M protects your New Defender’s rear bumper from scratches and abrasion even when your loading area is constantly in use for work or sports. And don’t forget the damage a dog’s claws can do to the paint when you carry them regularly in a dog box in the back. Due to its multi-layer structure, the 3M wrap also protects the bumper from chipping caused by the impact of small stones or dropped objects. Installing the paint protection film is really easy. Everything you need is included: cleaning cloth, adhesion promoter wipe, squeegee and detailed instructions. If you’ve never done this before: don’t worry. The protective wrap can be positioned exactly as you need it, but if you have to readjust the position a few millimeters that’s no problem either. Simply slide the film into place. It only starts to adhere once you apply pressure with the squeegee. The protective wrap is available in black, anthracite grey or silver, making it a perfect visual match for any New Defender color scheme. Comes in one complete „no worries“ kit: foil, squeegee, cleaner, primer.

Epoxy Primer RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR. Its advanced resin technology improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating. It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.- Can be applied directly over surface rust- Can be applied wet on wet- 1L covers approximately 60 sq feet at 3 MIL- Salt spray resistance test completed at >1000 hours according to ASTM B117 at an independent laboratory

Performance is one thing and, as is well known, there is no mistaking the polyurethane coatings from RAPTOR: Long-lasting UV and rust protection and high resistance to chemicals of all kinds are guaranteed - provided they are used properly. But the RAPTOR look is of course not entirely unimportant. In addition to various textures from smooth to rough, extremely cool color combinations can also be achieved very easily. Our selection of original RAPTOR COLORS is specially tailored to the RAPTOR multi-purpose coating. There are no surprises or trial and error when mixing, using or with the result. The whole work process runs with the usual RAPTOR precision and the typically simple handling: Simply put the contents of a 45ml bag in the 1L bottle of coating, then add the hardener, shake for two minutes and get started. Detailed instructions on how to achieve different textures when spraying are included. Of course, as with any painting job, a color test is recommended. Available in the colors Beige, Light Brown, Sepia Brown, Green, Light Green, Pine Green, Orange and Olive. And another tip: since every RAPTOR COLOR color bag is precisely matched to a bottle of coating in terms of quantity, when ordering larger quantities, it may be cheaper to use our 4-bottle RAPTOR coating kit than with individual bottles. Reduced colors:  Only while stocks last

RAPTOR-LINER black or tintable The 5 liter RAPTOR canisters are perfect for large areas such as trailers, floors, heavy equipment and complete oversprays. - Mix in a ratio of 3: 1 (15 liters of RAPTOR to 5 liters of hardener), so that 20 sprayable liters of RAPTOR are created - sufficient for an area of around 60 m².- Can be applied with a brush or sprayed with pneumatic or conventional HVLP spray equipment.- Suitable for applications in the areas of vehicles, construction, seafaring, leisure, industry, agriculture and trade. The robust and tintable RAPTOR protective coating from U-POL is a two-component coating made of polyurethane, which provides surfaces with a protective layer.Properties:- Durable:Provides a surface that resists mechanical damage and is stain resistant.Protects against rust and corrosion. - UV-resistant:Characterized by high light fastness. - Waterproof:The result is a waterproof surface that keeps moisture away and prevents rust. - Resistant:Resistant to fuels, hydraulic oils, animal urine, salt water and more. - Quick and easy to useSimply fill, shake and spray.Ensures excellent adhesion on various substrates.Can be applied with a protective gun, HVLP gun, roller or brush.Certificates:Fire resistance RAPTOR has passed flammability tests for automobiles using the test methods FMVSS 302, ISO 3795 and BS AU 169A.When used with the RAPTOR additive for slip resistance, a surface is created that meets the ASTM E303-93 standard.Substrates and preparation: - Original paint- Polyester filler- SMC- Aluminum * - Most types of plastic * - Cataphoresis * - Bare metal * - Fiberglass-concrete * - Galvanized surfaces * - Glass fiber reinforced plastic- wood ** Some substrates require one before applying RAPTOR additional surface preparation. 

Rock & Tree Slider Defender Available for Defender 90 and 110 - Please select the appropriate variant.    The item is supplied hot-dip galvanized! Surface treatment with RAPTOR is possible. You can find matching products here. 

Rockslider LAPIS made of aluminum The front panel of this Rockslider is reinforced with "dimple die" beads and the steps can be unscrewed or replaced if necessary.The holes in the Rockslider can, if the running boards are not used, be closed with the screws provided. The connection to the vehicle is via the existing threaded inserts on the underside of the body.For this, the Rockslider is bolted to the body with 6 M10 screws. Delivery: Rockslider left & right mounting hardware 4x tread installation instructions

