Spare parts kit for mobile parking heaters. To ensure that your parking heater remains watertight, you will receive the common wear parts here. Set consists of: 3x rubber plugs 2x O-rings 2x thread caps 1x storage bag

End piece for warm air hose WALUFLEX Our 60 mm Flexi pipes for parking heaters are the perfect solution for transporting warmth and cosiness from A to B, whereby B can be one of our roof tents, a cold mountain hut or whatever else needs to be heated off-grid. The warm air pipes can be cut to any length and to ensure that the pipe ends are cleanly sealed or can be easily and airtightly extended, we have a silicone adapter for easy ratcheting. The adapter is the icing on the cake for our hot air ducts. It might work without, but it's definitely better with. For one thing, it is safer for people, equipment or cars because the edges, fringes and wire ends of the cut pipe disappear under the silicone cover and therefore have no chance of scratching, pricking or tearing. It is also very practical: one end of the silicone adapter is semi-permanently attached to the cut-off pipe with one of the cable ties supplied. The other end of the adapter can then be tightened to a connection or extension as required using the ratchet clamp (ideal for our parking heaters). Without the ratchet, the silicone adapter, which only makes the pipe 5 mm thicker, is a perfect and aesthetically pleasing end sleeve. After all, the eye camps with you and who wants to look at fraying pipe ends.    

Kabel mit Stecker für Zigarettenanzünder Suitable for our small mobile parking heater. 4 m cable  Plug for cigarette lighter Please note:  The plug can be loaded up to 16 A. The socket MUST also be rated up to 16 A. 

combiBOIL hot water boiler for campers - More heating options & functions thanks to full Autoterm integration combiBOIL - One boiler, all optionscombiBOIL is unique in its market segment in terms of quality and range of functions.It offers three different options for water heating: With an electric heating cartridge. Using hot air from a parking heater. Via integration into the engine cooling circuit / with a water heater The combination of these options offers maximum flexibility and efficiency in various areas of application. Monitored and controlled by Autoterm Comfort Boiler Control: The Autoterm Comfort Boiler Control control panel (a further development of the Comfort Control) is specially designed for Autoterm heaters and combiBOIL hot water boilers to work together.The integrated thermostat function in the versions with 12V /230V heating elements enables extremely convenient and safe operation of the hot water system. All heating control options are retained. Your advantages: Display of the water temperature in real time, even on the SleepScreen Water temperature can be preset from 50 - 80 °C Adjustable hysteresis to 5 - 25 °C from the target temperature Overheating protection (configurable): Heating switches off automatically before the water temperature reaches a critical point. Normally, a control flap is no longer required to regulate the boiler. Frost protection: If the water temperature drops to 2 °C, the heating system automatically heats the water to +15 °C and the ambient air to +7 °C. The boiler and water pipes are reliably protected against frost damage. The Autoterm Comfort Boiler Control is only available as an option in combination with the combiBOIL hot water boiler - please select accordingly when ordering. Note:Autoterm Comfort Control and Autoterm Comfort Boiler Control differ in terms of hardware and software. The standard Comfort Control cannot be updated to the boiler monitoring functions.Goodbye control flapThanks to the possibility of controlling and monitoring the boiler temperature, regulation via a Y-piece / control flap is finally superfluous. Before a critical temperature is reached, the heating can be automatically switched from the current heating mode to ventilation in order to lower the boiler temperature. The rapid cooling achieved in this way enables the heating mode to be restarted before a clearly noticeable reduction in the room temperature occurs.A control damper may still be useful only in the case of extreme temperature requirements (e.g. sub-zero temperatures in the double-digit range with sub-optimal thermal insulation). Couple or large family - as much hot water as you needThe combiBOIL is available in three sizes. With volumes of 7, 9 or 12 liters, it always heats enough hot water, but not unnecessarily much. At a temperature of just under 60 °C in the boiler, 7 liters of water provide enough pleasantly tempered shower water for two people. Use with other heatersIt is not absolutely necessary to use an Autoterm heater to operate the combiBOIL hot water boiler. The hot air flow for hot water production can also be generated by other heaters.In this case, however, the integration of temperature measurement and the corresponding safety functions must be dispensed with, as the use of the Autoterm control panel requires connection to a corresponding heater. A control flap and its manual operation are then a prerequisite for safe operation.

