Spare parts kit for mobile parking heaters. To ensure that your parking heater remains watertight, you will receive the common wear parts here. Set consists of: 3x rubber plugs 2x O-rings 2x thread caps 1x storage bag

A handy rescue tool just in case: This pocket-sized SOS card is the most effective way to be prepared for emergencies. The handy size ensures that this helper fits into any wallet. Always at hand when needed. In addition, the printed Morse codes SOS and HELP are very useful. The multifunction tool consists of:     4 wrenches     4 stripping blades     1 (emergency) cord     1 can opener     1 bottle opener     1 screwdriver head     1 knife blade     1 inclinometer *Only while supplies last

27 LED Tent Light Starter Kit, 155 lumens, length: 30cm Operation with 12 V via plug or with 230 V with adapter (both included) 30 LEDs on a rigid, 30 cm long light strip for a light output of 155 lumens Includes clips, adhesive pads and adhesive tape for mounting 2 m cable for flexible positioning.

he 3D mattress pads are ideal for roof tents and other applications. These so-called spacer fabrics are ideally suited for rear ventilation of mattresses in roof tents, campers and on yachts. "Floating like on clouds" takes on a new meaning with these high-distance structures. The mat is placed between the mattress and the attic tent floor and contributes to a healthy and restful sleep thanks to its climate regulation. The mattress pads have matching cutouts for the tent poles on both sides. Thickness: 10 mmWidth: ideal for our Roof Lodge roof tents 140/165 and for other 140 cm and 165 cm wide roof tentsLength: 230 cmMaterial: 100% polyester Note: If necessary, the documents can be cut with any good household scissors. The optimal ventilation of the mattress base made of 3D fabric works like an invisible air conditioning system. Around 1 million upright PE threads per square meter allow moisture to escape ideally before it leads to waterlogging, mold stains or the formation of mold. Due to the excellent air and load distribution of the 3D fabric, the mattress base adapts to every contour, which significantly increases comfort. Please select the appropriate width.  

Sensationally cheap These are the same material as our mattress pads for the roof tents. This so-called spacer fabric is optimally suited for ventilating mattresses and is therefore particularly well suited to where the air has to circulate. The 1 million upright PE threads per square meter also guarantee excellent load distribution. The 3D fabric adapts perfectly, which significantly increases comfort. Due to the cushioning and cushioning effect, the material is ideally suited for conversions on mobile homes and the like. Thickness: 10 mmWidth: 26 cm / 30 cm - please choose the desired versionLength: 1 meter - a maximum of 5 meters is possible in one pieceMaterial: 100% polyester Note: The 3D mesh can be cut with any good household pair of scissors, and can also be easily sewn into larger surfaces by hand or sewing machine with a strong thread. Normally you will get up to 5 m at a time. For special blank requests, please contact us in advance (meter by meter). The 3D mesh material is available in 26 cm and 30 cm width - delivery in whole meters. 9€ / m²

Nakatanenga barbecue skewer set Barbecuing is definitely the oldest and easiest way to prepare food - many would say it's still the best! We share this opinion and that's why with our 6-piece Nakatanenga barbecue skewer set you have everything you need to roast meat and other delicacies on the campfire, barbecue grill or even the open fire. It couldn't be easier! Our skewers are made of stainless steel and are extra wide, just as they are traditionally used for shish kebabs from the Balkans to India. In addition to whole pieces of meat, their wide shape makes them particularly suitable for minced meat kebabs. The meat holds better on the wide skewer and does not fall apart when turned over. With a length of 60 cm and 6 skewers, larger groups can also be easily catered for. The barbecue skewers have a grip hole at the end and are also twisted twice. This not only ensures a good grip on the surface, but also allows hot gravy to drip off before it burns or sticks to your fingers. A clean affair, especially thanks to our high-quality and easy-to-clean bag made of 100 % nylon with Velcro fastener. By the way: If you are also looking for a perfect and mobile fire pit to go with the skewers, you should take a look at our collapsible fire bowl with grill grate. Bag dimensions LxW: 61 x 11.5 cm Complete weight: 493 g Material: Stainless steel   Scope of delivery: 6 barbecue skewers 1 transport bag    

- can be used with 12 volts (plug) or 230 volts (mains adapter), both supplied - 90 LEDs on a flexible, 90 cm long light strip with an output of 294 lumens - comes with clips, sticky pads and tape for attachment - 2 metres long cord for flexible mounting

Activated carbon fan kit for mini dry separation toilet KoMa Kackbox.USB fan kit with activated carbon filter and drilling template (not mounted) Mounting template included Fan with USB connection and switch for 2 speeds 1 set of activated carbon filters4 stainless steel screws and nuts1 cutting template1 paper bag The mini dry separation toilet poop box from KoMa you can find here. You can find replacement filters here. For hygienic reasons, this item is generally excluded from return.

