Accessories Dashboard Mounting Point for New Defender L663 Practical mounts for cell phones, navigation devices, tablets, and other gadgets are indispensable, because even the latest cars with all their "connectivity" don't deliver everything an off-roader, overland explorer or ambitious camper requires. However, cheap plastic mounts are usually a waste of money and not everyone wants to stick suction cups to their windows either. Our mounting plates for the side handles on the dashboard of the New Defender are designed to support heavy duty mounts – like those from market leader RAM Mounts. The plate’s tight hold makes sure that nothing wobbles, collapses or falls off. But most of all, there are no suction cups involved as they tend to come loose when off-roading or speeding along bumpy dirt roads.The mounting plate is powder-coated black to match the interior of the new Landy and you simply fasten it with the existing screws of the handle. No drilling is required and removal is as easy as installation. Three strong, internally threaded 6 mm screw holes (M6) allow you to mount ball joints, brackets and other mounting equipment, either from RAM Mounts or other brands. In our bundle solution, the mounting plate comes with a 1-inch ball (type B) from RAM Mounts. Available with or without RAM Mount ball.  

Mounting plate air intake for CB radio antennas, Land Rover Defender, for right-hand drive (RHD) This mounting plate ensures optimum mounting of a CB antenna on the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the right-hand (as seen from the driver's seat) ventilation grille / air intake. For left-hand drive vehicles, you can find the mounting plate here in our shop. As the Defender is made of aluminium, unfortunately no magnetic antenna base will hold. We have therefore designed a plate made of sheet steel with a suitable opening for the cable. This plate allows you to attach an antenna with a magnetic base, which you can easily remove if necessary.  Scope of delivery: - Mounting plate - 1 m ground cable - Mounting material

Mounting plate for CB antennas on Land Rover Defender, for left-hand drive (LHD) This mounting plate optimally attaches a CB antenna to the air intake of the Land Rover Defender. For this purpose, the mounting plate is installed on the left (as seen from the driver's seat) ventilation grille / on the air inlet. For right-hand drive vehicles (UK), please contact us by phone or e-mail. Please select the suitable variant for you: fixed mounting or as a magnet. Delivery: mounting plate 1 m ground cable mounting material

Allows you to easily install 100 mm or 130 mm speakers in your Land Rover Defender, either slim (16 mm) or voluminous (27 mm) designs. Ships in pairs

HELIX S 4XThe new S speaker series turns every journey into a special sound experience with high sound quality The 2-way coaxial system scores with its extraordinary sound quality and the new, timelessly elegant design. Equally unique, sensitive and crystal clear, the silk dome of the tweeter conjures up the music in the room. Due to its central arrangement in the low-mid speaker, the music is perceived as a point source of sound and thus optimizes the tonal balance. The result is an incredibly homogeneous and natural sound. The stiff and at the same time light diaphragm of the bass-midrange driver consists of a new type of basalt fiber-paper compound. A perfect combination to guarantee clear, unadulterated sound even at high volumes. The S coaxial system plays in top form in conjunction with a power amplifier from Audiotec Fischer. A superlative sound experience Properties: 100 mm bass-midrange driver with a new type of basalt fiber paper compound membrane - an ideal combination of low weight, high rigidity and internal damping Specially shaped rubber surround for a larger effective membrane area and extended maximum stroke 19 mm tweeter with coated silk dome for balanced, natural reproduction and minimal compression effects Basket in individual HELIX design with additional ventilation openings for optimized cooling of the voice coil for high load capacity Separate inline crossover with 6/6 dB slope and integrated tweeter protection Technical specifications:Power RMS / max. 60/120 wattsFrequency range 80 Hz - 25,000 HzImpedance 4 ΩEfficiency 1 W / 1 m 89 dBMembrane material HT: coated silk dome; MT: -; TT: basalt fiber paper compoundSeparate crossover, 6/6 dB slopeOutside diameter 102 mmInstallation diameter 92.3 mmInstallation depth 46.5 mmDimensions crossover 59 x 49 x 24 mm Scope of delivery:2 x coaxial loudspeakers HELIX S 4X2 x frequency crossover1 x mounting material1 x instruction manual1 x installation template