Conversion kit for independent mobile heating system A independent mobile heating system is something great. In everyday use, this is repeatedly exposed to splashing water, rain, snow, etc. To benefit from the heating system for a long time, we have decided to put together a conversion kit. With this conversion kit you make your mobile parking heater waterproof. Consisting of:2 x threaded caps2 x rubber stoppers2 x O-rings2 x side wall duct 24 mm2 x air duct 60 mm

Heater piping / flexible piping / air pipe for efficient distribution of heater air. The piping is specially tailored to suit the AUTOTERM (=Planar) 2D auxiliary vehicle heater, but also fits Webasto, Eberspächer and Truma heaters. Supplied according to stock, i.e. you can reveive either black. Colour: silver inner with either blackDiameter: Ø 60 mmPrice per meter, only sold in full meter lengths Example: You need 3 meters of this hose, add this article to your shopping basket 3 times.Please note: a maximum of 10 metres can be supplied in one piece. If you order 20 metres, for example, you will receive 2x10 metres. Individual pipe sections can be connected with the pipe connector without any problems.

Mobile parking heater with aluminum box, various versions Make way, here comes the second generation of our mobile parking heaters in a box! We have packed even more technology, even more experience and even more customer feedback into our new mobile heating boxes. If you are looking for a small, self-sufficient and portable heat source with unrivaled capacity for cold days and nights in unheated outdoor shelters or temporary accommodation, you get everything you need (or want) in a small, weatherproof aluminum box. Available in three modular versions with different configurations, the Nakatanenga heating box provides the perfect, independent heat source for tents, gazebos, garden sheds, mountain huts, snack stands, stalls and much more. The heart of the mobile parking heater is the Autoterm Luft 2D, a diesel-powered air heater with a maximum heat output of 1.8 kW and a diesel consumption of just under a quarter of a liter per hour at full power. With a tank capacity of 18 liters in the twin-tank version, this means that it can heat at full throttle for over 70 hours. The economical unit, which is also very quiet at 55 dB thanks to the exhaust silencer, is controlled by a digital control unit with timer in the version with two batteries and can also be switched on and off by radio remote control. This allows you to preheat your camper, roof tent, caravan or hunting lodge in good time for getting up or for the evening, for example, and operate it from the place where you are staying or sleeping inside*. In contrast to the previous models, the three versions of our mobile parking heater are now only available in one box size, namely 42 liters. This is significantly more compact than the old version in the large version and only slightly more voluminous than the small model from before. What is the advantage? The new universal crate has a modular interior with a powerful performance. Depending on whether you need tanks, batteries or both in the box, you can choose the appropriate version when purchasing: with 9.2 L single or 18.4 L double tank, each without battery, as well as with single tank, two batteries and digital control. However, it can also be easily retrofitted or converted if requirements change. This is made possible by elaborately designed brackets in the box and the use of specially manufactured, made-to-measure tanks.   Features of heating box 1 and 2 (without battery) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- PU5 control panel (without timer and storage options)- 12 V connection socket for supplied pole terminal cable- Alternatively, a cable for cigarette lighter (KMSH cable) can be used- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”   Features of heater box 3 (with 2 AGM batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)   Equipment of heating box 4 (with 1 LiFePo battery) - USB interface for charging smartphone, power bank, tablet etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)-> Please only use LiFePo-compatible chargers Equipment of heating box 5 (with 2 LiFePo batteries) - USB interface for charging smartphone, power bank, tablet, etc.- Capacity display- Comfort Control control panel (with timer and memory option)- SAE connection socket (suitable for Optimate chargers or Optimate solar charger)- 2 radio remote controls- Connection option for external temperature sensor (the connection is inside the box, not outside)”-> please only use LiFePo-compatible chargers The warm air is transported via a firmly screw-fastened, waterproof Flexi hose. As the warm air hose is different for every user and every requirement, we do not include a standard length, but leave it up to you to order the desired length separately here in the store, with or without a silicone sleeve. You can find the perfect storage bag for the Flexi hose here in the store. Regardless of the configuration, the mobile parking heaters are always easy to transport and make the difference between experiencing and suffering in the cold seasons. Whether it's an aurora safari, selling cookies at the Christmas market or winter camping in a roof tent, nothing is really fun if you freeze to death. *ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. In addition, for optimum heating performance, make sure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. Dimensions Internal dimensions 550x350x220 mm External dimensions 580x380x240 mm Empty weight: 2 tanks, without battery: 18 kg 1 tank, without battery: 16 kg 1 tank, 2 batteries: 36 kg Depending on how many starts are made, the battery lasts at least 40 h, but more likely between 60 and 70 h.  LiFePo4 batteries - i.e. batteries with a lithium iron phosphate cathode - are the ideal supply batteries for camping or electrical work on the move. In contrast to conventional lead-acid AGM technology, lithium batteries combine superior charging properties with much lower weight and volume and a long service life. LiFePo4 batteries can be deep-discharged without any problems, which sooner or later leads to irreparable damage with AGM batteries, as the rule of thumb here is that you should never draw more than 50% charge. If you are not dependent on the greater cold tolerance of AGM batteries, you should definitely consider the higher costs for LiFePo4 batteries and compatible charging technology. The weight and space savings, the long service life and the uncomplicated discharging and charging of the battery are strong arguments in favor of the investment. What's more, LiFePo4 technology is also extremely safe And a special note on aluminum: Although we take the utmost care during storage and shipping, as with all our products, aluminum boxes can always show minimal scratches, stains, dents or other surface features upon delivery. These are material-related and result from the specific properties of the light metal.  In contact with oxygen, aluminum forms a natural, corrosion-protecting patina and is also relatively soft compared to steel, which is three times heavier. This makes the material ideal for use in sheet metal, especially when weight and resistance are important. On the other hand, however, it also means that aluminum can never be completely free of patina or other marks, even on delivery: Small scratches, stains etc. therefore do not constitute grounds for complaint. Ultimately, aluminum boxes are intended to be robust objects of daily use. Like everything that is actively used, they develop an individual patina and every trace of use tells a story. So, have fun with it! Please note the variants without batteries:  Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating mobile parking heaters. The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this. Suitable battery boxes for operating the mobile parking heater              