Activated carbon filter mat, 12mm thick, set of 4 Replacement filter mats for the activated carbon fan kit of the dry separation toilet poop box. Scope of delivery: 4 pcs filters

End piece for warm air hose WALUFLEX Our 60 mm Flexi pipes for parking heaters are the perfect solution for transporting warmth and cosiness from A to B, whereby B can be one of our roof tents, a cold mountain hut or whatever else needs to be heated off-grid. The warm air pipes can be cut to any length and to ensure that the pipe ends are cleanly sealed or can be easily and airtightly extended, we have a silicone adapter for easy ratcheting. The adapter is the icing on the cake for our hot air ducts. It might work without, but it's definitely better with. For one thing, it is safer for people, equipment or cars because the edges, fringes and wire ends of the cut pipe disappear under the silicone cover and therefore have no chance of scratching, pricking or tearing. It is also very practical: one end of the silicone adapter is semi-permanently attached to the cut-off pipe with one of the cable ties supplied. The other end of the adapter can then be tightened to a connection or extension as required using the ratchet clamp (ideal for our parking heaters). Without the ratchet, the silicone adapter, which only makes the pipe 5 mm thicker, is a perfect and aesthetically pleasing end sleeve. After all, the eye camps with you and who wants to look at fraying pipe ends.    

       Model    Volume    Measurements inside    Measurements outside ABP-T010        10 litres               370x200x140 mm                  400x230x156 mm                        ABP-T019 19 litres 500x220x170 mm 530x250x186 mm ABP-S020 20 litres 360x260x180 mm 390x290x200 mm ABP-S023 23 litres 470x350x140 mm 500x380x160 mm ABP-A029 29 litres 360x260x310 mm 390x290x330 mm ABP-A042 42 litres 550x350x220 mm 580x380x240 mm ABP-S060 60 litres 550x350x310 mm 580x380x330 mm ABP-A073 73 litres 550x350x350 mm 580x380x400 mm ABP-S056 56 litres 1220x240x190 mm 1250x270x210 mm ABP-S067 67 litres 550x550x220 mm 580x580x240 mm ABP-S074 74 litres 750x550x180 mm 780x580x200 mm ABP-A081 81 litres 750x350x310 mm 780x380x330 mm ABP-S115 115 litres 550x550x380 mm 580x580x400 mm ABP-S120 120 litres 750x550x280 mm 780x580x300 mm ABP-A134 134 litres 850x450x350 mm 880x480x370 mm ABP-A157 157 litres 750x550x380 mm 780x580x400 mm ABP-S175 175 litres 550x550x580 mm 580x580x600 mm ABP-S163 163 litres 1150x350x380 mm 1180x380x400 mm ABP-S192 192 litres  2100x480x190 mm  2130x510x220 mm ABP-S198 198 litres 1130x720x225 mm 1180x770x260 mm ABP-A240 240 litres 750x550x580 mm 780x580x600 mm ABP-S350 350 litres 1150x750x400 mm 1180x780x420 mm ABP-A415 415 litres 1150x750x480 mm 1180x780x500 mm ABP-S550 550 litres 1150x750x630 mm 1180x780x650 mm ABP-S690 690 litres 1150x750x730 mm 1180x780x750 mm                                           Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina.  Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!

There are many aluminium roof boxes on the market - ranging from expensive, heavy and cheap quality. This aluminium box has an excellent quality/price ratio. It's also water- and dust-proof according to the IP54-Norm. The aluminium alloy of the box offers good protection against salt water and other environmental toxicants. The material strength is 1.0 mm. waterproof / dustproof according to IP54 standard Delivery without FLIXPLUS lashings! Please note that there is one important consideration about aluminum. As always, we make sure our products are stored, handled and shipped with the utmost care. Aluminum boxes, however, can always show minimal scratches, dull spots, blemishes, small dents or other superficial marks on delivery. These are solely due to the specific properties of the material. On contact with atmospheric oxygen, aluminum develops a natural, anti-corrosion patina.  Three times lighter than steel, it is also considerably softer, making it the perfect material for metal sheets, especially when weight and durability are important. The flip side of these properties, though, means that aluminum can never be entirely free of scratches, blemishes etc. This is why these surface marks do not constitute grounds for customer complaints. After all, aluminum boxes are meant to be rugged items for heavy duty use and every mark tells a story. With that in mind, we hope you get the most out of your boxes!

