Snow chains König T2 220 / Thule XB-16 for 4x4 and SUV, size 220 Product features 16 mm chain link thickness Manual tensioning system: one stop to attach and one stop to tension the chain Closed shortening hooks prevent the chain from twisting Suitable for the following wheel/tyre combinations: 6.7-14, 195/75R-14, 195/80R-14, 185/80R-15, 195/70R-15, 205/65R-15, 175/75R-16, 175/80R-16, 195/65R-16 The Thule snow chain range no longer belongs to the Thule Group but to the König company. The chain models that were previously sold under the Thule brand are now offered under the König brand. You will therefore receive snow chains from either Thule or König.

Bag for UUNI 3 Pizza Oven Custom-made protective cover for the Uuni 3 pizza oven Also doubles as a carrying bag Weatherproof Only on order Your Uuni oven made of brushed stainless steel is rust-resistant and will serve you well for many years. But if you want it to look like new for longer, you can cover it with the tailor-made protective cover. It has been thoroughly tested in Scottish gardens and protects your Uuni 3 from careless birds, leaves and all kinds of freak weather. Because outdoor cooking is so fun and practical with your Uuni, you may want to take it with you on vacation or on an excursion. Turn the protective cover over, stow away the funnel and snap it off, then put the entire oven in your pocket and you can enjoy a different view while cooking outdoors. Please note: Let your Uuni 3 wood-burning stove cool down completely before covering, or moving it.

Dutch Oven camping set, including cookery book The Dutch Oven, often referred to simply as a pot (sic), is available here together with a sturdy tripod, a pot stand, a lid lifter and a book.Although the pot itself is available in three sizes, we only offer the two more popular sizes as a set. The pots are particularly suitable for induction hobs, but also for all other types (ceramic, open fire, etc.). Please select the desired size.Here you will receive a practical starter pack with our Dutch Oven Set together with the book ‘The Little Dutch Oven Book’. Please select the desired size.Scope of delivery:  1 x Dutch Oven with lid (either 4.5 or 8.5 quart) 1 x tripod 1 x lid lifter 1 x pot stand 1 x book ‘The little Dutch Oven book’ Further information: Our Dutch Ovens can be used over an open fire, on the barbecue, on the hob and also in the kitchen oven. We have deliberately opted for pots without feet, as these can be stored in a more space-saving way and can also be used in the normal kitchen. Our pots are already baked so that you can prepare delicious food straight away.  

Versatile butterfly closure made of stainless steel. It is a sturdy lock with a snap and turn mechanism.This rotary closure is ideally suited for e.g. for DIY projects, transport boxes and much more. The hinged wing is flat and easy to operate. Due to the special construction, the boxes are well protected against accidental opening. Available in a set of 2, 5 or 10 pieces Basic information: not spring loaded stainless steel lockable without shell

Dutch Oven The Dutch Oven, often referred to simply as a pot (sic), is available here together with a sturdy tripod, a pot stand and, of course, a lid lifter. Although the pot itself is available in three sizes, we only offer it as a set in the two most popular sizes. Of course, the tripod, the lid lifter and the pot stand can also be used with the pound pot (coincidentally also the name of a very popular Dutch Oven dish - but here we mean our 12-quart pot). The pots are also particularly suitable for induction cookers, as well as for all other types (ceramic, open fire, etc.). Please select the desired size.A practical tip from Harry:Tried and tested for travelling: one of the two sets offered here! You can also attach one of these beautiful enamelled percolators to the tripod for making coffee. But be careful! Not all percolators are suitable for this type of coffee preparation! And... the handle can get devilishly hot! Our lid lifter doesn't really help here either. But if anyone knows of a practical way of using the Dutch oven lid lifter with a percolator, please let me knowWhere were we again? Exactly! With our DO sets... ideal for travelling, but probably a little undersized for a garden party. So in itself it's perfectly adequate for a garden party, but not for a G-A-R-T-E-N-P-A-R-T-Y!That's when you need our pound pot - and to supplement and round off the food base, you can always find a quick use for the smaller brother. And if you want to serve the much-quoted icing on the cake as a first aid against second hunger late at night: Take a piece of beef of your choice, it should be around 300-400 grams and nicely marbled, and it must be able to fit into the sizzle pan later (a flank steak is really tasty, but completely unsuitable for this), and put it in the oven set to around 55°C, but not immediately taken out of the fridge - preheating is superfluous, unless your G-A-R-T-E-N-P-A-R-T-Y is taking place in the Arctic Circle.There, in the oven, it can then remain for a long, really long time, but of course not until the end of time. So don't overdo it! And the following really does apply to this preparation: don't add salt! Garlic, thyme and/or rosemary add a familiar flavour, sage and coriander a less familiar but very interesting one. When your guests' appetite for a savoury or tasty treat reawakens, simply let the Sizzel Pan heat up in the embers and then place the meat inside. 45-60 seconds per side is usually sufficient and a knob of good butter should not be missing. Allow the meat to rest for a few more minutes, then cut into slices and serve,  then cut into slices and serve sprinkled with salt (flakes!) and freshly ground pepper. Make sure you try it: Lemon pepper!   Further information:  Our Dutch ovens can be used over an open fire, on the barbecue, on the hob and also in the kitchen oven. We have deliberately opted for pots without legs, as these can be stored in a more space-saving way and can also be used in the normal kitchen. Our pots are already baked so that you can prepare delicious food straight away.           