HELIX S 42C.2 Excellent sound qualityWith the S speaker series, every journey becomes a special sound experience. The sophisticated design and the use of the latest technologies guarantee excellent sound characteristics with powerful bass, precise mids and crystal-clear highs. Elegant designIn addition to its excellent sound characteristics, the S 42C.2 also impresses with its elegant, timeless appearance. The transparent "Flex-Crossover" with its high-quality components and the elegant aluminum housing of the tweeter in particular make this system a real feast for the eyes. Simple integrationThe well thought-out design with low installation depths, a removable tweeter housing and the very compact and innovative "Flex-Crossover" crossover offer considerable scope for installation - even where space is particularly limited. In addition, cabling between the individual components is simple thanks to plug & play connection cables. Maximum flexibility - "Flex-Crossover"The new "Flex-Crossover" crossover is not only a visual highlight, but also has a number of technical refinements. In order to drastically reduce the dimensions once again, the circuit board can also be installed without a housing in a supplied foam or split in two for separate installation (e.g. tweeter in the A-pillar, woofer in the door). In addition to a 3-stage tweeter level adjustment and plug & play cable connections, the crossover is also equipped with screw terminals for even greater flexibility when connecting with your own speaker cables. Features◾100 mm bass-midrange driver with innovative basalt fiber-paper compound cone - an ideal combination of low weight, high rigidity and internal damping◾25 mm tweeter in an elegant aluminum housing with coated silk dome tweeter for balanced, natural reproduction and minimal compression effects◾Basket in individual HELIX design with additional ventilation openings for optimized cooling of the voice coil for high power handling◾"Flex-Crossover" crossover with 12/12 dB slope, blocking circuit and 3-stage switchable tweeter level adjustment - separable and therefore perfectly suited for installation in vehicles with separate installation locations for tweeter and mid-bass driver◾Exclusive use of very high-quality components in the crossover, such as distortion-free air-core coils and low-loss Audiotec film capacitors in the tweeter branch Technical data Power RMS / Max.  70 / 140 Watt Frequency range 75 Hz - 25.000 Hz Impedance 4 Ω Efficiency 1 W / 1 m 89 dB Membrane material HT: Beschichtete SeidenkalotteMT: -TT: Basaltfaser-Papier-Compound Crossover  12/12 dB mit Sperrkreis, Hochtonschutz  und Hochton-Pegelanpassung Outer diameter HT: 51 mmMT: -TT: 102 mm Installation diameter HT: 45 mmMT: -TT: 92,3 mm Installation depth HT: 14 mmMT: -TT: 46,5 mm  Crossover dimensions  112 x77,5 x 27 mm   Scope of delivery 2 x HELIX S 1T tweeters incl. mounting material2 x HELIX S 4B bass-midrange drivers2 x Flex-Crossover crossover4 x foam mat1 x mounting material1 x operating instructions1 x mounting template

Funkfernbedienung für AUTOTERM Standheizungen With the included module and the certified radio remote control, you can control AUTOTERM Luft 2D and 4D (= Planar 2D12, Planar 44D12) parking heaters with 4 cables and AUTOTERM Flow 14S (=14TC-Mini) diesel pre-heaters by radio remote control. Think ahead and start the parking heater before you start your journey! Do you hate freezing while driving and are annoyed that it is only warm once you have arrived at your destination? Then these remote controls are perfect for you! With the included module and the radio transmitters, you can control 12-volt AUTOTERM parking heaters, parking heaters with 4 cables and AUTOTERM Flow 14D (formerly 14TC-Mini) diesel pre-heaters by radio remote control! The scope of delivery includes 2 transmitters and, of course, the module for connection to the parking heater. Scope of delivery: 2 transmitters Module for 12 volt Planar parking heaters incl. connection diagram All modems or radio remote controls are connected to the brown and white cable of the Planar. The Simcom has a prepared plug connection. The PU5 or PU27 control units can still be used. In contrast to other suppliers, our radio remote control is specially designed for Planar heaters and the receiver is housed in a waterproof and shockproof casing.    