Foldable aluminium windscreen Increase the burning time or heat output of your cooker or barbecue with this practical windbreak.In some situations, cooking is only possible with a windbreak. However, the windbreak should be additionally secured at both ends in strong gusts. for all types of outdoor cookers can also be used as a splash guard 2 integrated ground holders with transport bag Material:100 % aluminium Available sizes: 65x13cm67x24cm

The Roof Lodge Evolution awning ... which can also be used on many roof tents from other manufacturers. The widespread term <awning> is somewhat misleading in itself, as it has always been more of a hanging tent in which you can quickly and easily store camping equipment such as a table and chairs, the little ones' toys and a pint of beer. This not only applies to tidying up in the evening, but also in the event of a downpour. What's more, the fact that these items are no longer immediately visible makes them a little safer from theft. We also like to refer to this awning simply as a <shower curtain>. This name also gives you an idea of the actual size of the hanging tents. This is always 120 cm in depth and 140 cm or 165 cm depending on the tent width. This makes them significantly larger than most showers, but still smaller than what many people imagine. However, if the roof tent is installed at a sufficient height, you have a space that can also be used comfortably for changing. These awnings were and are less suitable for use in bad weather. This results in a requirement profile for them that is completely different from that of the floor tents of the extended tents. As the awning's tent character is clearly in the background, we have given it some thought and completely redesigned it according to its use. They are now made from the same material that we already use for our LIGHTWEIGHT - T109 ripstop nylon with Oxford weave. This material is surprisingly strong for its surprisingly low weight of just 102 g/m² and is the obvious choice for use in an awning. As awnings, like ground tents, usually have to be transported in the vehicle, the pack size is not insignificant. The fact that the usual voluminous and heavy PVC groundsheet has been replaced by a thin and light tarpaulin means that the pack size of the awning can almost be described as tiny.   Due to the type of use, elaborate window constructions are as pointless as spikes for ballerinas - nobody uses them. Of course, windows do have a right to exist in hanging tents; after all, you can not only see outside through them, they also let light into the tent. But this is where the T109 ripstop nylon comes into play again: this material has good light permeability, which puts the question of windows to rest once and for all. The entrance is usually located behind the ladder, which literally stands in the way of quickly stowing away the equipment. That's why we decided not to have an entrance. Some people will now say that Nakatanenga have definitely overshot the mark. But we simply questioned the design of the usual entrances with the entrance fabric, mosquito net and zippers and found that they were not necessary. Our awning therefore doesn't have an ENTRANCE, but of course there is an ACCESS - in fact several. The awning is fitted with zippers at all 4 corners. These can be used to separate the side walls from each other and thus not only determine the access as desired. You can also roll up one or all of the side walls. In the evening, for example, all you need to do is place the table and chairs on the tarpaulin, unroll the side walls and close the zippers. And the awning also offers real added value: the side tent walls also have two eyelets on the underside. The side walls can either be tensioned at an angle or extended using optional telescopic poles. This creates a rain-protected or shaded area of just under 5.5 by 1.2 meters. The awnings are suitable for all roof tents of the appropriate size that use the edge profiles shown on the Roof Lodge Evolution and LIGHTWEIGHT information pages. If you are not quite sure, please do not hesitate to contact us. It is not possible to use the awning and shoe bag at the same time. Note: The telescopic poles are NOT included in the scope of delivery.  