The WP-24 hands-free system enables the Albrecht CB radios AE 6490 CT or AE 6491 CT to be used without having to take your hands off the steering wheel. The remote control can easily be mounted on the steering wheel and has a range of up to 7 meters. All you have to do is attach the supplied microphone near the driver (e.g. sun visor) and connect the receiver to the microphone socket of the radio, and you can start radio.The remote control can still be used to select the channels and switch ASQ on / off.The microphone sensitivity can be continuously adjusted according to the distance. From 2020, the legislature will stipulate that car and truck drivers who want to radio at the wheel must use a hands-free device for safety reasons. With an AE 6490/91 and the WP 24, Albrecht already offers a future-proof solution. Properties:- Channel selection and ASQ via remote control- Microphone sensitivity continuously adjustable- LED status display Scope of delivery:WP24 remote control incl. CR2032 battery, receiver, external microphone, steering wheel bracket, mounting screws

The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.

Extension for Evolution Awning / Blind This extension is made from the same high-quality material like the Nakatanenga Evolution Awning / blind and gives ideal side sun, sight and wind protection. The extension is simply fitted to the existing welt track / c profile of the awning. With a diameter of 6.5 mm the welt fits to a number of awnings on the market. The extension can be secured to the ground with supplied pegs and cords. The full length of the extension is 200 cm. Surface area: 200 x 140/200/250/300 cmmaterial: 280 g/sqm rip-stop Polycotton, PU coated; water and dirt repellent; due to the relatively heavy quality reduced wind noise Attention: The extension can’t be used at the same time with the awning for the blind as both use the same c-profile for attachment. The awning is not included in delivery! Please order it separately here (200 cm, 250 cm, 300 cm) or here (140 cm). If you want to erect the extension as shown in the 4th image, you can order an additional pair of pegs.

Roof Lodge Evolution Front Extension Arc Shape for Car Awning (Bag Awning). The extension is made from the same high quality material as the Roof Lodge Evolution canopy / awning and provides ideal sun, privacy and wind protection. The extension is simply pulled into the existing keder rail of the awning. The extension has a keder diameter of 6.5 mm and is therefore also suitable for many other awnings. The corners of the extension can be fixed to the ground with the pegs and ropes included in the delivery. The extended length of the extensions is always 200 cm, regardless of the width. Compared to standard awning extensions, this extension has a small curve at the outer end, so that the extension has ideal tension when stretched. This means that it flutters less and withstands stronger winds better. It can be tensioned at an angle or vertically! With an extension that reaches all the way to the ground, you usually feel quite isolated from the surroundings. No wonder, because a completely pulled-down side almost looks like an incomplete awning, but without offering the advantages of an awning. The awning front extensions are available in the following widths: 140, 200, 250 and 270 cm. The length is always 200 cm for all of them Material:280 gsm RipStop polycotton (65% polyester / 35% cotton), PU-coated; water and dirt repellent; significantly less fluttering noise due to the comparatively heavy quality. Attention:The extension cannot be attached at the same time as the awning awning, as both are attached to the same keder rail. Scope of delivery: 1 piece awning extension in the shape of an arch 2 pieces of cords 2 pegs The awning is not included in the scope of delivery! The additional telescopic poles, which can be seen in some pictures, are not included in the scope of delivery of the extension, but are optionally available. Important note: As a subsequent delivery of the materials for this product requires a lot of time, please request the desired item by e-mail if you are interested.    