The ALBRECHT AE 6110 has all the essential functions that you need. The highlight: With a width of only 10 cm and a height of 2.5 cm, it can easily be accommodated even in the smallest of spaces. With its die-cast housing, it is very stable. New: with integrated VOX function for hands-free speaking in the vehicle Properties: All European CB standards S-meter, 6-level LED indicators for RX and TX VOX hands-free function Receiving sensitivity adjustable (RF gain) Channel 9/19 direct selection button (EMG) Die cast housing 4 watt AM / FM Automatic squelch (ASQ), adjustable in 9 levels Further equipment features: Channel selection buttons on the microphone Channel search (scan) Keylock Socket for external speaker Technical specifications:Dimensions: 102 x 100 x 25 mm³Weight: 450 gSupply voltage: 13.2 V.Power consumption: 2 A max.Operating temperature range: -20 to +50 ° CAntenna input: UHF, SO-239Frequency error: <+/- 300 HzTransmission power: 4 wattsInterference transmissions: <4 nW (-54 dBm)Adjacent channel power: <20 µWFM frequency deviation: <1.9 kHzAM modulation depth: <90%Reception sensitivity: better than 1 μV (20 dB SINAD)Mirror selection: 70 dBAdjacent channel suppression: 60 dBAudio output: 1 watt into 8 ohmsFrequency response: 300-3000 Hz Conversion option for licensed amateur radio operators:10 m amateur radio band, 400 channel mode: 25,610-30,105 MHz, 8 watts Scope of delivery: AE 6110 CB radio, microphone with up / down buttons, microphone holder, mounting bracket with screws, instructions

The CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use. Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.

The Albrecht CB-radio VOX microphone offers the perfect solution for hands-free communication in any vehicle, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020. This microphone can be used with almost all CB-radios on the market to date. It comes with active noise canceling to filter out any background noise, to guarantee clear communication. The battery lasts about 60h and can charge while in use Details: hands-free communication, following § 23 (1a) of the German road traffic regulations. This paragraph outlaws the usage of handheld microphones since the 01.07.2020 active noise canceling, eliminating irritating background noises VOX sensitivity adjustable in 4 levels VOX delay adjustable in 4 levels impedance: 4.7K ohm sensitivity: -58db 3000mAh battery (rechargable) 60h battery life micro-USB charging port Up/Down button plug: 4-point connector Scope of delivery:VOX microphone, instructions, USB charging cable Compatible with:Midland M10, Midland M Zero Plus, Alan 100 Plus B, diverse Präsident Geräte, Lavayette, etc.

Albrecht CB radio VOX microphones offer the perfect solution for hands-free communication in vehicles in accordance with Section 23 (1a) of the Road Traffic Act, which prohibits the use of microphones by hand in vehicles from July 1st, 2020. These microphones can be used with almost all CB radios on the market. The integrated active noise cancellation function filters out disruptive background noise and offers very clear voice transmission. The integrated battery has an operating time of approx. 60 hours and can also be charged while the microphone is in use. Properties:► for hands-free communication in the vehicle (compliant with § 23 (1a) StVO, which prohibits the use of microphones by hand in vehicles from July 1st, 2020)► Active Noise Cancellation filters out disturbing background noise► VOX sensitivity adjustable in 4 levels► VOX delay adjustable in 4 levels► Impedance: 4.7K ohms► Sensitivity: -58db► Up / Down buttons► integrated battery 3,000 mAh (rechargeable)► Operating time: approx. 60 hours► Can be used while charging► Micro-USB charging socket on the microphone► Connection: 6-pin CB radio plug

