Content: 0.31 liters (€70.97* / 1 liters)
Spare Parts and Consumables
Repair plate rear tub, 3 pieces, Defender 110 Td4, Td5 and TDI
From
€69.00*
Repair panel rear sump for Defender 110 Td4, Td5 and TDI
Rust thrives best when it is hidden, especially when corners, angles or edges favour the constant accumulation of water and damp dirt. This is why Defender 110 Station Wagons often have hidden rust spots under the rear seat bench mount or on the frame holder. To avoid having to replace the entire base plate of the rear tub in the event of advanced contact corrosion, we now offer an exclusive, easy-to-fit repair kit for the particularly susceptible area under the seat bench. The kit consists of the main plate, two side parts and sufficient rivets.
For installation (see pictures), the existing welding points on the rear tub are first drilled out. The sheet metal is then simply positioned accordingly, glued in place with body sealant and fixed at the sides with clamps. Once dry, drill the sheet metal at the pre-drilled welding points and insert the rivets. The two side panels are then attached in the same way.
Please select:
Complete set 3 pieces consisting of: Repair plate main part and 2x corner parts
2-piece set consisting of: 2x corner pieces
Product number:
REPBLEHEWAM
various door seal sets for Land Rover Defender
From
€69.80*
Various door seal sets for Land Rover Defender.
Product number:
DICHTVORM
Beam wiper blades for the New Defender MY 2020
€34.90*
Beam wiper blades for the New DefenderLooking for replacement wiper blades for the windscreen of your New Defender? Then we definitely have a recommendation for you. These wipers from VALEO deliver exactly what their name suggests: Silencio! And it's not just VALEO’s marketing department – a French global automotive supplier – that says so, because we've tested them ourselves, thoroughly. When you buy VALEO Silencio, you are guaranteed top European quality in terms of materials, workmanship and accuracy of fit. This combination ensures excellent wiping performance over the entire surface without jerking or rubbing and also - as the name Silencio promises - extremely quiet operation.
VALEO uses VisioRubber, a rubber technology that combines the best properties of natural double density rubber with synthetic exterior coating. In our own tests, we experienced far superior efficiency and very quiet wiping without squeaking or smearing. In our opinion, the trade-off with a comparatively shorter service life of these wiper blades is of little consequence given the impressive advantages.
As with all quality wipers, the installation is uncomplicated. Fits all variants of the New Defender (MY 2020). Set includes two wiper blades.Product size 55x2x3cm
Product number:
FBW-NEWDEF
Schalter für Blinker-Fernlicht-Hupe - für Land Rover Defender
€59.00*
Switch for indicators, high beam and horn for Land Rover Defender
suitable for Land Rover Defende from VIN ...WA138480 (Defender TD5 from MY1998) to FIN ...EA999999 (Defender TD4 up to MY2014)
Product number:
NA-XPB101290
Defender door hinge assembly kit, stainless steel (black)
From
€44.90*
Defender door hinge assembly kit, stainless steel (black) The classic Defender’s original door hinges usually become a nuisance sooner or later - they wear out, turn rusty and leave streaks down the paintwork. Our precision-manufactured replacement hinges made of black anodized aluminum provide a permanent remedy, especially in combination with our custom mounting kit. The complete set of screws, nuts, washers and retaining clips is made of stainless steel and is therefore guaranteed to stay rust-free. The fastening materials are specifically made to exactly fit these hinges, thereby preventing contact corrosion between steel and aluminum parts. The screws’ black coloring also ensures a seamless off-road look on your Landy. Please note: The mounting kit does not fit the original Land Rover hinges.