Versatile lever lock made of stainless steel.This closure is ideally suited e.g. for DIY projects, transport boxes and much more. Due to the quick and easy assembly, this closure is the absolute all-rounder. The robust lever lock is equipped with lock and matching key. Available in a set of 2, 5 or 10 pieces Basic information: spring-loaded stainless steel lockable

Plastic sand ladder - starting aids for up to 3.5 tons The perfect traction help for all vehicles whether in the snow, sand or mud. Ideal for trips into the terrain. The super light plastic alternative to aluminum sand sheets. For vehicles up to 3.5 tons Plastic sand sheets: 1070 x 310 x 60 mm Delivery in pairs - the starting aids are stackable (dimensions approx. 1070 x 310 x 100 mm) Please do not use these sand sheets: on hard / stony terrain, as a bridge / ramp, below temperatures of -20 ° Celsius Available in: black You can find the right holder for your Maximum Traction bumpers for the CargoBear here in the store. 

Top sun visor organizer set Where to go with all the little things in the vehicle? Here there is more storage space in a double pack! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle.The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, pens, notepad, small flashlight, multitool etc. The Organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Width of the organizer is 290 mm.Material: 100% nylon The Nakatanenga sun visor organizer is available in the following colors: green-brown coyote sand Universally applicable for all vehicles! The mirror & patch are not included. *compared to single purchase

NOLDEN 7-inch Generation 2 Bi-LED headlights for Toyota LandCruiser HZJ NOLDEN 7" Bi-LED Generation 2 main headlight kit with two headlamps with low-/high-beam and insulating strip for Toyota HZJ. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Toyota HZJ / "Buschtaxi". Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, Jeep Wrangler JK/TJ/CJ, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

NOLDEN 7-inch Generation 2 Bi-LED reflector headlights for VW T3 NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and adaptor for Mercedes G. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Mercedes G Wagon. Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, various Toyota, Jeep Wrangler JK/TJ/CJ, etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39W compared to 55/60W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32W / 39W voltage range: 9-32V lumens calculated: 1880lm / 2400lm lumens measured: 1550lm / 1700lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version. You get one complete set for your vehicle.

NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price for one lamp! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights.  Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1.880 lm / 2.400 lm lumens measured: 1.550 lm / 1.700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

NOLDEN 7" Bi-LED main headlights Generation 2 for Land Rover Defender NOLDEN 7" Bi-LED main headlight kit Generation 2 with two headlamps with low-/high-beam and position light, including stainless steels bezels. Price advantage! Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Land Rover Defender 90/110/130. Price per pair! Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Jeep Wrangler JK/TJ/CJ, various Toyota, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Update: for a nicer look, the headlights are now also available in full black (Stealth Edition)! Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Available in chrome, dark chrome, matt black and full black Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1880 lm / 2400 lm lumens measured: 1550 lm / 1700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. Also note our lower-price vehicle-dependent bundles for Jeep Wrangler JK, Mercedes G and Toyota LandCruiser HZJ. Please note that these lights have position lights. You can use the standard Defender position lights along with the headlight position lights, or you disconnect the position light of the NOLDEN lamps. You receive a complete fitting kit, including two lamps and fitting material for your vehicle. The Nolden LED lights are available in chrome, dark-chrome and matt black, the stainless steel bezels either in "stainless" or black powder coating. These lights are also available for RHD verhicles. Please choose the desired version. IMPORTANT: We do not ship the right-hand drive / left-hand traffic versions to UK.UK customers please visit www.4x4overlander.com for the RHD/LHT headlights.

NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and insulating strip for Toyota HZJ. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Toyota HZJ / "Buschtaxi". Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, Jeep Wrangler JK/TJ/CJ, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39 W compared to 55/60 W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights. Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32 W / 39 W voltage range: 9-32 V lumens calculated: 1,880 lm / 2,400 lm lumens measured: 1,550 lm / 1,700 lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480 h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version.

NOLDEN 7" Bi-LED main headlight kit with two headlamps with low-/high-beam and insulating strip for Toyota HZJ. Available in different colours. Innovative 7" LED main headlight with proven reflector technology combines low- and hight-beam as well as position light in one lamp. Original dimensions and standard H4 socket mean that this is an easy to fit, durable replacement upgrade for any Toyota HZJ / "Buschtaxi". Also fits (in some cases with additional apaptors or wiring looms) other vehicles, like Land Rover Defender, Jeep Wrangler JK/TJ/CJ, Mercedes G etc. The integrated electronic driver / control unit makes for easy fitment. NOLDEN headlights are road legal, of course. They have ECE (also known as E-marked) and SAE approval and are available for either LHD (EU version) or RHD (UK version) vehicles. You can choose between light-crome and darker dark-crome looks. Compared to traditional halogen headlights LED lights offer many advantages: higher light output ("more light") more comfortable light ("white light"), closer to sunlight low energy consumption (32/39W compared to 55/60W low/high-beam) vibration and shock proof design (especially important for diesel cars or off-road use) never again (ca. 30.000 hrs lifetime) white road Illumination compatible with HID/Xenon one of the brightest LED high and low beam 7“ headlights available Many users of classical vehicles, especially off-road vehicles (Defender, Wrangler, G-Wagon) have been looking for modern headlights with classical looks. Up to now 7“ LED headlights had offered better illumination than halogen headlights, yet they didn't give optimum illumination or were of inferior design. In addition these were often retrofitting solutions that didn't meet OEM specifications. The new NCC 7“ Bi-LED headlight was especially tailored to meet the OEM requirements. All components, from the LED to the plug, are designed and produced accordingly making up a perfect overall system. The design of the 7“ Bi-LED headlights reminds more of a conventional halogen headlight that looks like the well-known classic design. The familiar appearance of the vehicle is thus not changed much and essentially still looks like “OE“. The illumination level of the new NCC 7“ Bi-LED headlight is equally good as that of a Xenon headlight. However, the new NOLDEN headlight system has the big advantage of a lower current consumption, which increases the life of the system significantly thus noticeably lowering the operating costs. In a normal case it can be expected that the life of the NCC 7“ Bi-LED headlight is much longer than that of the vehicle. The ligths don't require headlight adjustment or the headlight cleaning system of the Xenon system, retrofitting with the new NCC 7“ Bi-LED headlight is therefore much easier, faster and in the end less expensive than is the case with the Xenon headlights.   Technical details: dimensions in mm: 177 x 152 number of LED: 5 x Osram Automotive output (low-/high-beam): 32W / 39W voltage range: 9-32V lumens calculated: 1880lm / 2400lm lumens measured: 1550lm / 1700lm fixing: PAR56 homologation: ECE, SAE front lens: UV resistent polycarbonate hard coated front lens housing: lightweight, rigid alumium housing waterproof: 480h salt spray tested and fully water proof to IP6K9K NOLDEN Bi-LED main headlights are also suitable and approved for many European, Asian and American motorbikes. The Nolden LED lights are available in chrome, dark-chrome and matt black and also for RHD vehicles. Please choose the desired version.