The WP-24 hands-free system enables the Albrecht CB radios AE 6490 CT or AE 6491 CT to be used without having to take your hands off the steering wheel. The remote control can easily be mounted on the steering wheel and has a range of up to 7 meters. All you have to do is attach the supplied microphone near the driver (e.g. sun visor) and connect the receiver to the microphone socket of the radio, and you can start radio.The remote control can still be used to select the channels and switch ASQ on / off.The microphone sensitivity can be continuously adjusted according to the distance. From 2020, the legislature will stipulate that car and truck drivers who want to radio at the wheel must use a hands-free device for safety reasons. With an AE 6490/91 and the WP 24, Albrecht already offers a future-proof solution. Properties:- Channel selection and ASQ via remote control- Microphone sensitivity continuously adjustable- LED status display Scope of delivery:WP24 remote control incl. CR2032 battery, receiver, external microphone, steering wheel bracket, mounting screws

The following values ​​are calculated and displayed under microprocessor control: - Current solar power 0 - 999 W (watt) - Current solar power 0 - 60.0 A (ampere) - The geographic and weather-dependent influences show up immediately and unmistakably. This also applies to the orientation of the sun, partial shading or soiling of the solar modules. - Current solar battery voltage 7 - 32.0 V (volts) Allows conclusions to be drawn about the battery status (flashing warning display at under or Overvoltage of the battery) - Invited solar capacity 0 - 9999 Ah (ampere hours) - Invited solar energy 0 - 9999 kWh (kilowatt hours) The energy generated by the solar modules (Wh and kWh) and that charged into the battery Capacity (Ah) are measured, added up and displayed, even over days and weeks. The display values ​​can be individually reset to "zero" at any time for your own statistical purposes: Are the solar modules shaded or dirty or is something wrong? How much energy does my solar system actually deliver?In order to be able to answer these questions, VOTRONIC offers the LCD solar computer S, which is simply connected to the VOTRONIC solar charge controller of the SR and MPP series and immediately provides the required information. It is also possible to connect the LCD solar computer S to the controller at a later date, since the VOTRONIC solar charge controller already has are ready to plug in and provide the required signals. The connection is therefore kept extremely simple. The measured values ​​are clear and easy to use at the push of a button for better control and use of the solar system shown on the display. The display is backlit (switchable) and also from greater distances and very easy to read under lighting conditions. The LCD solar computer S is designed as a panel version to match the VOTRONIC module system and is both optically and also mechanically (uniform height 85 mm) to the other display modules. Small front panel dimensions and the particularly small installation depth of just 22 mm allows installation at almost any point. If the device is not installed countersunk, stands a corresponding add-on housing is available in our range of accessories. The connection to the solar controller is ready to plug in with the supplied 5 m long connection cable, which can be extended by a further 5 m. Technical specifications: Nominal battery voltage (DC) in [V] 12 and 24 Current consumption max. in [mA] 3 - 30 LC display with specific segments Display function W, A, V, Ah, Wh Measuring range 20 - 990 Dimensions (WxHxD) in [mm] 80 x 85 x 25 Installation dimensions (WxHxD) in [mm] 66 x 72 x 22 Weight in [g] 55 Approval marks CE, E-approval (EMC / vehicle directive) Ambient conditions, humidity: max. 95% room humidity, non-condensing Scope of delivery: 5 m connection cable, fastening screws, operating instructions, drilling template

Converting your 4x4 into a camper van or a utility vehicle is a tricky job, nearly impossible to plan in all its details from the outset. Only with time you’ll realize where switches should have gone or that an additional lamp or ancillary device could have been put somewhere else instead. Or there are safety regulations that prevent you from wiring certain switches into your dashboard, e.g. work or camping lights that mustn’t be switched on inadvertently while driving. And that’s when you simply decide to live with the compromises and inferior solutions because you simply dread the thought of having to re-wire everything. If you know this situation, the Wireless Connect RSU60 by Ring is for you. It lets you wire up to 8 devices easily and quickly into the tech hub, a centrally located connector panel, without the need for separate wiring of switches. All connected devices like lamps, gadgets and mechanisms are operated wireless by one remote control, wherever it is convenient. This comfortable and efficient system saves you time and materials and spares your nerves as well when something goes wrong or stops working. Faulty connections or other glitches can be easily traced from the one central tech hub, eliminating the need to take half the car apart as with hardwired solutions fitted behind dashboards and paneling or inside struts or conduits. The 12 V tech hub boasts a maximum ampage of 60 A and is designed for parallel operation of several devices. All connections are individually fused and a manual override guarantees additional safety. Moreover, battery protection ensures that battery voltage is constantly maintained and depletion is prevented. The remote switch buttons can be allocated as necessary and individually identified by an included set of stickers with different icons. The remote also features user-friendly backlit illumination, status lights and a sleep mode. Pairing the remote with the hub is as simple as pressing two buttons and unique signal pairing means that you can operate the same functions on the hub with two remote controls, one in the cabin and one in the back for example. This increases both comfort and safety. The remote is kept and charged in an included docking station.