Elf C1 - COMPACT MULTIFUNCTION LAMP MICRO USB WITH LIGHT MODE The Elf C1 is a compact and lightweight multifunction lamp with a standard selection of light modes and micro USB cable.Optimal weight, impressive brightness and easy operation. Even more comfort for active recreation for joggers, alpinists, cavers and anglers.Impressive 1000 lumens in a housing that weighs only 56 grams. The Elf C1 is an excellent main or supplementary light source for any everyday activity. The lamp is easy to take along for an evening walk, hunting, fishing or an outing. It takes up little space, fits in any pocket and does not need to be recharged for 60 days when used in energy-saving mode. The lamp can also be used as a light - from a power source with USB output and no battery inside. Thanks to the Micro USB connection, no charger is needed: any Micro USB cable is suitable for charging. The powerful integrated magnet, the detachable clip and the forehead holder allow for various mounting options, and the additional hole on the back cover qualifies the Elf C1 as a fully-fledged 5-in-1 multi-function lamp. Light and optics: Colour temperature: White / Warm White LED: Samsung LH351D Optics : TIR Luminous flux, lumen: 1000 lm / 930 lm Luminous range, metres: 103 m Brightness stabilisation : DIGITAL (CPU brightness control) Central light field:Lateral spread: 70°:120° Operating modes Number of modes: 6 Running time in highest light level: 52 min (530 lm after 4 min) Running time in lowest light level: 60 d Strobe mode Dimensions and weight Head diameter: 33 mm Housing diameter: 20.4 mm Length: 75.9 mm Weight (without battery): 56 g Housing Material : Aircraft-grade aluminium Anti-slip coating : Premium type III hard anodizing 400HV Protection class against ingress of dust and water : IP68 Max. Immersion depth : 10 m Max. Drop height : 10 m Working range: -25..+40 °C Electronics: Power source compatibility: 1x18350 Li-Ion ( also available here in the shop). Protection against accidental switch-on Coloured battery status indicator Low charge indicator Scope of delivery: Torch 18350 Li-Ion battery 900mAh Micro USB charger Headband holder Retaining clip 2 spare O-rings User manual Application noteFor further application information, please refer to the product data sheet    

Prime C1 Magnet USB XP-L White Flashlight Armytek are famous for creative outdoor and survival flashlights like the angle-head lamps Tiara or Wizard. More traditional flashlights with light beams out of the front are also better when developed and produced by the Canadians. The Prime C1 Magnet USB is such a high-quality flashlight, combining traditional design and extreme performance. A total of 11 light modes, 970 OTF Lumen and 165 m beam distance in the most powerful turbo setting, various strobe modes for signaling and a virtually endless low light setting with 60 days until the battery is drained, those are not the only top arguments in favor of the Prime C1. With a length of only 92 mm, the flashlight is compact enough to fit any pocket and so robust that it can be run over by a car. The Prime is certified to function in water depths of up to 10 m for at least 2 hrs.  In other words, you will never ever have to worry about your flashlight not being protected from rainwater, dirt and dust. As is customary with Armytek lamps, the Prime is activated and operated by a single button. The button has a firm pressure point and is recessed into the housing to prevent accidental activation and draining of the battery. Apropos draining: once the Prime is switched off, the flashlight boasts an ultra-low current drain technology. It would take the battery 25 years or more to go completely flat. Sounds too good to be true? Armytek are so confident in their product that they provide a no-hassle 10-year warranty. The Prime C1 comes with a case, metal clip, two rubber seals, magnetic charging cable and a rechargeable 18650 Li-Ion battery.  Specification: Light & OpticsColor temperature: WhiteLED light output: 1,050 lmOTF light output: 970 lmBeam distance: 165 mLED: XP-LStabilization of brightness : FULL (constant brightness)Hotspot: 20°Spill: 80° Dimensions & WeightHead diameter: 24.5 mmLength: 92 mmBody diameter: 24.5 mmWeight : 60 g Body & DurabilityWaterproof & Submersible: 10 mOperation temperature : -25..+40 °CImpact Resistance: 10 m Modes & ElectronicsPower source: 1x18350 Li-IonNumber of modes: 6Runtime for maximal mode: 30 minRuntime for minimal mode: 60 daysAbility to use batteries with a flat contact: yesProtection from accidental switch-on:yes

