27 LED Tent Light Starter Kit, 155 lumens, length: 30cm Operation with 12 V via plug or with 230 V with adapter (both included) 30 LEDs on a rigid, 30 cm long light strip for a light output of 155 lumens Includes clips, adhesive pads and adhesive tape for mounting 2 m cable for flexible positioning.

he 3D mattress pads are ideal for roof tents and other applications. These so-called spacer fabrics are ideally suited for rear ventilation of mattresses in roof tents, campers and on yachts. "Floating like on clouds" takes on a new meaning with these high-distance structures. The mat is placed between the mattress and the attic tent floor and contributes to a healthy and restful sleep thanks to its climate regulation. The mattress pads have matching cutouts for the tent poles on both sides. Thickness: 10 mmWidth: ideal for our Roof Lodge roof tents 140/165 and for other 140 cm and 165 cm wide roof tentsLength: 230 cmMaterial: 100% polyester Note: If necessary, the documents can be cut with any good household scissors. The optimal ventilation of the mattress base made of 3D fabric works like an invisible air conditioning system. Around 1 million upright PE threads per square meter allow moisture to escape ideally before it leads to waterlogging, mold stains or the formation of mold. Due to the excellent air and load distribution of the 3D fabric, the mattress base adapts to every contour, which significantly increases comfort. Please select the appropriate width.  

Sensationally cheap These are the same material as our mattress pads for the roof tents. This so-called spacer fabric is optimally suited for ventilating mattresses and is therefore particularly well suited to where the air has to circulate. The 1 million upright PE threads per square meter also guarantee excellent load distribution. The 3D fabric adapts perfectly, which significantly increases comfort. Due to the cushioning and cushioning effect, the material is ideally suited for conversions on mobile homes and the like. Thickness: 10 mmWidth: 26 cm / 30 cm - please choose the desired versionLength: 1 meter - a maximum of 5 meters is possible in one pieceMaterial: 100% polyester Note: The 3D mesh can be cut with any good household pair of scissors, and can also be easily sewn into larger surfaces by hand or sewing machine with a strong thread. Normally you will get up to 5 m at a time. For special blank requests, please contact us in advance (meter by meter). The 3D mesh material is available in 26 cm and 30 cm width - delivery in whole meters. 9€ / m²

- can be used with 12 volts (plug) or 230 volts (mains adapter), both supplied - 90 LEDs on a flexible, 90 cm long light strip with an output of 294 lumens - comes with clips, sticky pads and tape for attachment - 2 metres long cord for flexible mounting

Sewing tool for minor repairs This easy-to-use sewing tool is virtually indispensable for every household. Strong textile materials such as tarpaulins, leather or imitation leather are sewn together with upper and lower thread similar to a sewing machine permanently, stably and visually appealing. Suitable for sewing on tarpaulins, tents etc. Thus, this tool is ideally suited for minor repairs to roof tents. Easily repair rising seams or small accidents yourself in no time. Delivery:Sewing tool with spool and needle

Roof tent accessories - roof tent hood A roof tent hood as a spare part in the color black - suitable for all Roof Lodge Evolution 1 and 2 (140 and 165 - Basic and Extended) and Roof Lodge Lightweight. The roof tent hood is also suitable for roof tents from other manufacturers with the same dimensions. The picture is for illustration purposes only, we reserve the right to make technical changes.

Extension strip for Evolution front and bottom tents The front and bottom tents of the EVOLUTION series are designed for a tent mounting height of up to 210 cm. If the roof tent is mounted at a higher height, then an extension strip should be used for these front or bottom tents, which compensates for the missing difference. The extension strip is simply zipped between the bottom pan and the underside of the tent sidewalls and compensates for a net difference of 20 cm. Of course, the zipper thus added is protected by a tarpaulin from direct rain. Please note:The awning (Basic) and floor tent (Extended) look very similar, so we ask you to measure the lower circumference of your tent, where the extension strip is used. Please give us the dimensions of the scope by phone before placing your order, so we can ensure that you receive the right extension strip. Tel .: 0049 9181/466644 Thank you very much.