Installation accessories for parking heater boilers We recommend the following accessories for connecting the boiler and the heater: Pressure reducer adjustable 1-5.5 bar with pressure gauge and 2x hose nozzle 10mm Protect the sensitive components (boiler, drinking water filter, but also e.g. simple plastic pipe connections) of your pressurized water system. With a maximum inlet pressure of 16 bar, this pressure regulator with pressure gauge can also cope with the most powerful pressurized water pumps in touring vehicles and boats. Its outlet pressure is infinitely adjustable between 1 and 5.5 bar.Specifications: Max. Operating pressure, inlet side: 16 bar Pressure setting range, outlet side: 1 - 5.5 bar Factory setting: 3 bar Max. Max. operating temperature: 80 °C Pressure gauge scale: 0 - 10 bar Operating medium: Water Connections 1/2" and 1" female thread (ISO 228-1) Length incl. hose nozzles: 139 mm Scope of delivery: Adjustable pressure reducer 2 x hose nozzle 10 mm Pressure gauge   Water pressure system - pressurized water pump & pressurized storage tank 12V in a set The heavy duty water pressure pump with bypass system, 4 bar pressure and 18 liters flow rate per minute and the 1 liter accumulator tank are the ideal combination for your pressurized water system.Together they enable smooth operation with sufficient water pressure - even when filtering.Reduced pump cycles also lead to a long service life. Its ease of repair also makes the pump a sustainable choice.Scope of delivery: Accumulator tank Pressurized water pump Pre-filter 4x 10 mm 1/2" NPT connection nozzles   Adapter Webasto hot air duct 60mm to 90mm Attention: 90mm inner diameter. A 90mm warm air pipe will not fit. In this case, a 90mm pipe connector (ArtNo. 18067) must be used. This adapter suitable for rather rare applications such as adapting 60mm hot air pipe to e.g. boilers with 90mm connection. Please note that you should never reduce the throughput of the hot air pipework of an air heater (i.e. do not reduce from 90mm to 60mm). Note: further installation accessories for parking heater boilers can be found HERE in the store.