Prime C2 Pro - incredibly bright, wide light in a classic format The Prime C2 Pro is an all-rounder for everyday use with a robust body, a practical side scanner and a comfortable light angle of 120°.It is suitable for both everyday and professional use: Walking or cycling, hiking, service work and security activities. The new Prime C2 Pro offers an impressive brightness of 2400 lumens and wider lighting angles than the previous version. The torch also received additional design benefits for the most comfortable everyday use: the length of the housing has been reduced, the striking bezel has been added. The torch comes with a high capacity 18650 Li-Ion 3500 mAh battery that is charged via a proprietary magnetic USB cable. A removable clip attaches the torch securely to a backpack strap or bag, and a magnet in the back cover allows you to attach it to a metal surface. A distinctive steel bezel, secure holster housing and optional colour filters help you successfully tackle any special task. Prime C2 Pro is also compatible with the ABM-01 bicycle mount and can be used as a bicycle headlamp. Light and optics: Colour temperature: cool white Optics: TIR Luminous flux, lumen: 2,400 lm Light range, metres: 123 m Brightness stabilisation: Full (constant light) Central light field: Lateral spread: 70°:120° Operating modes: Number of modes: 6 simple operation by default / 12 advanced operation Running time at highest light level: 2 h 48 min (610 lm after 30 sec) Running time at lowest light level: 6.5 months Strobe mode Dimensions and weight: Head diameter: 25.4 mm Housing diameter: 20.4 mm Length: 117.7 mm Weight (without battery): 68 g Housing: Material: Aircraft-grade aluminium Anti-slip coating: Premium type III hard anodising 400HV Protection class against dust and water ingress: IP68 Max. Immersion depth: 10 m Max. Drop height: 10 m Operating range: -25..+40 °C Electronics Compatibility with power sources: 1x18650 Li-Ion (also available here in the shop!) Use of unprotected rechargeable batteries possible Possibility to use protected batteries Protection against accidental switching on Coloured battery status indicator Low charge indicator Scope of delivery Torch 18650 Li-Ion battery 3,500 mAh Magnetic USB charger Retaining clip Holster with belt loop 2 spare O-rings User manual Application note For further application information, please refer to the product data sheet    

VIKING PRO XHP50 by ARMYTEK This light belongs in every hunter's backpack. Solid housing with 1" standard housing diameter, fits most underbarrel mounts. It is a powerful and robust tactical torch with all-round light pattern. Additional accessories, such as colour filters and cable remotes, have been designed to allow the torch to be used in a wide range of conditions. - Luminosity up to 1,800 OTF lumens.- Light range up to 370 m.- Up to 200 days runtime with a 18650 Li-Ion battery. Light and Optics Colour temperature: White Maximum output (LED lumen): 2,300 lm LED : XHP50 Optics : Smooth reflector (SMO) Maximum output (OTF lumens): 1,800 lm Light range, metre: 286 m Central field of light: 10 Lateral spread: 80° Operating modes: Number of modes: 9 Running time in highest light level: 1h Running time in lowest light level: 200 days Dimensions and weight Head diameter: 25.4 mm Case diameter: 41 mm Length: 154 mm Weight (without battery): 126 g Housing Max. Immersion depth: 50 m Max. Drop height: 30 m Working range: -25..+40 °C ElectronicsCompatibility with power sources: 1x18650 Li-Ion / 2x18350 Li-Ion / 2xR123 Li-Ion / 2xCR123A Protection against accidental switch-on Coloured battery level indicator Low charge indicator Scope of delivery: Holster with belt loop Carrying clip Hand strap Compat ring made of rubber Spare cap for switch 2 spare sealing rings Operating instructions Battery not included in delivery! (2x18350 Li-Ion available here in the shop) Application noteFor further application information please refer to the product data sheet

Wizard C2 - CLASSIC ARMYTEK WITH IMPROVED FEATURES AND NEW DESIGN. The Wizard C2 is the revised version of Armytek's first multifunction lamp.Suitable for anyone who needs a lamp with a standard selection of light modes and the simplest possible operation.The light intensity of this model reaches 1200 lumens at a distance of up to 108 metres. The 18650 Li-ion battery with a capacity of 3200 mAh is charged in the lamp via a special magnetic USB cable. The universal Wizard C2 offers various mounting options: on metallic surfaces via the magnet in the rear cover, on clothing, belts or bags via clip, on the head via a comfortable headband.The Wizard C2 is compatible with the bicycle mount ABM-01 and the helmet mount AHM-02. Light and optics Colour temperature: White / Warm White LED : Samsung LH351D Optics : TIR Luminous flux, lumen: 1200 lm / 1120 lm Luminous range, metre: 108 m Brightness stabilisation : Digital (CPU brightness control) Central light field:Lateral spread: 70°:120° Operating modes Number of modes: 6 Running time in highest light level: 2 h 45 min (580 lm after 4 min) Running time in lowest light level: 200 d Strobe mode: Dimensions and weight Head diameter: 33 mm Housing diameter: 20.4 mm Length: 112 mm Weight (without battery): 64 g Housing Material : Aircraft-grade aluminium Anti-slip coating : Premium type III hard anodizing 400HV Protection class against ingress of dust and water : IP68 Max. Immersion depth : 10 m Max. Drop height : 10 m Working range: -25..+40 °C Electronics Compatibility with power sources: 1x18650 Li-Ion Possibility to use unprotected batteries Possibility to use protected batteries Protection against accidental switch-on Coloured battery status indicator Indication of low charge level Scope of delivery: Torch 18650 Li-Ion battery 3200 mAh Magnetic USB charger Headband holder Retaining clip 2 spare O-rings User manual Application noteFor further application information, please refer to the product data sheet  