Finally arrived at the perfect place to make yourself comfortable in the roof tent. And who does not know that: the ladder wobbles because the ground is uneven or even the ladder slips away. This is extremely annoying. The solution is so easy for us.With these leveling feet for roof tent ladders you can adapt to any local conditions. Due to the rubberized surface even a smooth surface is no longer an obstacle. Uneven ground or if you are in the slope, that's no longer a problem. You have a secure grip on asphalt and beyond the paved road. Instructions: Please follow the steps in the pictures (see gallery pictures from step 1 to step 6). Consisting of:2 pieces knurled screw2 pieces of joint feet2 pieces mounting bracket1 piece of storage bag

Foam mattress for your roof tent The mattress is available in sizes 140 cm x 240 cm x 6 cm and 165 cm x 240 cm x 6 cm. The delivery takes place WITHOUT mattress cover! Material:The mattress is made of foam with a sub-cover made of 100% cotton. Annotation:The hard version is basically suitable from about 100 kg. Please note that the feeling is subjective and the hard variant may still be too hard for you. Also this mattress is: "Made in Germany" Please select the appropriate width. Please note: For hygienic reasons, this item is generally excluded from return.

Mounting kit for Roof Lodge roof tents on Frontrunner roof racks Four longer counter plates, are needed for mounting our old Roof Lodge roof tents on Frontrunner roof racks. The counter plates can also be used for mounting our quick mounting rails on roof racks with wide crossbars! Material: Stainless steel

Nakatanenga Bear Pillow Travel pillow and cuddly bear in one!The Nakatanenga Bear Pillow! Fluffy soft and bearish good! Pillow with microbead filling, incl. nylon storage bag with drawstring.2in1 - pillow with filling, winter/summer side, certified according to Oeko-Tex 100 standard.Turning the fur around turns the cuddly bear into the cushion and the cushion into the bear again. On the outside, Nabaki's plush fur is fluffy and soft, and on the inside there is a double-sided cushion with a winter and a summer side, both certified according to Oeko-Tex 100. The filling consists of microbeads for restful sleep. And for Nabaki's dust-free winter or summer sleep in the wardrobe, we also supply a storage bag with cord.Nabaki is the bear among travel pillows - day and night!Colour: brownMaterial: Plush cover: 100% polyesterSmooth side: 87% Polyester / 13% SpandexFilling: 100% polystyrene

Access to the roof of a car is usually something for climbing professionals - especially from the side. This applies to expedition-ready 4x4s with CargoBear-style system carriers that can be climbed by ladder, and especially to SUVs with ski racks or family vans with roof boxes. Often the vehicles are simply too high or the drivers too small or unathletic to get safe and easy side access to the roof load. They try to find a foothold on the seats by groping with their feet while holding on tightly with one hand to avoid tipping over backwards. Or you climb onto boxes or makeshift ladders and let the passenger support you, but who always has ladders or a passenger with them? What fits into the car in any case is our convenient and safe climbing aid for hanging into the body-side locking brackets of the door locks. The ladder replacement is hooked into the catch eye of the latch with a simple, fold-out hook. The pressure of the rubberised rear edge of the step surface on the B- or C-pillar results in an absolutely safe climbing aid under load that does not wobble or slip. This way, you can reach every side of the car roof safely and quickly without much effort. The locking brackets of the car doors have to withstand forces that are many times the weight of the human body so that the door does not open in the event of an accident or attempted break-in. The ladder itself is made of an extremely solid aluminium alloy and is designed to withstand 200 kg. This means that even large and heavy contemporaries need not worry. However, the first use should be carried out with caution and care in order to get the necessary safety when climbing. The step is covered with non-slip, grooved PVC and to ensure that the paintwork is not damaged, there is an additional rubber protector that can be attached to the edge of the step. By the way, if there is no more room for the foldable door step in the glove compartment or the centre shelf, you can leave the emergency hammer at home, because it has a steel tip at the front and thus also functions as a rescue tool for breaking windows. ATTENTION: not suitable for Land Rover Defender up to MY2016

The protective hoods of roof tents usually have to take a lot during the season. The exposed position of the tents makes this almost inevitable. If the hood is damaged, foxing threatens the tent very quickly. For some, then Gaffa tape is the tried and tested medium of choice. Often enough for the rest of the journey. The consequences of a minimal leaking hood are not immediately visible or smelling! To prevent a nasty surprise in the spring, there is now our repair kit for PVC protective hoods. Material and tools are especially designed for larger repairs. Delivery: 2x brushes 1x 50 ml glue 1x PVC material 48x48cm Manual: Cut the patches and round off the corners. Clean the areas to be bonded (warm soapy water or degreasing detergent) After drying for 10-15 minutes, the glue can be applied to both sides with a brush. (Attention: do not apply too much and above all apply evenly) Let the adhesive surfaces dry again for 10-15 minutes so that the solvents can escape. Touch the glue - if it is dry, you can continue. Place the patches precisely and press firmly. Experts use a roller here. Similar tools like a bottle or rolling pin works too. Important here is the exact positioning, since a later adjustment of the patches is no longer possible. Also, the force that is applied to push the tarpaulin later decides the strength of the adhesive surface. Dry overnight and let air dry for long-term maintenance.