OptiMATE solar kit, panels with intelligent charge/monitoring controller. The highly effective solar charger (solar impulse charging system), with which even deeply discharged batteries can still be saved and protected. It guarantees safe and intelligent charging, as the OptiMATE solar battery charging system independently switches between continuous charging or pulse charging depending on the sunshine. OptiMATE analyses the state of the battery the next day and optionally continues charging or - in the case of a defective battery - optimisation. Safe long-term maintenance without the risk of overcharging. Automatic shutdown in the event of a short circuit or as soon as the battery is disconnected. Excellent safety for battery and vehicle electronics Easy monitoring of the battery status with the help of the monitor display, which updates itself every 3 seconds. (current consumption < 0.5 mA). With this battery charging system you get an all-round package, mobile, portable, intelligent. The system is suitable for standard, AGM, LFP and gel batteries. It is supplied with battery terminals and ring eye connections and with German instructions. The solar systems are manufactured to a high standard in South Africa (made in South Africa). Product Information Solar Panels - Solar Charger Info about the solar panels: Power: 40 watts (max.)60 Watt (max.)80 watts (max.) Voltage: 12 V nominal, 22 V maximum Possible uses: Outdoor/indoor Design: High-quality aluminium frame (weatherproof) with 4 mounting brackets, output cable 200 cm with SAE connector Info about the OptiMATE charging/monitoring controller: Charging current:  3.3 A from 40 W panel (max. average current), 3-5 A pulse current. 5 A from 60 W panel (max. average current), 3-5 A pulse current 6.67 A from 80 W panel (max. average current), 3-5 A pulse current Usage: Indoor/outdoor (lowest temperature: -20 °C. Economy mode: start with low 1 V voltage Suitable for: STD, AGM and GEL 12 V batteries with 2 - 240 Ah. Input: 15 - 22 V Design: Weatherproof charge controller housing with mounting holes and loops (for Velcro or Ziptie). SAE input connector for solar panel and output cable of 100 cm to be connected to the battery with the supplied weatherproof battery cable and standard battery clamp set. Dimensions (corner brackets included): 40 watt panel: width: 42.9 cm / 16 7/8 " height: 68.6 cm / 27 " depth: 3.3 cm / 1 1/4 "60 Watt panel: Width: 65.9 cm / 16 7/8 " Height: 68.6 cm / 27 " Depth: 3.3 cm / 1 1/4 "80 Watt panel: Width: 68.5 cm / 27 " Height: 78.1 cm / 30 3/4 " Depth: 3.3 cm / 1 1/4 " Optimum safety: there is no risk of overcharging. Completely safe for vehicle electronics. Spark suppression. Safe for long-term battery maintenance. Automatic cut-off in case of short circuit or disconnected battery. The panels are supplied with a 3 m cable as standard. A suitable extension cable can be found here. Additionally included in delivery are: suitable carrying bag adjustable stand (fixed to the panel) The panel is ideally suited for our parking heater, for example. Please note: When using the panel for a cool box, a buffer is necessary, as the starting current is too high.  Made in South Africa https://www.youtube.com/user/TecMate1/about  <iframe width="560" height="315" src="https://www.youtube.com/embed/lYjy11Jk6JU" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Battery box with various connections, with solar panel Optionally with AGM or LiFePo battery In the 21st Century modern technology is everywhere, even off-road and off the grid, but more often than not there is no power when you're out and about on some trail in some country. One option is the classic cigarret-lighter as a power source, but in using this frequently you risk decharging your battery to a point where it won't start your car anymore. Another option would be a generator, but those are loud, impractical and noisy. To solve this probem highly portable powerbanks were invented, but for a multiple day long trip a small powerbank just won't cut it. So, what if you had a lagre but portable power bank? One you could simply charge, even off the grid, maybe with a solar panel? And one that is heavy dut enough to endure week long trips and years of use ?  Hold on, that's exactly what we did! This compact, but long-lasting Powerstation (33Ah) offers a cigaret lighter-output and two USB-ports (5V - 2.1A), in a roubust shell. It can simply be charged using our solar panels by Optimate. LiFePo4 batteries – with their lithium iron phosphate cathode material – are perfect for running your camping or work utilities on the road, especially in conjunction with our mobile battery boxes. Unlike your conventional AGM lead-acid technology, the lithium battery combines vastly superior charging/discharging qualities with extremely low weight and small volume, respectively, and a long service life. LiFePo4 batteries tolerate deep discharging without problems, unlike AGM batteries which will suffer irreparable damage when repeatedly discharged beyond 50%. Unless you require the greater tolerance for extreme cold in AGM’s, you should definitely consider the higher initial costs of LiFePo4 batteries and compatible chargers. Enormous weight and space reductions, the long life-cycle and the hassle-free charging and discharging of the battery are strong arguments for the investment. And last but not least: LiFePo4-technology is extremely safe. robust shell portable design comfortable handle 20 A car-fuse 33 Ah (396Wh) AGM brand battery optionally 35 Ah LiFePo battery 2x USB-plug (out) 1x cigaret-lighter (out) 1x SAE junction box for charger (charger not included) (in) 1x On-/Off-switch  simply plug in and off you go Scope of delivery: 1 x Optimate solar panels in a choice of 40, 60 and 80 watts, including bag and stand.1 x Optimate charge/monitor controller, including weatherproof battery cable1 x Nakatanenga battery box selectable in 4 colours, with different connections