U-POL RAPTOR - The robust protective coating that also looks good! In contrast to other coatings, the RAPTOR multipurpose coating / painting does not need to be heated. It can simply be sprayed on and then hardens. For a mixture of 1 liter 50ml of paint are required - 1 liter covers an area of ​​approx. 4.2m² - for processing we recommend the standard RAPTOR spray gun, the RAPTOR spray gun with adjustable spray nozzle for better texture adaptation or our roll-on -Set (application via paint roller). To prepare the substrate, we recommend the MIPA Etch primer, the MIPA 1K adhesion promoter, the U-POL universal primer spray, the U-POL etch primer and the 1K plastic adhesion promoter. The Raptor coating can be combined with the RAPTOR epoxy primer or the RAPTOR anti-slip additive. Please note the processing instructions stored under instructions / data sheet. What is RAPTOR protective coating / painting? The RAPTOR protective coating is a particularly robust coating made of polyurethane.This give surfaces an efficient and long-lasting protective layer, which is ideal for demanding conditions. The RAPTOR paintwork was developed in such a way that it can withstand almost any weather condition. The reliable UV resistance does not allow fading or fading - not even after many years in the sun. In addition, it offers the best protection against rust formation - thanks to the waterproof surface! Why the RAPTOR multipurpose coating? + PROTECTION:The coating offers excellent UV protection and, thanks to its ideal seal, protects against rust, corrosion, moisture and extreme temperatures. Resistant to fuels, hydraulic oils, animal urine, salt water, etc. + UNIQUE TEXTURES:You have the option of creating smooth or structured surfaces (e.g. as anti-slip). Metal flakes can be added to give the surface a sheen. + COLOR CHOICE:The multi-purpose coating can be tinted according to the color of your choice or sprayed over with different colors. Scope of delivery: 4x 711 ml bottles coating946 ml hardener  

Nakatanenga Type Q Protective Grille Bundle / Set The Type Q protective grilles for the signal lights on the Land Rover Defender not only enhance the appearance of the vehicle, they also protect the lights from damage during off-road use. The high-quality black powder coating harmonises with other black OEM add-on parts and of course our own products. The grilles are suitable for the original signal lights of the Defender as well as for the LED signal lights we offer.Vehicle type: Land Rover Defender 90/110/130Material: V2A stainless steel 1.4301, glass bead blasted, black powder coated, material thickness 2mmFixing material: not required, the fixing points of the light are usedThe protective grille bundles are available in the following versions:The STANDARD bundle with 4 protective grilles (NASGQ-F4-VAPB) includes:4x protective grilles for turn signal/brake/parking light.The FRONT bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for mudguard indicatorsThe HECK bundle with 6 protective grilles (NASGQ-F6-VAPB) includes:4x protective grilles for turn signal/brake/parking light2x protective grilles for fog/reversing lightThe FRONT bundle with 8 protective grilles (NASGQ-F8-VAPB) includes:4x protective grilles for indicators/brake/parking light2x protective grilles for mudguard indicators2x protective grilles for main headlightsThe FRONT-REAR bundle with 12 protective grilles (NASGQ-F12-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for fog/reversing lightThe FRONT-REAR bundle with 14 protective grilles (NASGQ-F14-VAPB) includes:8x protective grilles for indicators/brake/parking lights2x protective grilles for mudguard indicators2x protective grilles for main headlights2x protective grilles for fog/reversing light

Chequer plate bumper pads  For Land Rover Defender, protects the bumper and provides a secure hold. Delivery in pairs, incl. rivets Material: Aluminium Material thickness: 2.5 mm base thickness / 4 mm incl chequer plate (quintet plate)

The best investment in the value retention of your vehicle is a treatment with the proven Mike Sanders anti-corrosion grease and TimeMAX underbody protection - here at a flat rate for the Jeep Wrangler JK and Jeep Wrangler Unlimited JK (from model year 2007).   The flat rate applies to vehicles in new or as-new condition without heavy soiling/rust. If more work is required (rust removal/cleaning), this will be charged at cost. We can only give an exact price after inspecting the vehicle - but the Mike Sanders treatment is particularly worthwhile for older vehicles with rust - the rusting process is stopped as the oxygen required for this no longer reaches the affected parts.   The flat rate includes a visual inspection using an endoscope before and after the treatment.   Please select the wheelbase of your vehicle.   When ordering, please include your telephone number for the necessary appointment. Fitting is only possible on site in Berg near Neumarkt (postcode: 92348).  

Dirt D-Fenders extend the wheel arch of Land Rover Defender 90 / 110 / 130 and act as a splash guard. Available in different finishes. Dirt D-Fenders close the gap between the bottom of the wheelarch and the mudflap, protecting your Defender against dirt and damage to the paint. Supplied in pairs and come with fitting kit. Dirt D-Fenders can't be used on vehicles fitted with rock sliders. They have not been designed to work with chequerplate sills, but can be modified to fit. Dirt D-Fenders are available in smooth (ideal for painting) or textured finish. 

Nakatanenga heavy duty mudflaps for Land Rover Defender 90/110/130, set containing 2 pieces. Our mudflaps are available for either front or rear axle fitting. Our mudflaps are made of HDPE (high-density polyethylene) and are very durable with less danger of ripping them off when reversing. Can be fitted to the front with the original mountings or our heavy duty mudflap mountings. At the rear the original mountings are used.