Product number:
MOKI-TUSCH-DEF-2TUEM
Screw retaining bracket injection nozzle Defender TD4 2.2 or TD4 2.4
From
€6.00*
Mounting screw suitable for mounting bracket injection nozzle - Defender TD4 2.2 and 2.4 here in the store Dimensions: 8cm x 2cm x 2cm
Product number:
LR029962M
Bracket injection nozzle Defender TD4 2.2 and 2.4
From
€35.00*
Mounting bracket suitable for injectors - Defender TD4 2.2 / 2.4 from MY2007 onwards suitable screws for mounting can be found here in the store
Product number:
LR058107LRM
Door Hinge Set for Land Rover Defender 90, 110 and 130 from MY 1988 onwards
From
€399.00*
There are a few mods to the classic Landy that anyone can - and should - do themselves. Replacing the original Land Rover door hinges is definitely one of them, as their half-life is notoriously short. The original parts corrode, cause rust streaks on the paintwork, leak or become wobbly. Especially at the tailgate with the heavy spare wheel mounted, the load often becomes too much of a strain for the OEM parts. Sooner or later, they become a nuisance.
But there is a solution: greased replacement hinges from Offroad Monkeys provide a quick and lasting remedy. Made of a high-strength aluminum-titanium alloy and sporting corrosion- and UV-resistant coating, both look and function are ensured for the long term. No more rusting, jamming or sagging hinges, guaranteed! Whether on the side doors or the cargo door, all Offroad Monkey hinges feature a few extremely clever details: Stainless steel bolts with spiral grooves for more effective greasing; removable grease nipples with grub screw replacements; exchangeable bearings/bushings and last but not least perfectly fitting seals to prevent contact corrosion and paint damage. The hinges are 100% Made in Germany, they can be completely disassembled and also be painted.
Front door kit includes:
4 hinges
incl. Seals
Passenger back door kit includes:
4 hinges
incl. Seals
Tailgate kit includes:
3 hinges
Mounting kit incl. Seals
Product number:
TUSCH-DEF-1REIHEM
Retaining clip bonnet support Land Rover Defender Td5 / Td4 up to MY2016
€3.50*
Retaining clip / bonnet bar
Plastic clip bonnet bar for Land Rover Defender Td5 and Td4 up to year of construction 2016
suitable for bar diameter 8mm
Product number:
NA-PRC3180
Lockable fuel filler cap for Land Rover New Defender, including 2 keys
€49.90*
Lockable tank cap
When fuel prices are high, opportunistic fuel thefts skyrocket and this affects us both at home and when traveling abroad. Furthermore - especially in our cities - SUVs and 4x4s are preferred targets for sabotage and vandalism by supposed climate activists and other thugs. Under these circumstances, it is hard to understand why high-priced cars such as the New Defender (from MY2020) do not come with lockable fuel filler caps.
If you want to prevent thieves and saboteurs from gaining easy access to your fuel tank, we offer a lockable replacement cap with two keys.
In addition to the New Defender, this lockable fuel cap fits the following models:
Discovery 3 MY2004-2009Discovery 4 MY2009-2016Discovery5 from MY2014Discovery Sport Typ LC ab BJ2015
Range Rover (not Vogue) from MY2007Range Rover Evoque L538 MY2011-2018Range Rover Hybrid L405 from MY2013Ranger Rover Sport from MY2007Range Rover Velar from MY2017
Defender from MY2020
Jaguar E-Pace X540 from MY2017Jaguar F-Pace X761 from MY2016Jaguar F-Type (not USA) X152 from MY2013Jaguar XE from MY2015Jaguar XF from MY2007Jaguar XJ X351 MY2010-2019Jaguar XK Cabrio from MY2006Jaguar XK Coupe from MY2006
Product number:
TADE-NEWDEF
Fuel filler cap for Land Rover Defender TD4 and TD5
€129.00*
Fuel cap lockable
Matte black, resistant to corrosion and UV exposure and featuring a classic design - the Offroad Monkeys’ fuel cap is a real upgrade for classic Landies Td5/Td4 and a whole range of other models from the Alfa Romeo GTV (up to MY 2005) to the Volvo XC70 (from MY 2007). Made of high-strength aluminum, this replacement fuel cap is simply perfect in form and function. Very easy on the eye and very pleasant to handle, it is of course lockable as well. 100% Made in Germany.
Delivery includes 2 keys.