Speedometer calibration kit for Suzuki Jimny from 2018 (Type GJ und HJ) This tachometer calibration kit can be used to correct the speed display and distance counter for vehicle conversions with a tire roll circumference that differs significantly from the series.Changes to the differential or larger tire roll circumference can thus be made acceptable.The ABS / ESP control unit sends a speed signal to the instrument cluster via CAN bus. The speedometer calibration kit is installed in front of the instrument cluster and corrects both the speed signal and the odometer in real time. The correction factor can be programmed via USB interface. The original wheel speed signals are retained. The function of the ABS / ESP control unit can therefore not be impaired. Technical specifications:EC type approval: E1 10R-036407Correction factor: 1-255%Default: 106%Power supply: 6-30V DCPower consumption sleep mode: 10 mACurrent consumption max .: 35 mATemperature range: -40 ° C / + 125 ° CDegree of protection: IP68 Also available for other vehicles on request.

High quality Land Rover Defender radio antenna The successor to the popular Hirschmann radio antenna, which is no longer available! This radio antenna has excellent radio reception and scores with high quality optics. Since conventional antenna feet are usually too big, we have decided here additionally for a special production for the Defender. This custom foot fits perfectly into the original opening in the Land Rover Defender fender. Since the Defender offers little space for a sticky antenna, we have made an off-road capable antenna suitable for Defender optics. With this antenna you also have no interference due to the wires of the windscreen heater! The Defender variant is suitable for all Land Rover Defender 90/110/130 with existing antenna or antenna bore. This radio antenna is manufactured by a well-known antenna manufacturer and supplemented by us with the right antenna base. Upon delivery, you will still receive the original foot of the antenna. You will need to remove it and mount it with the included Land Rover Defender mounting foot. The robust antenna is particularly suitable for off-road use and offers a comprehensive reception of AM, FM, DAB, DAB +! With DAB + you get the most modern reception variant that exists on the market. This allows a grandiose reception of your favorite radio stations! Incidentally, you will find a universal radio antenna here! Technical specifications: Antenna length: 45 cm Cable length: 295 cm Reception: AM, FM, DAB, DAB + Delivery: 1x radio antenna with original foot 1x mounting foot custom-made (specially made by us) 3 different SMA/SMB adabters for the most common DAB & DAB+ Devices 

Adapter for connecting 2 Alan PL259/6 plugs.

This CB mobile antenna scores with good SWR values - the fine-tuning of the SWR values is done by rings. Technical data: CB mobile antenna 1/4 lambda 120 channels Power rating: 40 watts Material: Stainless steel SWR Adjustable YES Length: 115 cm Cable length: 4 metres For fixed mounting The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio, you still need a PL259/6 plug for RG58 coaxial cable.

Radio 90 CB antenna for fixed mounting Technical data:  Length approx. 90 cm 200 W 4 m cable with DV plug 1/4 lambda The antenna has an open-ended cable to make it easier to lay the cable. A PL259/6 plug for RG58 coaxial cable is required for connection to a radio.

