Comfort spring set TREKFINDER for LAND ROVER Defender 110 with VA +20 / HA +0 millimetres the lifting is +20 millimetres at the front axle, +0 millimetres at the rear axle matched to the TREKFINDER® shock absorbers Raid ( article no. 90-5470 + 905471 ) SCOPE OF DELIVERY: 4 pieces TREKFINDER® coil springs progressive 1 piece TÜV® parts certificate Suitable for Land Rover Defender 110 until BJ 2016  

Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER Raid Complete suspension TREKFINDER for LAND ROVER Defender 110 with TREKFINDER shock absorber RAID + 20 millimeters on the front axle and 0 millimeters on the rear axle in comfortable tuning.Scope of delivery:     4 pieces TREKFINDER coil spring progressive     4 pieces TREKFINDER shock absorber KONI Raid     1 piece TREKFINDER sticker     1 piece parts certificate

HD suspension for Land Rover Defender 110 (for heavily loaded rear axles) Set consists of:  1x TREKFINDER coil springs  2x front axle shock absorbers 2x holder for additional spring, rear, bottom 2x bracket for additional spring, rear, top 1x lift spring set for Land Rover Defender 110 2x shock absorber Koni HeavyTrack RAID Defender  Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Spring lift-kit for Land Rover Defender 110, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg on the back wheels, while allowing you to still use the stock dampers. The package contains: * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.

Spring lift-kit for Land Rover Defender 90, manufactured by Trekfinder. The kit elevates the ride height by about 40 mm and optimizes the riding comfort. Renowend suspension manufacturers H&R and STOCK & STEIN joined forces to create a no-compromise solution and this is the result. The progesively wound springs allow for 80 kg of additional load on the front and 250 kg  on the back wheels, while allowing you to still use the stock dampers. The package contains : * 4 x TREKFINDER progesive springs* 1 x TÜV Parts-Certificate Due to the increased articulation angle of the front cardan shaft, which is caused by the lift, we recommend installing a cardan shaft with a double joint.Cardan shaft for Defender Td4 from MY07 can be found here.Cardan shaft for Defender Tdi / Td5 to MY07 can be found here.

Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines exclusively for vehicles type GM ( passenger car ) WITH additional weight ( approx. 80 kg ) due to a winch attachment at the front the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&amp;R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Lifting spring kit TREKFINDER for INEOS Grenadier + approx. 30 millimetres the lift is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT cable winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate <iframe width="1188" height="668" src="https://www.youtube.com/embed/Ex0-px1m0LE" title="INEOS GRENADIER Höherlegungsfedernsatz (+30mm) von TREKFINDER und H&amp;R" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

Lifting spring set TREKFINDER for Land Rover Discovery Sport Type LC approx. +30 millimetres the ride height is approx. +30 millimetres suitable for Land Rover Discovery Sport Type LC the standard shock absorbers can still be used Scope of delivery: 4x piece TREKFINDER coil spring 1x piece TREKFINDER sticker 1x piece parts certificate

Suspension for Land Rover Defender 130 Set consists of:  1x TREKFINDER coil springs 1x lift spring set 2x shock absorbers for Land Rover Defender 90 / 110 / 130 2x shock absorbers Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Suspension for Land Rover Defender 130 Lightweight Set consists of:  1x TREKFINDER lift spring set for Land Rover Defender 1102x shock absorber for Land Rover Defender 90 / 110 / 130 front axle2x shock absorber Koni Heavy Track RAID Defender Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.     