Note: the filler cap does not fit the new Defender models from Bj. 2020 (new series)
Product number:
TADE-TD45
Gasket set for Alpine windows for Defender from MY1990 to 2016
€38.00*
Gasket set for Alpine windows for Defender from MY1990 to 2016
Usually suitable for Defender from MY1990 onwards
here the 4mm thick window was installed ex works (the thicker window with 5mm was usually only installed on series and Defender up to MY1990). If you are unsure, measure the thickness of the disc.
Scope of delivery:
1 piece gasket for Alpine window
1 piece filler strip for Alpine window
Product number:
DIALPIFE
Oil seal crankshaft rear Defender TD4 2.4 and 2.2, for Defender from MY 2007 onwards
€46.00*
Oil seal crankshaft rear
Fits DEFENDER 2007 and later.
Product number:
LR020610
Retrofit kit / wiring harness for heated windshield on Defender (until MY2016)
€339.00*
Heated windshield wire harness complete with Carling Contura switch for Defender equipped with OEM style heated windshields with two tabs or wires - one in each corner. Carling switch will require assembly. The kit requires minimal connections such as positive and negative terminals, ignition power and lighting power. The kit is rated at 20 amps with a turn-on time of approximately ten minutes and is suitable for use with the heated window part number CMB000411 or equivalent. The power cable is 500 mm long and is terminated with M8 rings from the relay set to the battery. The supply cable for the heated screen is 3000 mm long and terminates with an insulated lug socket. The screen grounding cable is 500 mm long and is supplied with a cable lug socket and an M8 ring terminal. suitable for heated windshield here in the store.
Product number:
KASA-WISCHU
LOF Clutches Brake Pads Series 2a&3 for 1 Axle, 11" or 10"
From
€69.00*
LOF Brake Shoe - Complete Axle Set
Description:A set of 4 brake shoes to overhaul 1 complete axle on a 10" / 11" Series 2A / Series 3 Land Rover.The shape and precision of the brake shoes match the drums, with a brake compound designed to combat squeaking and judder! All stock owners will know what is meant! Also, the shoes have been fitted with a solid, correctly shaped post rivet to hold the spring in place, you will know that cheaper brands have a straight cut rivet that tends to fall out!
Notes on Defender brake parts:all brake pads offered for the Defender have an R90 designation and are therefore registration free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with R90 identification.
Product number:
S3-SHOESM
LOF Clutches POWERspec Brake Pads for Defender
From
€69.00*
4x Brake Pads - LOF Brake Pad and Mounting Kit
POWERspec brake pads:
LOF POWERspec brake pads are designed for tuned and modified hard working axles.High braking power, improved coefficient of friction (0.57). Designed for fast road use to stop heavily loaded vehicles, including tractors.POWERspec brake pads have edge chamfers that reduce noise but do not reduce service life, uncoated, minimal scattering required. The pads have a noise reducing washer on the back of the pad.
Notes on Defender brake parts:
All brake pads offered for the Defender have an R90 designation and are therefore registration-free.Brake discs are also registration-free, as only vehicles homologated from 2016 onwards require brake discs with an R90 designation.
1. LOF brake pad mounting kit for : Defender 90/110/130 front axle (MY1994-2016)
What is included in the kit?
4x LOF 50V brake pads (ROAD/POWER)
1x STC8575 installation kit
1x LOF Ceratec brake grease
2. LOF brake pad installation kit for : Defender 110/130 rear axle (MY 1998-2016)
What is included in the kit?
4x LOF 110 brake pads (ROAD/POWER)
1x 4105 mounting kit
1x LOF Ceratec brake grease
3. LOF brake pad mounting kit for : Defender 90 rear axle (MY 1994-2016)
What is included in the kit?
4x LOF 90 brake pads (ROAD/POWER)
1x STC8574 mounting kit
1x LOF Ceratec brake grease
Product number:
DEF-90-REAR-POWERPADM
Axle stop rubber for Land Rover Defender
From
€12.50*
Axle stop rubber for Land Rover Defender up to BJ 2016
Specification:
Category: Axles and Suspension
Engines: All
Fuel: Diesel, Petrol
Premium range: ANR4188G: Yes / ANR4189: No
Transmission: Manual, Automatic
Specification NAS - North American Specification, NOT-NAS - Non North American Specification
Quality rating: 100
Drive Type: Drive Wheel 2WD - Two Wheel Drive, 4WD - Four Wheel Drive
Fits DEFENDER 1986 - 2006, DEFENDER 2007 AFTER, DISCOVERY 1 1989 - 1998 and RANGE ROVER CLASSIC.