Adjustment adapter SpeedoHealer  When fitting new tire sizes, modern vehicles with a factory-integrated speedometer usually have a speedometer discrepancy, as this is often not configurable. In the long run, the incorrect speed indication is annoying and sometimes causes an incorrect total mileage (the odometer goes wrong) and consequently even a poorer resale value of the vehicle. The SpeedoHealer speedometer alignment is an inexpensive solution to avoid this problem. Suitable for TD5 vehicles from MY1998 to 2007 The alignment adapter is simply connected to the green speedometer sensor located on the transfer case of the Defender. The SpeedoHealer then detects the correct speed from the output pulse of the speedometer sensor. Functions of the SpeedoHealer: Speedometer adjustment or elimination of inaccuracy of the original speedometer.Conversion of kilometers to miles or miles to kilometers (useful for a vacation abroad or for imported vehicles)Accurate indication of the maximum speed driven at the push of a buttonNeutralization of the speed limiter on some vehicles

External GPS antenna for GeoSafe alarm and tracking tracker The external antenna improves the GPS reception of the GeoSafe alarm and tracking tracker. The antenna has a magnetic base that allows it to rest or hang on metal surfaces without slipping.Technical data:Frequency: 1575.42 MHZVoltage: 3,0 - 5,0 VoltCable length: 5 metres

Tent light remote control With this remote control, you can switch our 30 cm long tubular tent light or our 90 cm long tubular tent light on and off manually by remote control. The radio connection reaches a little more than 3 metres even through the tent material. You can attach the remote control to a key ring via the small attached carabiner.

DAB+ car splitter adapter, antenna amplifier and crossover With this active antenna splitter, you can use the vehicle's existing FM radio antenna for additional DAB / DAB+ reception. It is therefore ideal for retrofitting DAB receivers. There is no need for a time-consuming replacement or retrofitting of another antenna. The integrated amplifier compensates for the attenuation that usually occurs with antenna combiners and can even lead to better FM reception.Some radios apply a voltage of 12 V to the antenna cable, the so-called phantom power, which supplies the antenna amplifier. In this case, it is called an active antenna. Common receivers cannot provide this 12 V to operate the amplifier - you need a phantom power adapter. In contrast to many other antenna combiners on the market, this active antenna combiner also takes care of this task. An additional phantom power supply adapter is therefore not necessary!Please note that for the correct splitting of the signal, the frequency band of the active antenna must not be filtered. For this purpose, "DAB ANT POWER" must be set to "ON" in the setup of the radio (if available)! Suitable for DAB+ radios from e.g. JVC, SONY, Alpine, Pioneer etc.     DAB / DAB+ reception via the original antenna - no need to replace the antenna or retrofit a DAB antenna!    Also suitable for antennas with phantom power (active antennas) - no phantom power adapter necessary!    Decoupled signal outputs - no mutual interference in case of impedance fluctuations!    Suitable for antenna rod lengths from 30 cm to 100 cm. Technical data:    Antenna adapter length: approx. 34.5 cm    1 x SMA plug, gold-plated    1 x antenna plug    1 x antenna socket    12 V connection cable with fuse    Amplification: approx. 20 dB    Power consumption: 6 mA    Noise figure: <2 dB

RAM Mount ball and adapter (1" Size B) for passenger grab handle to mount smartphone, tablet, action cam, satnav, etc., for all Land Rover Defender Td4 (from MY 2007). It is possible to fit two of these adapter to the grab handle, e.g. for mounting a tablet device for navigation alongside your smartphone. Supplied with fixings but without further holders. Suitable RAM Mount device holders can be purchased seperately. All pictured items apart from the actual ball and fixings are for illustration purposes only.  For orders to the USA please contact seriesdefender.com and for orders to Canada rovalution.ca/

Alan PL259/6 plug, for RG58 coaxial cable PL259/6 plug, double pack, for assembling RG58 antenna cables.Required for the Alan ML130 and Alan ML145 magnetic antenna.