Suitable for Roof Lodge roof tents with pull-out ladder from year of construction 2019 Rung width: 30 cm Please note:We have two different ladder extensions. On the basis of the black cap you can check which is the appropriate extension. Please check the pictures and compare with your ladder. If this ladder extension does not fit, you will find the suitable extension here.

Adapter set for mounting the roof tent If the attachment points of the roof tent are directly on the feet of the roof racks, the adapter set offsets the attachment points and the roof tent can be mounted easily and safely. Scope of delivery: 2 pcs adapter plates2 pcs counter platesScrews Note:Sliding blocks and sliding plates are NOT included in the scope of delivery! Are only for better understanding shown in the pictures!The adapter plates are only suitable for beams where the beam foot does not include the crossbar.The carrier feet must NOT be machined in any case!

Product information Ladder can be used as a spare part for our ROOFLODGE EVOLUTION folding tents. Rung width: 30 cmLadder dimensions: retracted 1.2 m / extended 2.15 m Here you will find a matching ladder extension - for up to a further 45 cm. Please note that for older Roof Lodge Evolution folding tent models, the ladder bracket must be remounted on the base plate of the roof tent.

Another day is done, be it on the road or outdoors, and you’re looking forward to your cozy sleeping bag either classically in a tent or in your RoofLodge on top of the car. Especially when it’s wet and windy, one thing is of utmost importance for your comfort: shoes have to stay outside! Who wants to have dirt, wet and smell in your sleeping quarters? And just so that you don’t find your shoes in the morning wetter than before, we have a perfect Nakatanenga boot bag for you so that you can keep your stuff clean and dry within reach from the tent. No more plastic bags for you! Our bootbag can be inserted into keder rails and that’s why it is perfect for roof tents. There are two D-hooks as well, so that you can hang the bag from virtually anywhere in the camp or the car: ropes, poles and much more. The bag is big enough to take a lot more than just sneakers, crocs or flipflops. Hiking or biker boots are no problem. A sewn-in elastic cord with a toggle and a big flap with a click fastener make sure that this bag, in contrast to others on the market, can be properly closed. Rain, dirt or nosey animals are kept out for sure. The bottom of the bag features a mesh insert for good ventilation and draining of moisture. Who wants to step into wet and clammy boots first thing in the morning? The robust Nakatanenga shoe bags are available in the colour grey coyote. Material gray-coyote: nylon PU-coated

Practical shoe bag for roof tents Another day is done, be it on the road or outdoors, and you’re looking forward to your cozy sleeping bag either classically in a tent or in your RoofLodge on top of the car. Especially when it’s wet and windy, one thing is of utmost importance for your comfort: shoes have to stay outside! Who wants to have dirt, wet and smell in your sleeping quarters? And just so that you don’t find your shoes in the morning wetter than before, we have a perfect Nakatanenga boot bag for you so that you can keep your stuff clean and dry within reach from the tent. No more plastic bags for you! Our bootbag can be inserted into keder rails and that’s why it is perfect for roof tents. There are two D-hooks as well, so that you can hang the bag from virtually anywhere in the camp or the car: ropes, poles and much more. The bag is big enough to take a lot more than just sneakers, crocs or flipflops. Hiking or biker boots are no problem. A sewn-in elastic cord with a toggle and a big flap with a click fastener make sure that this bag, in contrast to others on the market, can be properly closed. Rain, dirt or nosey animals are kept out for sure. The bottom of the bag features a mesh insert for good ventilation and draining of moisture. Who wants to step into wet and clammy boots first thing in the morning? The robust Nakatanenga shoe bags are available in the colour grey coyote. Material gray-coyote: nylon PU-coated