Product number:
ANR4188GM
Shift Linkage Repair Kit Transfer Case for Land Rover Defender
From
€39.00*
Repair kit shift linkage / transfer case
The transfer box on a Defender not only transmits the power from the engine two both axles, it also houses the middle diff lock as well as the reduction gearbox. The linkage connecting the transfer box to the low ratio/diff lock stick is naturally prone to heavy wear and tear. The repair kits give you the option to completely replace all worn bushes, bolts and the hexagon screw in the linkage. Nut, washers and SL retaining clips for the bolts are all included.
Please note:
Repair kit (REPSET-VEGE-LA) is compatible up to chassis-nr. LA999999 (ca. MY1994)
Repair kit (REPSET-VEGE-MA) is compatible from chassis-nr. MA000000 (ca. MY1995)
Product number:
REPSET-VEGE-LAM
Galvanized doors for Land Rover Defender from 1983-2016 in Land Rover series style
From
€1,990.00*
Galvanised doors for Land Rover Defender from model year 1983-2016 in Land Rover Series Style
Everything was better in the past? Not necessarily, but these Defender conversion kits for Series 2/3 style doors are not only for retro fans but definitely add a lot of quality and functionality that has become lost along the way in the standard Defender doors from model year 1983 onwards.
So, what are the advantages that these Series-style two-part doors have over the Defender originals? Apart from the fact that they come considerably cheaper, most of the pros lie in the design and the construction of the two-piece doors. For a start, the lift-up handle is recessed and doesn’t protrude as with the plastic push-button handle on the standard doors. This improves safety because they won’t catch on obstacles while off-roading or navigating narrow passages. The lift-up handles also grant better theft prevention as they come with a stronger locking mechanism. Furthermore, the door’s design also creates more space inside the cab, a fact that tall drivers will appreciate immensely. Soft top models, especially, will profit from the completely removable door tops. The slide windows themselves offer quality glazing and one thing you never need to worry about again is the winding mechanism underneath the door trim.
In terms of quality and assembly these conversion kits leave nothing to be desired. The frames of door tops and the bottoms are hot-dip galvanized and the aluminum skins adhere to original factory specs. The split retro doors will fit all Defender Models from 90s to 130s and model years from 1983 to 2016. They come with all the required fastenings, handles, locks, strikers and seals. Standard functions of the original doors like car alarm contacts and automatic interior light switch are accommodated for. The only modification required is the drilling of two new holes each for the strikers, because they are differently positioned due to the different locking mechanism. However, we will include a drilling template.
The conversion kits are available in pairs for front and/or back seats.
Product number:
VERZITUE-VOM
Repair plate set B-pillar and C-pillar 3-piece, left or right side for Defender 110
From
€1,049.00*
The areas around the doors are corrosion hotbeds in a Defender. Even though this is a well-known fact, the rust remains very often undetected and keeps eating into structural components and body panels. The doors feature many corners, angles and surfaces that constantly trap water and wet dirt. Screw fittings, rivets, welding points, the combination of different materials like steel, aluminum and rubber as well as mechanical stress often exacerbate the problem.
If you are facing large scale restoration work in your 4/5 door Defender, you might consider whether a complete replacement of B and C pillars as well as the door sill isn’t the cheaper, quicker and most of all more thorough solution. We are offering entire sets for the right or left side of all models where door seals are only pushed in and not riveted. If you have riveted seals, they need to be adapted. If you need to replace only the C posts you can find them here.