Nakatanenga chequer plate rear cross member for Land Rover Defender Cover made of aluminium chequer plate for the rear cross member on Land Rover Defender 90/110 up to MY2016, plate thickness: 3 mm. The openings for the jacking point are pre-drilled, all other openings are not desired or required by all customers and must be fitted by the customer. The article is optionally available in anodised aluminium, black powder-coated or in RAL colour of your choice, please select the desired variant. Material thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Chequer plate for bonnet for Defender Td4, 4-piece Finally available for the Land Rover Defender Td4 from MY07: Chequer plate for the new bonnet.Four-piece version, available in different colours/surfaces:-    anodised-    black powder-coated-    powder-coated in desired colourDelivery incl. rivetsMaterial thickness: 2.5 mm basic thickness / 4 mm incl. checker (quintet sheet)

Chequer plate wing top protection for all Land Rover Defender MY 2007-2016, CLASSIC Chequer plate wing top protection for all Land Rover Defender TD4 / Puma 90/110/130 MY 2007-2016. Made of 3 mm aluminum either anodized or with additional powder coating (all RAL colours). Supplied in pair with rivets. CLASSIC version. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer. Please note: the protective covers for Defender MY 2007-2016 are slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer

Abenteuer4x4 - Rockslider - for Land Rover Defender The stainless steel Rockslider by Abenteuer 4x4 for the Land Rover Defender 90/110/130CC convince by a completely new design, low weight (approx. 12 kg/piece) and an easy mounting without drilling.To increase rigidity, two webs are welded on the back and the slotted holes on the long side are turned inwards.The Rocksliders not only serve to protect the bodywork, but also provide a secure foothold thanks to their non-slip surface made of drawn knobs, and their shape also protects against excessive dirt in the field. There are several openings on the underside for rinsing out dirt that has been picked up.The Rocksliders - made in Germany - are powder-coated black. Delivery includes fixing material.This item is bulky goods.Material: stainless steel, black powder coatedMaterial thickness: 3mm Delivery: 1 set Rockslider stainless steel (left & right)Bracket and fixing materialSet of screws stainless steel As a useful add-on, there are matching anti-slip pads for the Rockslider.You can find a suitable crossbar here.

Running board round tube for Land Rover Defender, stainless steel The round tube running boards serve as an entry aid and vehicle protection. They are made of stainless steel and have an aluminium tread surface with rubber pads to minimise the risk of slipping.The running boards are available for various wheelbases, delivered in pairs, optionally in stainless steel look or with additional black powder coating. Please select below.Delivery is in pairs.The running boards are at the original height (i.e. at the same height as the original Land Rover running boards) and therefore under the bodywork.You can find a suitable crossbar here.

Underride protection, 6mm aluminium, high-strength alloy, ALL Land Rover Defender Underride protection suitable for all Land Rover Defender from 1983 until today.    Skid plate 6 mm aluminium, high-strength alloy, weatherproof, galvanised and additionally black powder-coated on request.    Side parts 5 mm steel, electrogalvanised and black passivated (CrVI-free), optionally additionally black powder-coated    Integrated recovery eyes (22.5 mm diameter)    The underride guard is attached to the original mounting points using the vehicle's original bolts. All other installation material is included.Passivation is the spontaneous formation (aluminium, nickel, titanium...) or targeted creation of a protective layer on a metallic material, which prevents or greatly slows down the corrosion of the base material.

Discovery 3 / 4 / and Range Rover Sport winch attachment kit The inconspicuous winch attachment kit enables the practically invisible installation of a common, compact winch behind the original bumper of the Land Rover Discovery III , Discovery IV or Range Rover Sport. The advantages compared to a classic mounting solution (steel bumper in vehicle width) are obvious: visually inconspicuous lower risk of theft and vandalism better protection against environmental conditions less changes to the driving characteristics due to the low weight only minor modifications to the bumper are necessary, no complete reconstruction of the front end no registration in the vehicle documents necessary The front bumper has to be adapted minimally, for this you will receive instructions. The winch window and cable shown are not included in the price, please note our corresponding bundle offer! Please select the engine version of your vehicle.

Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to MY 2006 Chequer plate wing top protection for all Land Rover Defender 90/110/130 up to model year 2006. Made of 3 mm aluminum either anodized or with additional powder coating (all RAL colours). Supplied in pair with rivets. These chequer plates are rounded at the front and side to follow the shape of the front wing. For vehicles up to MY 2006 the protection plates include the antenna, for later models, the plates are shorther. Please submit RAL colour when ordering special finish in comment box. Please note that shipping might take slightly longer.Please note: the protective covers for Defender form MY 2007 er slightly shorter than for previous models, they do not reach up to the antenna mounting as production tolerances are too great. It is therefore not necessary to cut an antenna hole. In the CLASSIC version the air intake cover is mounted inside the chequer plate, in the non-classic version this is mounted on top of the plate. Please choose desired design. Material thickness: 2.5 mm basic thickness / 4 mm incl. chequer