Cruise control for Land Rover Defender Td5 MY02-MY07 Especially on longer journeys, it's quite tiring to hold the throttle in the Defender. Our new cruise control puts an end to that.Now, at the touch of a button, Defender will maintain the desired cruising speed. The cruise control takes over the current speed and maintains it - exceptions:    if the engine power is insufficient (e.g. high speed and at the same time a significant rise in the road), the cruise control switches off for safety reasons.     when the brake or clutch pedal is pressed.The cruise control is operated via 2 supplied stainless steel buttons:    a SET button to hold and increase the current speed.     a RESET button for switching off the cruise control, as well as for resuming the last set speed.The delivery is made as a complete set incl. detailed and illustrated instructions, which also enable "occasional screwdrivers" to assemble it.Time required: about 1-2 hours.Conclusion: A "must" for all those who often drive on the motorway or undertake long-distance journeys - even the journey to the port in Genoa, for example, becomes a "relaxing" experience...Please note: Really only suitable for Td5 MY02-MY07. The decisive factor is the installed control unit. The identification number of the control unit must start with NNN or NNW! If the identification number begins with MSB, this cruise control is not suitable.

Adjustment adapter for electric speedometer / odometer When fitting new tyre sizes, modern vehicles with a factory-integrated speedometer usually have a speedometer discrepancy, as this is often not configurable. In the long run, the incorrect speed indication is annoying and sometimes results in an incorrect total kilometre reading (the odometer goes wrong) and consequently even in a poorer resale value of the vehicle. The speedometer adjustment with the adjustment adapter is an inexpensive solution to avoid this problem.Technical data:Power supply: 9 - 28 voltsQuiescent current consumption: 4.6 mA at 13.8 volts power supplyInput signal: min. 2 volt peak, potential-independent, max. 4.5 kHz at 12 volt input signal or max. 1.6 kHz at 5 volt input signalOutput voltage: square-wave signal equal to the operating voltage minus 1.3 volts, maximum 13.1 volts, maximum 5 kHzSecond output stage with sine wave signal

Replay XD1080 Tripod Mounting Kit For mounting the Replay XD1080 Action Cam on a standard tripod thread.

Replay XD1080 Suction Cup Mount The suction cup mount in two lengths allows you to mount up to two Replay XD1080 Action Cams on smooth surfaces.Please select whether you would like a long or short mounting arm and whether you would like to mount one or two cameras.

Tallon RAM Mount Adapter For mounting RAM Mount accessories to a Tallon base, with 25.4 mm / 1" (Size B) stainless steel mounting ball. The Tallon base adapter allows mounting of the extensive RAM Mount product range - e.g. mounts for Apple iPad, Apple iPhone, navigation devices, phones, etc. When using the Tallon Elite USB base, these can also be supplied with power and communicate with other devices via USB. Scope of delivery: adapter Delivery does not include other accessories. Mounting arms and device holder from RAM Mount must be purchased separately.

The 1/4 lambda antenna is easy to mount and offers a wide bandwidth incl. DV connection. It consists of a stainless steel radiator with flux points and a wing nut. The standing wave ratio is preset and can be changed by changing the radiator length. Mounting instructions: Drill a hole with a diameter of 12 mm at a point on the vehicle body.Deburr the hole and ensure a good conductive connection of the antenna flux.Then insert the antenna base from the outside of the body into the hole so that the corrugated side of the antenna joint faces the outside of the vehicle. Fit the plastic washer and the metal trident washer the right way round. Fit the toothed washer and screw on the nut loosely After aligning the base, tighten the nut on the inside of the body with a spanner Screw on the angle plug with the antenna cable (tip: seal with silicone to permanently seal the mounting point against rust) Mount the radiator with the threaded bolt on the antenna base Technical data: Frequency: MHz 26-28 Type: 1/4 Lambda Power rating: 300 W Radiator length: 130 cm Steel material: Stainless steel SWR Adjustable - SWR adjustment via length change: SWR preset Special features: Plug type DV Total length with base: 138 cm The antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.

Magnetic base antenna for CB radio, approx. 145 cm long. Technical data: Type: 5/8 LambdaPower rating: 200 WLength of steel: 148 cmRadiator material: stainless steelMagnetic base: 120 mm diameterThe antenna has a cable with an open end to make it easier to lay the cable. For connection to a radio set you still need a PL259/6 plug for RG58 coaxial cable.