Product number:
DA4787M
Repair plate C-pillar left or left side for Defender 110/130
From
€239.00*
Reparaturblech C-Säule für Defender 110/130 Rost sucht sich gerne Winkel und Ecken, die dauerhaft Wasser und feuchtem Schmutz ausgesetzt sind. Kein Wunder, dass beim Defender die Türbereiche besonders betroffen sind. Deswegen ist die C-Säule bei 4/5-Türern so ein Bauteil, das bei Restaurationen sehr oft zum Austausch ansteht. An den Befestigungen, den Unterseiten sowie in den Spalten zwischen Streben und Karosserieblechen entstehen hier versteckte Korrosionsherde, die schnell zu kritischen Schäden führen können. Bevor umfangreiche Restaurationsarbeiten mit Flex und Schweißgerät unternommen werden, ist es oft besser, gleich das komplette Bauteil zu wechseln. Wir bieten die C-Säule jeweils einzeln für die rechte oder linke Seite, passend für alle Modelle, bei denen die Türdichtung nur eingesetzt und nicht angenietet ist. Bei vernieteten Dichtungen, müssen die Dichtungen angepasst werden. Wer gleich den ganzen Türrahmenbereich mit B- und C-Säule sowie dem Türschweller tauschen möchte, findet das ganze Set hier. Geeignet für alle Baujahre.
Product number:
DA4785M
Tiger Seal adhesive and sealant
From
€8.00*
Tiger Seal adhesive and sealant
U-POL is second to none when it comes to coatings, adhesives and fillers for automotive applications. Especially in the off-road sector, U-POL products like RAPTOR protective coating are the go-to solution of choice. Tiger Seal™ by U-POL is a one component ready-to-use sealant and adhesive for bonding, sealing and waterproofing of auto panels, trims or seams and the wide range of customizing projects for off-road, camping and expedition vehicles.
Tiger Seal™ bonds firmly and permanently to most materials encountered in automotive, marine or domestic applications: steel, aluminium, galvanized metal, most plastics, fibre glass, glass, wood and many others. As a moisture curing polyurethane, Tiger Seal™ stays permanently flexible and doesn’t shrink after curing
These unique PU features give Tiger Seal™ the edge over other sealant types, because car parts are constantly subject to considerable mechanical and thermal stresses. Whereas rigid sealants and adhesives become porous and brittle after time due to tension, vibration or thermal expansion/contraction issues, Tiger Seal™ bonds and seals permanently.
Tiger Seal™ cartridges fit standard caulking guns and the product is very easy to apply. It doesn’t expand or foam and can be immediately painted over with most water or solvent based coatings. This is one of the main advantages over silicone-based products.
Please refer to the application and safety instructions and always wear appropriate personal safety equipment. Tiger Seal™ contains harmful isocyanates, which may cause allergic reactions and respiratory problems when inhaled.
Size: 310 mlColor: Black, white, grey
Product number:
TIGERSEAL-BLKM
Door Hinge Set for Land Rover Defender until MY2016 and Series 3 in Polished Stainless Steel
From
€477.00*
Polished stainless steel door hinge set for Land Rover Defender until MY2016 and Series 3
Enhance the appearance of your Land Rover!
Door hinge set for front doors or 2nd row doors for Land Rover Defender until MY 2016 and Series III.
These hinges are cast from 316 stainless steel and polished. They have the same footprint as the original door hinges. 4 hinges, 2 of which contain the holes for mounting the exterior mirror.Mounting material included.
Product number:
DA1951M
Wishbones kit for Land Rover Discovery 3 & 4
From
€950.00*
Wishbone Kit för Land Rover Discovery 3 & 4
The wishbones in your car are solid and fairly robust components and are doing a heavy job in the wheel suspension. The transverse arms are usually made from solid metal or welded sheet components. It takes forceful physical impact, as in accidents or when hitting rocks while offroading, to actually damage them.
What makes wishbones subject to wear and tear and eventual degradation are the bearings and rubber bushes, which are firmly attached to the metal for safety reasons. Once the rubber becomes porous or starts to tear, the wishbone becomes too slack and can cause further damage, ultimately making your car unsafe to drive. That’s why damaged wishbones should be replaced in time. Allowing for the relative cheapness of the metal components and the difficulty to replace only the rubber bushes, it is recommended to exchange the wishbones as a whole.