Mobile parking heater without battery and in aluminium box You can find information on hire equipment below. “It's a Thin Line Between Love and Hate” is the old song and this thin line between loving and hating the same thing is definitely the line on the thermometer in winter. If you freeze off the part of your body with an A, you're guaranteed not to enjoy even the fattest fish at the ice hole, the most magical aurora borealis or the greatest fun at the elephant meeting. That's why we have our solution for all outdoor activities in the cold seasons in the Alubox Pro: the AUTOTERM parking heater for on the go! With the exception of the battery, everything you, your family or your crew need for a warm and cozy outdoor feeling in your car, camper or roof tent is in the ultra-robust, waterproof 29L box. At its heart is the affordable and powerful AUTOTERM (Planar) 2D12 air heater, which can be powered from the vehicle battery via the cigarette lighter adapter. It is controlled via the PU5 control element. A 5.4 l fuel tank is already integrated in the box. This makes our mini heater ideal for on the road and mobile use on the vehicle or wherever a weatherproof cable connection to a car battery can be established. The warm air is transported into the room to be heated via a firmly screw-fastened, waterproof Flexi hose, which can be ordered separately in the desired length here in the store. ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. Furthermore, for optimum heating performance, care should be taken to ensure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. You can find the perfect storage bag for the Flexi hose here in the store.A larger standalone version of this parking heater with integrated battery is available here. You can also hire this parking heater from us.  Alu-Box Pro (29 liters) waterproof/dustproof according to IP54 standard AUTOTERM (Planar) 2D diesel / air heater ✔ Fuel tank (5.4 liters)✔ Hot air pipe connection, non-return valve, outlet and inlet feed-through✔ Including radio remote control✔ The openings for supply and exhaust air and for the power supply are splash-proof (can be closed with a screw cap or rubber plug)Dimensions of the aluminum box: WxHxD 390x340x290mmDimensions of the box with spigot: WxHxD 490x340x290Total weight: 11.2 kgTechnical data of the parking heater:- Fuel type: Diesel- Heating output: max. 1.8kW, min. 0.8kW- Volume of heated air: max. 75m³/h, min. 34m³/h- Fuel consumption during operation: max. 0.24l/h, min. 0.1 l/h- Power consumption during operation: max. 29W, min. 10W- Manual start/stop- Connection to a car battery or another external 12V battery PU-5 control element: - LED for ventilation display- LED for operating display- Temperature adjustable via rotary control The AUTOTERM Air 2D (Planar 2D) is equipped with an altitude kit! This means that the heater automatically reduces the injection volume according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content falls. The maximum heat output decreases in proportion to the amount of oxygen in the air. Roughly speaking, from 2000 meters upwards, the loss of output per 500m altitude is approx. 5%. Manufacturer tests up to 3440m were problem-free. No problems are to be expected up to 4000m. Up to 5000m the software calculates itself - but this could not yet be tested at real altitude. Please note: Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating the mobile parking heaters.The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this..In general, however, direct connection to the battery terminals is the best solution      

Promises reliable hold when you need it! This suction cup with a fixed mounting ring can be mounted on smooth, clean and stable (vehicle) surfaces. The maximum load is about 10 kg. Easy and quick attachment for awnings, tarp's or other elements. This screwless suction cup with its approx. 240 g and a diameter of 115 mm is transported quickly and easily. Technical details: Weight: approx. 250 gLoad: max. 10 kgDiameter: 115 mm Delivery:1 suction cup with fixing ring

Tent light remote control With this remote control, you can switch our 30 cm long tubular tent light or our 90 cm long tubular tent light on and off manually by remote control. The radio connection reaches a little more than 3 metres even through the tent material. You can attach the remote control to a key ring via the small attached carabiner.

Tent Raise +30mm, Mounting Set The Roof Lodge mounting set makes it easy to attach roof tents (folding tents or hard-shell tents) to Frontrunner roof racks. The 30 mm height adjustment bridges the circumferential edge of the roof rack.The mounting set is completely made of stainless steel and is supplied with the necessary mounting material. Please select below whether you require the assembly set for a folding awning (e.g. Roof Lodge) or a hard-shell roof awning (e.g. Maggiolina).Scope of delivery of the assembly set for folding tents:4x raising brackets12x screws, nuts and washers (for fastening the brackets to the support and for connecting the bracket to the sliding plate of the mounting rail).Please note: The sliding plates, which are positioned in the mounting rails of the tent, are not included in the scope of delivery!Scope of delivery mounting set hard-shell tents:6x tent raising brackets12x screws, nuts and washers (for fastening the brackets to the support)6x sliding plates (for positioning in the mounting rails of the tent)6x locker bolts with nuts and washers