Where to go with all the little things in the vehicle? There is more storage space here! With this sun visor organizer, you create additional storage space for many small things that are otherwise unfounded in your vehicle. The usability of the sun visor and the field of vision of the driver are not limited. Important utensils are always directly accessible with this sun visor organizer:Super practical e.g. for belt cutters, glasses, sunglasses, ballpoint pens, notepad, small flashlight, multitool etc. The organizer is easily attached with Velcro straps and can be just as easily and quickly removed. Integrated zipped pocket and MOLLE loops. Width of the organizer is 290 mm. Material: 100% nylon The Nakatanenga sun visor organizer is available in different colors: green-brown coyote sand Universally applicable for all vehicles! You can find the Nakatanenga card holder here. You can find the matching mirror for the organizer here.

With the Synco Lube® Sportsman's Kit, your sports equipment works reliably and smoothly. The high-quality, synthetic lubricants with Syncolon® (PTFE) are tailored to the needs of many sports such as hunting and fishing. The lubricants penetrate quickly, thereby extending the life of your equipment. and are anti-corrosive, impermeable to salt water and fresh water. Typical applications:Crankshaft, thumb buttons, ball bearings, brake, hammer / firing pin, drums / cylinder, slide, rail system,Rifle barrel and stock, hand cock / safety rifle, etc. - loading mechanism and shutter, trigger mechanism,Compound bows / crossbows - cams / cam wheels, pulleys, rails, and sleds Fishing reels (bait and spin fishing) - spool shaft, backstop, Characteristics:Reduces friction3-4 times more durable than conventional lubricantsStable viscosityWater repellent - prevents rust and corrosionExcellent performance at both low and high temperaturesNSF classification H1

High quality wood pellets for firing the UUNI 3 wood stove Properties:6 mm diameter100% beechAsh content: = 0.7%Moisture content: <10Calorific value: 4.8 KWh / kg

Vision-X Explorer Xtreme Prime LED worklight If the question is for a lot of light in a compact design, the Explorer Xtreme Prime range is the answer - in square 4" design or classic 6" round design, a single spotlight emits up to 5,423 lumens - or less if required, as they are adjustable via an optiional dimmer. Depending on the lighting requirements, there is a choice of 9 (square design) or 11 (round design) LEDs, as well as 10°/25°/40°/60° or 30/65° illumination. In the NACTL-EPX-910 version (i.e. 4" square with 10° illumination), the Explorer Xtreme Prime has an E-mark when used in pairs as a driving lamp.Product features:     robust die-cast aluminium housing    scratch-resistant polycarbonate lens    105° adjustable bracket    Vertically arranged ribs for optimised heat dissipation    low power consumption (only 45 or 55 watts)    waterproof according to IP68 standard    9-32V multi-voltage capability    Integrated thermal management    Prime Drive technology adjustable via optional dimmerTechnical data:Article number Number of LEDs Lumen Illumination Dimensions Power consumptionNACTL-EPX-910, with E-mark 9 4,437 lm 10° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-925 9 4,437 lm 25° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-940 9 4,437 lm 40° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-960 9 4,437 lm 60° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-93065 9 4,437 lm 30/65° 150x147x79 mm 3.75 A / 12 VNACTL-EPX-1110 11 5,916 lm 10° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1125 11 5,916 lm 25° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1140 11 5,916 lm 40° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-1160 11 5,916 lm 60° 182x174x81 mm 4.6 A / 12 VNACTL-EPX-113065 11 5,916 lm 30/65° 182x174x81 mm 4.6 A / 12 V The price refers to one piece. For operation according to StVZO, two copies of the NACTL-EPX-910 must be installed. Please select the desired configuration.