In Discovery 3’s and 4’s the wishbones are especially prone to degradation due to the heavy weight of the car. Damage can appear already after relatively low mileage. We are providing front and rear wishbone kits for Discos separately or in a bundle with a complete set of wheel bearings. Our kits contain original Land Rover parts as well as high performance components by Meyle, some of them reinforced for armored cars.
Product number:
QUERKIT-HAM
Doors primed, suitable for Defender TD4
From
€960.00*
Doors for Land Rover Defender
Suitable for Defender TD4 2007 onwards
The doors are primed.
Available for front, back, left and right - Please choos the desired variant.
Product number:
LR029311M
Door Hinge Set, all Defender, front and rear
From
€99.00*
Door hinge set for front doors for all Defender / Series3
Door hinge set for rear door for all Defender, Series 2 & 3
Door Hinge Set for Middle (2nd) Door Row for all Defender
Steel fixing bolt set included in delivery
Product number:
TSD-VTM
Steering knuckle repair kit Defender
From
€535.00*
Steering knuckle repair kit Defender from MY99.
Please select the appropriate variant that you need.
Important Information:This set is only for one side, if you need it for the complete axis, please order 2 times.
Product number:
ASRSDEFM
Service-Kit for Land Rover Defender Td4
From
€43.00*
Service Kit for Land Rover Defender Td4
Just one order number and you have all the replacement parts for a complete service on your Land Rover Defender 90/110/130 with TD4 engine (2.4 or 2.2 litre). Never again have to interrupt a service because you forgot to order all the necessary parts too! This service kit contains high quality products manufactured to O.E. specifications, but still offered here at a very attractive price.Contents: Oil filter (optional LR058104 for 2.2 from DA444247 OR LR004459 for 2.2 and 2.4 up to DA444246). Fuel filter Air filter Oil drain plug with rubber gasketThe use of a fuel breather pump is essential for the correct replacement of the fuel filter, otherwise the high-pressure pump of the common rail system will inevitably be damaged or even destroyed.
Product number:
SKTDETD4-22M
Continental Flat-blade Windscreen Wiper for Land Rover Defender, Set
From
€34.00*
Continental Flat Blade Wiper
Windscreen wipers in original equipment quality, optimum wiping performance due to even pressure from the symmetrical spoiler and particularly quiet due to the flat design.
The set consists of either two or three identical wipers for the front and rear windscreen of your Land Rover Defender 90/110/130.
Replacing the wipers is child's play thanks to the quick-fit adapter - it is installed with just one click.
Translated with www.DeepL.com/Translator (free version)
Product number:
FBWDEF-2M
Tank protection plate for Land Rover Defender
€270.00*
The tank protection plate for the Land Rover Defender 90/110/130 of the Td5 and Td4 series (2.4 and 2.2) protects the entire width of the tank from dents, damage and leaks during off-road use. This prevents vehicle downtime and costly environmental damage.
The tank protection plate can be used in conjunction with standard trailer couplings. It is made of weight-optimised, 6 mm thick, anodised aluminium.
Please select your vehicle type below.
Product number:
TSPLRDEF-90M
Replacement gasket set 4pcs for Aschcroft intermediate shaft MT82
€45.00*
Spare gasket set 4 pcs. for Aschcroft MT82 intermediate shaft
2 pieces precision O-ring 43,82 x 5,33mm2 pieces precision O-ring 75 x 2mm
Product number:
ERS-DISA-ZWIWE
profile for body rear or rear tub, 3-pcs
€129.00*
profile for body rear or rear tub, 3-pcs
Spray from wet roads, rain water, dirt, chemicals and mechanical stress all take their toll on the rear of the classic Defender (up to MY 2016) and the Land Rover Series III, especially on the trim strip under the edge of the tail gate. This aluminum profile helps to seal the door and the cargo hold, it protects the loading edge and also holds down the carpet or floor mat in the cargo area. No wonder that it frequently has to be replaced, whether it’s for visual defects or functional degradation. Our replacement profile matches the Land Rover OEM part (AQR710020) in form, function and quality, but offers a lot more value for money, as it only costs about half as much.
Product number:
WILEI-KAROHECK