Installation accessories PUNDMANN THERMAIR 6 and 9 for connecting the boiler and the heater we recommend the following accessories: Radio remote control: range approx. 100 metres, suitable for all AUTOTERM Air heaters. Y-piece: 60x60x60 adjustable Bowden cable: for adjustable Y-piece Thermo mixing valve External temperature sensor: for measuring the temperature at a specific location - length 5metres Pressure reducer: adjustable with manometer, pressure indicator Brass hose connector: ø 10mm, external thread 1/2 'inch Brass T-piece hose connector: ø 10mm Drinking water hose BLUE: ø 10mm, sold per metre Drinking water hose RED: ø 10mm, sold per metre Water pump: 12V Check valve Please order the accessories that suit you separately!  

Hot water - Always and everywhere At home, you have warm water coming out of your taps, just like that. That’s why armchair travelers never really appreciate what a precious commodity that is. But if you spend enough time on the road or in nature – be it in a camper van, on a boat, in a food truck or a market stall – you will know what a truly great thing water is when it flows clean and warm wherever and whenever you need it. If you already have a diesel heater installed in your vehicle, boat or trailer – by AUTOTERM or an equivalent – you can easily upgrade to a warm water system. Pundmann have designed their mobile water heaters, the 6-liter Therm 6AIR and the 9 liter Therm 9AIR, specifically for AUTOTERM diesel heaters. Accordingly, installation is completely hassle-free. If you have a 230V power outlet available, you can run the water heater with the inbuilt 500W heating element. Whenever there is no electricity nearby, simply let your Autoterm (or equivalent) do the job of heating your water. It will take 50 minutes for the smaller 6-liter tank and 60 minutes for the larger tank. Operating pressure is at 1.5 bar/21.75 psi with a security valve limiting pressure to 2.2 bar/31.9 psi. Dimensions of 200 x 228 x 360 (6 l) or 200 x 228 x 520 (9 l) mm, respectively, make the tanks small enough to fit even in tight spaces. Mounting plates, adapters, pipes, mixing taps and other accessories can be found here. Last but not least, the tanks are made from stainless steel and meet food safety standards The article is suitable for any parking heater (gasoline, diesel, gas) from 2kw.

Autoterm Push Control S and L The Autoterm Push Control is a compact and easy-to-use switch for controlling Autoterm parking heaters. It enables different operating modes and functions depending on the heater. It also fulfils a long-held customer wish to be able to connect two control units to one heater - so the heater can be started conveniently from the driver's cab, for example, while the standard control unit is installed in the living area. NEW: The Autoterm Push Control enables simple control of air and water level heaters and, for the first time, the option of connecting two control panels to one heater! FunctionsOperating modes for air heatersPower mode (standard mode): With a single or multiple click, you can choose between five fixed power levels. The colour of the LED ring indicates which power level the heater is currently inTemperature mode: In conjunction with an external temperature sensor, a temperature of 18, 21 or 25 degrees can be achieved and maintained. "Maximum power" can also be set as the highest level in temperature mode. Operating modes for water level heatersPreheating mode: The heater runs until a certain coolant temperature is reached, then switches off the burner and restarts when the temperature drops. Here you can choose between a heating time limited to two hours or continuous operation. Simple installationThe Push Control comes in a plug-and-play design with an included control module and connection cable for quick and easy integration. Dual controlfinally possible: The Push Control can be used as the sole control element for your heating system or combined with the Autoterm Comfort Control control panel to enable dual control for a single heating system. This makes it easy to operate your parking heater in different areas of the vehicle and ensures maximum user comfort. Robust and waterproofStainless steel housing with IP67 protection class, making the switch waterproof and safe and durable even under extreme conditions. CompatibilitySuitable for Autoterm Air heaters (2D, 4D, 8D, 9D) and Autoterm Flow heaters (5D, 5B, 14D). Available in two versions:Variant S: 6 mm thread with Molex plugVariant L: 12 mm thread with round plugDimensions for both switches:Diameter of the button surface 25 mm each.Thread diameter 22 mm each.  