Lifting suspension TREKFINDER for Land Rover Defender 110 - with TREKFINDER shock absorber KONI Heavy Track RAID - with approx. +40 millimetre lift To optimise the Land Rover Defender 110, the renowned shock absorber manufacturer KONI and the spring manufacturer H&R and STOCK & STEIN have joined forces to offer the best possible solution for suspension optimisation. The suspension has been designed for vehicles with an additional weight of up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle. This means that regardless of whether your Defender is equipped without a payload and additional attachments, or whether, for example, a cable winch has been installed at the front, a roof rack in the middle and camping equipment at the rear - the suspension masters all driving situations! Scope of delivery:* 4 TREKFINDER coil springs * 4 TREKFINDER shock absorbers * 1 TREKFINDER sticker * 1 parts certificate Due to the increased articulation angle of the front cardan shaft caused by the lift, we recommend the installation of a cardan shaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here. Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.   

Lifting suspension TREKFINDER for Land Rover Defender 90 - with TREKFINDER shock absorber KONI Heavy Track RAID - with approx. +40 millimetres lift ZTo optimise the Land Rover Defender 90, the renowned shock absorber manufacturer KONI and the spring manufacturer H&R and STOCK & STEIN have joined forces to offer the best possible suspension optimisation solution. The suspension has been designed for vehicles with an additional weight of up to approx. 80 kg on the front axle and approx. 250 kg on the rear axle. This means that regardless of whether your Defender is equipped without a payload and additional attachments, or whether, for example, a cable winch has been installed at the front, a roof rack in the middle and camping equipment at the rear - the suspension masters all driving situations! Scope of delivery: 4 TREKFINDER coil springs 4 TREKFINDER shock absorbers 1 TREKFINDER sticker 1 piece parts certificate  Due to the increased articulation angle of the front propshaft caused by the lift, we recommend the installation of a propshaft with double joint.  Cardan shaft for Defender Td4 from MY07 can be found here.  Cardan shaft for Defender Tdi/Td5 up to MY07 can be found here.   

Lowering Kit for a Land Rover Defender 110 by TREKFINDER with progressively winded springs incl. TÜV parts-certificate. Made by H&R. The lowering kit reduces the ride height by about 45 mm in the front and 40 mm in the rear. The springs themself are maufactured from a special spring steel and polyurethane coated. The springs are designed to work with the stock dampers, but the load on the rear axel must be reduced to 1800 kg ! The springs guarantee  a comfortable ride, while reducing body roll dramaticly and improving the handling. The scope of delivery: 4x Lowering Springs1x TÜV Parts-certificate.

Lowering spring kit TREKFINDER for INEOS Grenadier - approx. 30 millimetres the lowering is approx. 30 millimetres suitable for 6-cylinder diesel & petrol engines for vehicles WITHOUT winch the standard shock absorbers can still be used Trailer operation is permitted Suitable for the following versions: Vehicle manufacturer: Ineos Automotive ( UK ) Commercial designation / version: INEOS GRENADIER Permissible axle loads ( v / h ) in kg: 1667 / 2150 Vehicle type / make: GM with EG-TG-No.: e9*2018/858*11384*... Vehicle type / make: GN with EG-TG-No.: e9*2018/858*11385*... Scope of delivery: 4 pieces TREKFINDER coil springs ( HA progressive and VA linear ) 1 piece TÜV® parts certificate

Metal sleeve rubber mount for Koni Heavy Track RAID shock absorber 90-5375SP1 + 90-5471, top suitable for all years of construction! Scope of delivery: 1 piece

Mounting material for 1 piece KONI/ TREKFINDER Heavy Track RAID damper 90-5374SP1 + 90-5470, top and bottom Mounting material for the pin mounting of the shock absorber on both sides Suitable for all LAND ROVER Defender models Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces nut self-locking

Mounting material for 2 pieces KONI/ TREKFINDER Heavy Track RAID  shock absorber 90-5375SP1 + 90-5471 below Mounting material for the pin fastening of the shock absorber - suitable for LAND ROVER Defender models up to approx. 2001 ( no pot mounting ) Scope of delivery: 8 pieces metal washer + 4 pieces rubber + 2 pieces self-locking nut

Shock absorber TREKFINDER for LAND ROVER Defender 90 / 110 / 130 rear axle by KONI RAID Shock absorber TREKFINDER for LAND ROVER Defender 90/ 110/ 130 + Discovery I + Range Rover Classic front axle by KONI Heavy Track RAID - suitable for suspensions from 0 to 5 cm ride height - unit price.