Zippy Extended Set Multi-Flashilght Product Description:Zippy Extended Set Armytek, Canadian manufacturer of high quality flashlights for extreme tasks, have developed a small and light keyring lamp for your pocket. Unlike Armytek’s extreme outdoor flashlights Tiara or Wizard, the Zippy is truly an everyday item. Zippy sounds like Zippo, the legendary reusable lighter, and that’s most likely no coincidence because, like the Zippo lighter, the Zippy lamp is small, compact and absolutely reliable. The Zippy is 9 mm thin and weighs only 12 g. In stark contrast to many other keyring lights, usually given away as branded merchandise, the Zippy is a proper multifunctional flashlight with 3 light modes, 160 OTF Lumen and 15 m beam distance in the brightest setting. The wide-angle illumination is a great help when you need to orient in the dark or want to find a misplaced item. There is also a low light “firefly” mode to find a keyhole and a brighter ambient light setting for quick repair jobs. It will be more than enough light to change a tire or a fuse, fix starter cables to a car battery and a lot more. The integrated 100 mAh Li-Pol battery lasts 17 min in the brightest mode and 10 h in the darkest. It is recharged via USB. The Zippy’s housing is water- and dustproof to IP67 standard and protected by stiffening ribs. Its ring attachment is made from metal and firmly integrated into the construction. There’s no breaking it off or tearing it out of the housing. And then there’s another great design feature you’ll appreciate if you hate disposable gadgets as much as we do: The transparent plastic housing is neither glued nor permanently pegged. It can easily be opened by four screws in case it is damaged or something needs to be fixed on the inside. The likelihood of failures, however, can be gauged by the fact that the Zippy comes with a 5-year no-hassle warranty. The Extended Set includes a metal clip for belts, bags or caps and a magnetic, multifunctional swivel-mount for headbands or temporary attachment to car bodies or other metal surfaces. The Zippy comes in blue, green, yellow or gray. Armytek is a Canadian brand for high qualtity multi-flashlights for extreme performance in job and hobby. As the brand name suggests, the products are designed to correspond to military standards regarding functionality and quality. Available in 4 different colors! The lamp WITHOUT magnet and headlamp attachment can be found here. Product Specification: Light & OpticsLED light output: 200 lmOTF light output: 160 lmBeam distance: 15 mStabilization of brightness : FULL (constant brightness)Hotspot: 60°Spill: 110° Dimensions & WeightLength: 59 mmWeight : 12 g Body & DurabilityBody material : PlasticWaterproof & Submersible: 1 mWaterproof and dustproof standard : IP67Operation temperature : -10...+40 °CImpact Resistance: 2 m Modes & ElectronicsPower source: Li-Pol 100 mAhNumber of modes: 3Runtime for maximal mode: 17 minRuntime for minimal mode: 10 hAbility to use batteries with a flat contact: yesProtection from accidental switch-on: yes