Mobile parking heater without battery and in aluminium box You can find information on hire equipment below. “It's a Thin Line Between Love and Hate” is the old song and this thin line between loving and hating the same thing is definitely the line on the thermometer in winter. If you freeze off the part of your body with an A, you're guaranteed not to enjoy even the fattest fish at the ice hole, the most magical aurora borealis or the greatest fun at the elephant meeting. That's why we have our solution for all outdoor activities in the cold seasons in the Alubox Pro: the AUTOTERM parking heater for on the go! With the exception of the battery, everything you, your family or your crew need for a warm and cozy outdoor feeling in your car, camper or roof tent is in the ultra-robust, waterproof 29L box. At its heart is the affordable and powerful AUTOTERM (Planar) 2D12 air heater, which can be powered from the vehicle battery via the cigarette lighter adapter. It is controlled via the PU5 control element. A 5.4 l fuel tank is already integrated in the box. This makes our mini heater ideal for on the road and mobile use on the vehicle or wherever a weatherproof cable connection to a car battery can be established. The warm air is transported into the room to be heated via a firmly screw-fastened, waterproof Flexi hose, which can be ordered separately in the desired length here in the store. ATTENTION: As a precaution, we would like to point out that operation in closed rooms is not permitted due to the risk of poisoning from exhaust fumes. Furthermore, for optimum heating performance, care should be taken to ensure that the air inlets for combustion and hot air are positioned so that they are protected from the weather. You can find the perfect storage bag for the Flexi hose here in the store.A larger standalone version of this parking heater with integrated battery is available here. You can also hire this parking heater from us.  Alu-Box Pro (29 liters) waterproof/dustproof according to IP54 standard AUTOTERM (Planar) 2D diesel / air heater ✔ Fuel tank (5.4 liters)✔ Hot air pipe connection, non-return valve, outlet and inlet feed-through✔ Including radio remote control✔ The openings for supply and exhaust air and for the power supply are splash-proof (can be closed with a screw cap or rubber plug)Dimensions of the aluminum box: WxHxD 390x340x290mmDimensions of the box with spigot: WxHxD 490x340x290Total weight: 11.2 kgTechnical data of the parking heater:- Fuel type: Diesel- Heating output: max. 1.8kW, min. 0.8kW- Volume of heated air: max. 75m³/h, min. 34m³/h- Fuel consumption during operation: max. 0.24l/h, min. 0.1 l/h- Power consumption during operation: max. 29W, min. 10W- Manual start/stop- Connection to a car battery or another external 12V battery PU-5 control element: - LED for ventilation display- LED for operating display- Temperature adjustable via rotary control The AUTOTERM Air 2D (Planar 2D) is equipped with an altitude kit! This means that the heater automatically reduces the injection volume according to the ambient air pressure. This reduces or prevents sooting of the combustion chamber when the air oxygen content falls. The maximum heat output decreases in proportion to the amount of oxygen in the air. Roughly speaking, from 2000 meters upwards, the loss of output per 500m altitude is approx. 5%. Manufacturer tests up to 3440m were problem-free. No problems are to be expected up to 4000m. Up to 5000m the software calculates itself - but this could not yet be tested at real altitude. Please note: Most portable power stations or battery boxes (such as Goal Zero, Eco Flow, Bluetti etc.) are unfortunately not suitable for operating the mobile parking heaters.The heater requires up to 15A as starting current and when shutting down, but very few battery boxes can provide this..In general, however, direct connection to the battery terminals is the best solution      

Warm shower kit 2.0 - Autoterm parking heater + combiBOIL with Comfort Boiler Control The original from tigerexped - but now even better! The Warm Shower Kit is the simple way to equip touring vehicles or boats & yachts with a hot air heater and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. How does the Warm Shower Kit 2.0 work:The Warm Shower Kit 2.0 can generate hot water in three different ways: Via an electric heating element, which means via electricity if you have just enough reserves, or are connected to shore power.Simply on the side when the heating is running - without consuming any additional energy. Hot water is the "waste product", so to speak.NEW: The boiler can be integrated into the engine's cooling water circuit to heat either the service water itself or a second water loop. Conversely, the engine can also be preheated to make starting more gentle (not suitable for use in arctic temperature ranges).Each of these three options has its advantages and can be used when it suits best. After a few days of self-sufficient camping in hot weather, for example, you don't want to leave the heating on, nor do you want to heat up the water from driving. However, if it is too warm for the heating, there is probably enough solar power in the batteries to generate hot water via the electric heating element. With the combination of three options, this kit always offers the one that fits perfectly in every situation. The options for integration into the cooling water circuit are as follows: Cooling water circuit heats the service water, i.e. the cooling water circuit is connected to the boiler and heats service water for showers etc. while driving. (Caution: As the temperature of the cooling water can rise above 100°C (due to pressure), the boiler must be prevented from overheating by means of a valve or by switching off the circulation pump).The boiler preheats the cooling water circuit (engine), which means that the above function is reversed. The engine cooling circuit can be preheated by connecting the boiler to a 230V/110V power source or by using hot air from the parking heater.Heating a second water loop, whereby the energy that is fed into the boiler via the electric heating element or hot air is fed into a second water circuit via a circulation pump. It is also possible to combine the two water circuits (so that the cooling water circuit heats the second water loop), although precautions must be taken with regard to the flow temperature from the motor. NEW: Integration of a second water loopWith combiBOIL it is possible to operate a second water loop with hot water. For example, underfloor heating or towel radiators can be implemented to make it easier to dry wet clothes and towels in the vehicle. Please note that an expansion tank must be integrated into the water loop and, depending on the application, the water may need to be circulated by a circulation pump. Scope of delivery:The Warm Shower Kit 2.0 consists of two main components (heater and boiler) and material to connect and install them to create a perfectly functioning system.