Silencer / Spacer f. height compensation (P38 or Salisbury axle)  Description:  the item can be used on the rear axle on 110s and 130s.  optimal possibility for level compensation/ the height adjustment is 10 millimetres the ring consists of a zinc, phosphated metal ring with coil spring centring and vulcanised NR/ SBR rubber the rubberised surface of the ring reduces the transmission of vibration noise the washer is placed between the spring end and the spring plate, max. one washer per spring end is possible, i.e. max. two washers per spring, i.e. max. 20 mm height increase per spring is possible price per unit

Spring spacer set ( FDS ) TREKFINDER for LAND ROVER Defender 110/130 Suitable for: Defender 110 Defender 130 Details: the lift is 30 millimetres made of aluminium black hard anodised the scope of delivery is for both axles, i.e. a complete car the discs are installed between the lower spring end and the spring plate the standard shock absorbers can still be used the discs may only be used with the standard springs please also note the optional mounting kit Art. No.: FDS-AN SCOPE OF DELIVERY: 4 spacer discs 1 TÜV® parts certificate  

Spring Distance Set ( FDS ) TREKFINDER for LAND ROVER Defender 90 Suitable for: Defender 90 Details: the lift is 30 millimetres made from aluminium black hard anodised the scope of delivery is for both axles, i.e. a complete car the discs are installed between the lower spring end and the spring plate the standard shock absorbers can still be used the discs may only be used with the standard springs SCOPE OF DELIVERY: 4 spacer discs 1 TÜV® parts certificate  

Reinforced steering damper for the Land Rover Defender The reinforced steering damper is the ideal upgrade for the Land Rover Defender to significantly improve steering precision and driving stability, especially in off-road use. By reducing unwanted steering movements and vibrations caused by bumps in the road, this damper enables a safe and comfortable driving experience.Improved durability and performanceEquipped with advanced "Foam Cell" technology, which prevents oil and gas mixing, and a precision-machined 35 mm piston, the damper ensures optimum performance and durability both on and off-road. It is particularly effective against unstable handling caused by factors such as ruts, oversized tires or wheel spacers."Foam Cell" technologyFoam Cell technology prevents the oil from foaming, which ensures consistently high performance. This technology eliminates the risk of oil-air mixing and reduces the risk of overheating, making the damper particularly efficient.Increased ride comfortIn use, the damper effectively reduces unwanted movements and vibrations, which significantly increases ride comfort, especially at higher speeds and off-road. The stable steering control and improved directional stability in all conditions ensure a safe driving experience.When is a reinforced steering damper for the Defender useful?The reinforced steering damper for the Land Rover Defender is particularly useful if larger tires or a track widening are installed or the Defender is raised. This is because the conversion significantly increases the forces acting on the steering damper. In this case, the standard steering damper of the Defender quickly reaches its limits. The steering feels spongy and bumps in the road are very noticeable.Installation and registrationInstallation is straightforward and does not require TÜV registration, thanks to the adaptation to existing mounting points. Technical data: "Foam Cell" technology in twin-tube design 35 mm bore and sintered piston No TÜV registration required Simple installation on original mounting points  

Steering damper for LAND ROVER Defender 90+ 110+ 130 from TREKFINDER Made by BILSTEIN B6 Steering damper for Land Rover Defender all models from TREKFINDER Made by BILSTEIN - to optimise the Land Rover Defender, the well-known shock absorber brand BILSTEIN and STOCK & STEIN have joined forces to offer the best possible solution for suspension optimisation in the area of steering behaviour. The result is a steering damper specifically for Defender that is unique in terms of functionality and performance.1 piece

Inside spring set by TREKFINDER, optional for the rear axel with installed liftkit. Scope of Delivery: 2x Progressively wound spring coils