Armytek Zippy Keychain Flashlight Armytek, Canadian manufacturer of high quality flashlights for extreme tasks, have developed a small and light keyring lamp for your pocket. Unlike Armytek’s extreme outdoor flashlights Tiara or Wizard, the Zippy is truly an everyday item. Zippy sounds like Zippo, the legendary reusable lighter, and that’s most likely no coincidence because, like the Zippo lighter, the Zippy lamp is small, compact and absolutely reliable. The Zippy is 9 mm thin and weighs only 12 g. In stark contrast to many other keyring lights, usually given away as branded merchandise, the Zippy is a proper multifunctional flashlight with 3 light modes, 160 OTF Lumen and 15 m beam distance in the brightest setting. The wide-angle illumination is a great help when you need to orient in the dark or want to find a misplaced item. There is also a low light “firefly” mode to find a keyhole and a brighter ambient light setting for quick repair jobs. It will be more than enough light to change a tire or a fuse, fix starter cables to a car battery and a lot more. The integrated 100 mAh Li-Pol battery lasts 17 min in the brightest mode and 10 h in the darkest. It is recharged via USB. The Zippy’s housing is water- and dustproof to IP67 standard and protected by stiffening ribs. Its ring attachment is made from metal and firmly integrated into the construction. There’s no breaking it off or tearing it out of the housing. And then there’s another great design feature you’ll appreciate if you hate disposable gadgets as much as we do: The transparent plastic housing is neither glued nor permanently pegged. It can easily be opened by four screws in case it is damaged or something needs to be fixed on the inside. The likelihood of failures, however, can be gauged by the fact that the Zippy comes with a 5-year no-hassle warranty. Armytek is a Canadian brand for high qualtity multi-flashlights for extreme performance in job and hobby. As the brand name suggests, the products are designed to correspond to military standards regarding functionality and quality.Brightness up to 160 OTF Lm.Beam distance up to 15 m.Built-in Li-Pol 100 mAh battery.5 years no-hassle warranty. Specificationavailable in blue, yellow, green and gray Light & OpticsLED light output: 200 lmOTF light output: 160 lmBeam distance: 15 mStabilization of brightness : FULL (constant brightness)Hotspot: 60°Spill: 110° Dimensions & WeightLength: 59 mmWeight : 12 g Body & DurabilityBody material : PlasticWaterproof & Submersible: 1 mWaterproof and dustproof standard : IP67Operation temperature : -10...+40 °CImpact Resistance: 2 m Modes & ElectronicsPower source: Li-Pol 100 mAhNumber of modes: 3Runtime for maximal mode: 17 minRuntime for minimal mode: 10 hAbility to use batteries with a flat contact:Protection from accidental switch-on: yes

Sewing tool for minor repairs This easy-to-use sewing tool is virtually indispensable for every household. Strong textile materials such as tarpaulins, leather or imitation leather are sewn together with upper and lower thread similar to a sewing machine permanently, stably and visually appealing. Suitable for sewing on tarpaulins, tents etc. Thus, this tool is ideally suited for minor repairs to roof tents. Easily repair rising seams or small accidents yourself in no time. Delivery:Sewing tool with spool and needle

Awning Organizer Ordering is no longer difficult with this handy Awning Organizer. Unused space becomes the perfect storage facility in a jiffy. Important things are no longer in the way but still within reach. The supplied cords and wooden knobs make fixing easy and possible in many different ways. Color: gray Dimensions: Width: 45 cm / Height: 105 cm Delivery:  1 Organizer 4 rope cords  4 wooden knobs 

SPRAY ON - LET IT WORK - WIPE OFF - DONE This is how simple the application of Ballistol Grill Cleaner can be described. The active foam's effectiveness helps to remove grease splashes, stubborn encrustations, marinade residues and many other stains from grills and grates. Product features: Strongly adhesive, powerful active foam High fat dissolving power Removes burnt-on residues, fresh or dried-on grease, marinade residues, etc. without leaving any residue Also suitable for gas nozzles, stainless steel covers, enamelled grills and plastic parts Extremely productive Developed with barbecue professionals easily biodegradable without nanotechnology Gentle on many surfaces: Stainless steel, enamel, plastic etc. Note: Not suitable for light and non-ferrous metals, painted or non-stick surfaces. Caution: Causes skin irritation. Causes severe eye irritation. If medical advice is needed, have packaging or label at hand. Keep out of the reach of children. Wash thoroughly after use. Wear protective gloves / clothing / eye protection / face protection. In case of contact with skin: Wash with plenty of water. In case of contact with eyes: Rinse cautiously with water for several minutes. Remove contact lenses if possible. Continue rinsing. In case of skin irritation: Seek medical advice / medical attention. If eye irritation persists: Seek medical advice / attention. Remove contaminated clothing and wash before reuse. Dispose of contents / container for recycling.