Warm shower upgrade kit 2.0 - combiBOIL with Comfort Boiler Control control panel This upgrade kit turns your existing / installed air heater into an integrated complete system for heating and hot water. It contains all the necessary connecting parts between the heater and boiler and all the components you will need to install the system. Since its development by us in 2017, the Warmduscher kit has been the simplest and most popular way of equipping touring vehicles or boats & yachts with hot air heating and hot water at the same time. In contrast to technically complex combination devices, the kit consisting of two individual devices is less expensive and, above all, less prone to complete failure. And if necessary, it can even be repaired while traveling. The strength of the Warmduscher kit is that it is simple and the two main elements (heater and boiler) function separately. Defects in one component do not automatically affect the other. A defect in the boiler is unlikely due to the high quality of materials and workmanship with high pressure resistance - however, should damage occur for whatever reason, the heater will continue to run completely unimpressed and that is a good thing. Because not being able to take a hot shower is one thing - spending the night in a completely chilled vehicle at perhaps -20 degrees is another. The Warm Shower Kit 2.0 is therefore a system that is simple to set up and easy to install. It is therefore perfect for DIY enthusiasts, but of course also for professional manufacturers who want to offer their customers a low-maintenance, trouble-free solution for their trips. Warm shower kit 2.0 - UPGRADE 2023The original Warm Shower Kit is now equipped with the combiBOIL hot water boiler. This upgrade makes hot water production even more versatile, convenient and safe. Choose the right one for your projectThe Warmduscher upgrade kit 2.0 is available with the combiBoil hot water boiler in various versions and three sizes. Please note:Especially if your heater is already installed, when selecting the volume, pay attention not only to how much water you want to heat, but also to how much space you really have left in the camper to install the boiler sensibly (it should be installed as straight as possible and not far away from the heater).Your currently selected configuration is displayed in the product title and in the drop-down menu. Scope of delivery: 1x combiBOIL hot water boiler with 7, 9 or 12 l capacity, with stainless steel boiler and heat exchanger, in the variant selected above Comfort Boiler Control control panel 2 x adapters for the hot air connections of the boiler 1x adjustable thermostatic mixing valve / scalding protection 2 x brass hose nozzles 1 x screw-on hose nozzle 2 x T-piece for water pipe 1 x G1/2" steel flex hose for the heat-resistant connection between the boiler and mixer Water hosesIf the water is to be used for drinking or cooking, we strongly recommend that the hoses are certified accordingly. This ensures that no harmful substances are transferred to the drinking water and that the taste and composition are not altered by the material.Drinking water-certified hose lines for hot and cold water are available here. Pressure reducer:The boiler is made of high-quality stainless steel and is precisely manufactured. Nevertheless, the inlet pressure should be limited to 1.5 bar.In all pressurized water systems and systems with submersible pumps with a built-in or separate non-return valve, a pressure reducer should always be used upstream of the boiler and set to 1 to 1.5 bar.You can find pressure reducers with pressure gauges under the following links.A safety valve for releasing excessive pressure no longer needs to be purchased separately with the Warm Shower Kit 2.0. combiBOIL has installed this ex works. Water pump:A decent pump brings the system up to the required pressure and circulates it. It must be powerful enough to ensure a good and even flow even with water filtration and allow the water system to run smoothly. Provided it is durable and repairable. You can get this pump here.